From f71d2b9ee6d09e732dd9f6948df813a67cc5437d Mon Sep 17 00:00:00 2001 From: Huo Linhe Date: Wed, 18 Jan 2023 11:18:18 +0800 Subject: [PATCH 1/2] docs: update helm chart version to 3.0.2 --- docs/en/10-deployment/05-helm.md | 12 ++++++------ docs/zh/10-deployment/05-helm.md | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/docs/en/10-deployment/05-helm.md b/docs/en/10-deployment/05-helm.md index a4fa681000..61fbb17e0d 100644 --- a/docs/en/10-deployment/05-helm.md +++ b/docs/en/10-deployment/05-helm.md @@ -22,7 +22,7 @@ Helm uses the kubectl and kubeconfig configurations to perform Kubernetes operat To use TDengine Chart, download it from GitHub: ```bash -wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.0.tgz +wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.2.tgz ``` @@ -38,7 +38,7 @@ With minikube, the default value is standard. Use Helm commands to install TDengine: ```bash -helm install tdengine tdengine-3.0.0.tgz \ +helm install tdengine tdengine-3.0.2.tgz \ --set storage.className= ``` @@ -46,7 +46,7 @@ helm install tdengine tdengine-3.0.0.tgz \ You can configure a small storage size in minikube to ensure that your deployment does not exceed your available disk space. ```bash -helm install tdengine tdengine-3.0.0.tgz \ +helm install tdengine tdengine-3.0.2.tgz \ --set storage.className=standard \ --set storage.dataSize=2Gi \ --set storage.logSize=10Mi @@ -83,14 +83,14 @@ You can configure custom parameters in TDengine with the `values.yaml` file. Run the `helm show values` command to see all parameters supported by TDengine Chart. ```bash -helm show values tdengine-3.0.0.tgz +helm show values tdengine-3.0.2.tgz ``` Save the output of this command as `values.yaml`. Then you can modify this file with your desired values and use it to deploy a TDengine cluster: ```bash -helm install tdengine tdengine-3.0.0.tgz -f values.yaml +helm install tdengine tdengine-3.0.2.tgz -f values.yaml ``` @@ -107,7 +107,7 @@ image: prefix: tdengine/tdengine #pullPolicy: Always # Overrides the image tag whose default is the chart appVersion. -# tag: "3.0.0.0" +# tag: "3.0.2.0" service: # ClusterIP is the default service type, use NodeIP only if you know what you are doing. diff --git a/docs/zh/10-deployment/05-helm.md b/docs/zh/10-deployment/05-helm.md index 9a3b21f092..07d77506f7 100644 --- a/docs/zh/10-deployment/05-helm.md +++ b/docs/zh/10-deployment/05-helm.md @@ -23,7 +23,7 @@ Helm 会使用 kubectl 和 kubeconfig 的配置来操作 Kubernetes，可以参 TDengine Chart 尚未发布到 Helm 仓库，当前可以从 GitHub 直接下载： ```bash -wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.0.tgz +wget https://github.com/taosdata/TDengine-Operator/raw/3.0/helm/tdengine-3.0.2.tgz ``` @@ -39,7 +39,7 @@ kubectl get storageclass 之后，使用 helm 命令安装： ```bash -helm install tdengine tdengine-3.0.0.tgz \ +helm install tdengine tdengine-3.0.2.tgz \ --set storage.className= ``` @@ -47,7 +47,7 @@ helm install tdengine tdengine-3.0.0.tgz \ 在 minikube 环境下，可以设置一个较小的容量避免超出磁盘可用空间： ```bash -helm install tdengine tdengine-3.0.0.tgz \ +helm install tdengine tdengine-3.0.2.tgz \ --set storage.className=standard \ --set storage.dataSize=2Gi \ --set storage.logSize=10Mi @@ -84,14 +84,14 @@ TDengine 支持 `values.yaml` 自定义。 