8356a604f0
sbgemm: cooperlake: tuning for block params
2021-09-07 21:30:46 +08:00
7cddbf99b1
Make explicit conversion condition on _WIN64 flag
2021-08-31 14:36:44 +01:00
d1ed72fa87
[win/arm64]: Explicit casting for GMEMM_DEFAULT_ALIGN to create 64-bit value
...
Win64 uses LLP64 datamodel and unsigned long is only 32-bit. For 64-bit
architecture we need 64-bit mask to correctly generate address
2021-08-31 11:56:10 +01:00
af0a69f355
Add support for LOONGARCH64
2021-07-27 15:29:12 +08:00
a6351e32f0
Remove BLASLONG casts from SPARC entries
...
in response to https://github.com/xianyi/OpenBLAS/pull/3266#issuecomment-878637675
2021-07-14 21:09:36 +02:00
b7da75e4fd
WiP CORTEX A55 support
2021-06-19 21:37:51 +02:00
7dfc45e840
Remove casts for PPC/POWER and complete parameters for POWER3/4
2021-06-10 11:09:50 +02:00
198adea961
Changed default P/Q values for CGEMM and ZGEMM (Power10 only)
2021-03-19 10:05:23 -04:00
8cdf0825de
Add workaround for older gcc on ppc64be not supporting casts in defines
2021-03-16 21:20:05 +01:00
ecb4babcf4
remove inclusion of common.h again to avoid circular dependency
2021-03-14 17:36:51 +01:00
30d835168a
Merge pull request #3088 from xoviat/msvc
...
add misc fixes.
2021-03-14 17:14:28 +01:00
9579bd47e5
Modifying a couple paramaters in the "POWER10"-specific section of param.h, for performance enhancements for SGEMM and DGEMM.
2021-03-10 18:19:12 -05:00
63fa6c832e
Fix build issue on POWER8 with DYNAMIC_ARCH
...
Running make DYNAMIC_ARCH=1 on POWER 8 BE with gcc10.2 version, gives
the following error due to the difference in UNROLL_M/N.
'No rule to make target 'dgemm_incopy_POWER10.o', needed by kernel'
2021-02-11 21:28:03 -06:00
457ccc42c9
Merge branch 'develop' into msvc
2021-01-27 14:15:59 -06:00
ed652d8136
Added definitions for GEMM_PREFERED_SIZE and SWITCH_RATIO to the POWER9 and POWER10 specific sections of param.h.
2021-01-11 21:13:53 -05:00
83de62c20d
Merge pull request #3026 from martin-frbg/revert747
...
Revert PR747 - SYRK parameter changes for Haswell and related targets
2020-12-10 16:29:41 +01:00
4b548857d6
Add msa support for loongson
...
1. Using core loongson3r3 and loongson3r4 for loongson
2. Add DYNAMIC_ARCH for loongson
Change-Id: I1c6b54dbeca3a0cc31d1222af36a7e9bd6ab54c1
2020-12-09 10:28:46 +08:00
d71fe4ed4e
Remove GEMM_DEFAULT_UNROLL_MN parameters for Haswell and ZEN (introduced in PR747)
2020-12-08 21:07:57 +01:00
b0b14f4e9b
Change comments to C style for compatibility
2020-12-06 19:12:02 +01:00
41fe6e864e
POWER10: Update param.h
...
Increasing the values of DGEMM_DEFAULT_P and DGEMM_DEFAULT_Q helps
in improving performance ~10% for DGEMM.
2020-12-03 14:40:11 -06:00
fc35b72ae1
Refs #2899
...
Merge branch 'openblas-open-910' of git://github.com/damonyu1989/OpenBLAS into damonyu1989-openblas-open-910
2020-11-10 09:38:04 +08:00
913cc9a4ca
Merge branch 'develop' into risc-v
2020-11-10 09:18:25 +08:00
dd7a9cc5bf
POWER10: Change dgemm unroll factors
...
Changing the unroll factors for dgemm to 8 shows improved performance with
POWER10 MMA feature. Also made some minor changes in sgemm for edge cases.
2020-10-31 18:28:57 -05:00
d7ba7679b6
Merge branch 'develop' into risc-v
2020-10-16 23:27:38 +08:00
ef8e7d0279
Add the support for RISC-V Vector.
...
Change-Id: Iae7800a32f5af3903c330882cdf6f292d885f266
2020-10-15 16:09:02 +08:00
ca31c32693
Rename "HALF" and "sh" to "BFLOAT16" and "sb"
2020-10-11 23:49:22 +02:00
e740c4873d
Enable COOPERLAKE build target
...
Enable new build target platform -- COOPERLAKE. This target platform
supports all the SKYLAKEX supported ISAs + avx512bf16. So all the
SKYLAKEX specific kernels/drivers and related code are now extended
to be also active on COOPERLAKE. Besides, new BF16 related kernels
are active under this target.
2020-08-13 06:18:00 +08:00
e115c97e05
s390x/SGEMM: adjust default P and Q to multiples of M
...
We recently changed the register blocking for SGEMM on s390x to 16x4.