通过 helm show values 可以获取 TDengine Chart 支持的全部 values 列表： ```bash -helm show values tdengine-3.0.0.tgz +helm show values tdengine-3.0.2.tgz ``` 你可以将结果保存为 values.yaml，之后可以修改其中的各项参数，如 replica 数量，存储类名称，容量大小，TDengine 配置等，然后使用如下命令安装 TDengine 集群： ```bash -helm install tdengine tdengine-3.0.0.tgz -f values.yaml +helm install tdengine tdengine-3.0.2.tgz -f values.yaml ``` @@ -108,7 +108,7 @@ image: prefix: tdengine/tdengine #pullPolicy: Always # Overrides the image tag whose default is the chart appVersion. -# tag: "3.0.0.0" +# tag: "3.0.2.0" service: # ClusterIP is the default service type, use NodeIP only if you know what you are doing. From 90e8899ea38a17e3302185078314420dd858c860 Mon Sep 17 00:00:00 2001 From: Shuduo Sang Date: Wed, 18 Jan 2023 11:32:51 +0800 Subject: [PATCH 2/2] fix: typos --- docs/en/10-deployment/05-helm.md | 8 ++++---- docs/zh/10-deployment/05-helm.md | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/docs/en/10-deployment/05-helm.md b/docs/en/10-deployment/05-helm.md index 61fbb17e0d..90baa5f445 100644 --- a/docs/en/10-deployment/05-helm.md +++ b/docs/en/10-deployment/05-helm.md @@ -155,15 +155,15 @@ clusterDomainSuffix: "" # See the [Configuration Variables](../../reference/config) # # Note: -# 1. firstEp/secondEp: should not be setted here, it's auto generated at scale-up. -# 2. serverPort: should not be setted, we'll use the default 6030 in many places. -# 3. fqdn: will be auto generated in kubenetes, user should not care about it. +# 1. firstEp/secondEp: should not be set here, it's auto generated at scale-up. +# 2. serverPort: should not be set, we'll use the default 6030 in many places. +# 3. fqdn: will be auto generated in kubernetes, user should not care about it. # 4. role: currently role is not supported - every node is able to be mnode and vnode. # # Btw, keep quotes "" around the value like below, even the value will be number or not. taoscfg: # Starts as cluster or not, must be 0 or 1. - # 0: all pods will start as a seperate TDengine server + # 0: all pods will start as a separate TDengine server # 1: pods will start as TDengine server cluster. [default] CLUSTER: "1" diff --git a/docs/zh/10-deployment/05-helm.md b/docs/zh/10-deployment/05-helm.md index 07d77506f7..b2c405033f 100644 --- a/docs/zh/10-deployment/05-helm.md +++ b/docs/zh/10-deployment/05-helm.md @@ -4,7 +4,7 @@ title: 使用 Helm 部署 TDengine 集群 description: 使用 Helm 部署 TDengine 集群的详细指南 --- -Helm 是 Kubernetes 的包管理器，上一节使用 Kubernets 部署 TDengine 集群的操作已经足够简单，但 Helm 依然可以提供更强大的能力。 +Helm 是 Kubernetes 的包管理器，上一节使用 Kubernetes 部署 TDengine 集群的操作已经足够简单，但 Helm 依然可以提供更强大的能力。 ## 安装 Helm @@ -156,15 +156,15 @@ clusterDomainSuffix: "" # See the variable list at https://www.taosdata.com/cn/documentation/administrator . # # Note: -# 1. firstEp/secondEp: should not be setted here, it's auto generated at scale-up. -# 2. serverPort: should not be setted, we'll use the default 6030 in many places. -# 3. fqdn: will be auto generated in kubenetes, user should not care about it. +# 1. firstEp/secondEp: should not be set here, it's auto generated at scale-up. +# 2. serverPort: should not be set, we'll use the default 6030 in many places. +# 3. fqdn: will be auto generated in kubernetes, user should not care about it. # 4. role: currently role is not supported - every node is able to be mnode and vnode. # # Btw, keep quotes "" around the value like below, even the value will be number or not. taoscfg: # Starts as cluster or not, must be 0 or 1. - # 0: all pods will start as a seperate TDengine server + # 0: all pods will start as a separate TDengine server # 1: pods will start as TDengine server cluster. [default] CLUSTER: "1"