However, we did not adjust Q to a multiple of 16 and thus fell back to
the 8x4 kernel at each block's margin, without need. Adjust P and Q to
multiples of 16 to employ the faster 16x4 kernel for complete full-sized
blocks.
Signed-off-by: Marius Hillenbrand <mhillen@linux.ibm.com>
2020-08-11 12:56:46 +02:00
4e1be0e481
ARM64: Add THUNDERX3T110 Target
2020-07-26 23:32:24 -07:00
bd2498c886
Use POWER6 GEMM parameters on 32bit POWER8
2020-07-14 18:07:58 +02:00
d23419accc
powerpc: Optimized SHGEMM kernel for POWER10
...
This patch introduces new optimized version of SHGEMM kernel
using power10 Matrix-Multiply Assist (MMA) feature introduced in
POWER ISA v3.1. This patch makes use of new POWER10 compute instructions
for matrix multiplication operation.
Tested on simulator and there are no new test failures.
2020-06-25 22:19:08 -05:00
9fe930f205
powerpc: Add support for future processor
...
This is the initial patch to support build infrastructure
for POWER10 architecture.
2020-06-11 15:47:20 -05:00
f16e39554d
Change PPCG4 CGEMM_M to match kernel change
2020-06-03 09:15:29 +02:00
ea5bdc3f72
split cortex-a53 param to match 8x8 kernel
2020-05-20 22:34:47 +08:00
1b0b4349a1
s390x/Z14: Change register blocking for SGEMM to 16x4
...
Change register blocking for SGEMM (and STRMM) on z14 from 8x4 to 16x4
by adjusting SGEMM_DEFAULT_UNROLL_M and choosing the appropriate copy
implementations. Actually make KERNEL.Z14 more flexible, so that the
change in param.h suffices. As a result, performance for SGEMM improves
by around 30% on z15.
On z14, FP SIMD instructions can operate on float-sized scalars in
vector registers, while z13 could do that for double-sized scalars only.
Thus, we can double the amount of elements of C that are held in
registers in an SGEMM kernel.
Signed-off-by: Marius Hillenbrand <mhillen@linux.ibm.com>
2020-05-12 15:59:51 +02:00
03ff213c51
Increase POWER8 ZGEMM_R and use same R values for POWER9
...
fixes lapack-test zger failures seen in #2299 after application of my PR #2551
2020-04-24 21:46:54 +02:00
00172d440b
Typo fix in MIPS24K addition
2020-04-18 21:16:49 +02:00
61bbae3ac1
Handle MIPS24K like P5600
...
and allow enforcing TARGET=1004K as well (omission from earlier 1004K merge and later introduction of TARGET check)
2020-04-18 21:09:32 +02:00
a33d177430
Increase default BUFFER_SIZE on ARM, ZARCH and newer x86_64, add GEMM_R for POWER8/9
...
As shown in #2538 , default buffersizes on some platforms were smaller than required in memory.c
and the requirement could never be fulfilled for a calculated GEMM_R on PPC given the fomula used
2020-04-12 19:44:48 +02:00
567d2760e6
Merge pull request #2520 from wjc404/develop
...
Fix avx512 sgemm performance bug when ldc is a multiple of 1024
2020-03-30 20:15:59 +02:00
64daad4365
Update param.h
2020-03-20 21:46:18 +00:00
ea8eec5d17
Merge pull request #2422 from wjc404/develop
...
Adjust SkylakeX GEMM3M parameters, add an AVX512 STRMM kernel and fix performance bugs in AVX2 s/c/z GEMM
2020-02-29 19:07:35 +01:00
c623a965f9
Add Neoverse-N1 core
...
The implementation is a hybird of the ARMV8 one with some of the
improved TX2 rountines along with specifying -march=v8.2-a
2020-02-29 03:22:04 +00:00
265ab484c8
Change default RISC-V 64-bit corename to RISCV64_GENERIC
...
e.g. make CC=riscv64-unknown-linux-gnu-gcc FC=riscv64-unknown-linux-gnu-gfortran TARGET=RISCV64_GENERIC HOSTCC=gcc
2020-02-27 14:46:15 +08:00
4aa2d89217
Merge branch 'develop' into risc-v
2020-02-27 13:53:49 +08:00
8164fd1328
Always assume server-class cpu count for TSV110 and EMAG8180
2020-02-26 22:19:57 +01:00
71e5669c3e
Add preliminary support for EMAG8180 ARMV8 processor
2020-02-19 18:57:26 +01:00
b0558c11b9
Update param.h
2020-02-16 23:01:31 +08:00
83b6be7976
Update param.h
2020-02-04 19:55:26 +08:00
f3f969f681
Update param.h
2020-02-03 21:34:12 +08:00
Wangyang Guo
Niyas Sait
gxw
Martin Kroeker
User User-User
Gordon Fossum
Rajalakshmi Srinivasaraghavan
xoviat
gxw
Xianyi Zhang
Zhang Xianyi
damonyu
Chen, Guobing
Marius Hillenbrand
Ashwin Sekhar T K
张丹枫
wjc404
Ali Saidi