diff --git a/docs/en/14-reference/06-taosdump.md b/docs/en/14-reference/06-taosdump.md
index 96e68d0edb..2105ba83fa 100644
--- a/docs/en/14-reference/06-taosdump.md
+++ b/docs/en/14-reference/06-taosdump.md
@@ -29,7 +29,7 @@ There are two ways to install taosdump:
 
 1. backing up all databases: specify `-A` or `-all-databases` parameter.
 2. backup multiple specified databases: use `-D db1,db2,... ` parameters;
-3. back up some super or normal tables in the specified database: use `-dbname stbname1 stbname2 tbname1 tbname2 ... ` parameters. Note that the first parameter of this input sequence is the database name, and only one database is supported. The second and subsequent parameters are the names of super or normal tables in that database, separated by spaces.
+3. back up some super or normal tables in the specified database: use `dbname stbname1 stbname2 tbname1 tbname2 ... ` parameters. Note that the first parameter of this input sequence is the database name, and only one database is supported. The second and subsequent parameters are the names of super or normal tables in that database, separated by spaces.
 4. back up the system log database: TDengine clusters usually contain a system database named `log`. The data in this database is the data that TDengine runs itself, and the taosdump will not back up the log database by default. If users need to back up the log database, users can use the `-a` or `-allow-sys` command-line parameter. 
 5. Loose mode backup: taosdump version 1.4.1 onwards provides `-n` and `-L` parameters for backing up data without using escape characters and "loose" mode, which can reduce the number of backups if table names, column names, tag names do not use escape characters. This can also reduce the backup data time and backup data footprint. If you are unsure about using `-n` and `-L` conditions, please use the default parameters for "strict" mode backup. See the [official documentation](/taos-sql/escape) for a description of escaped characters.
 
@@ -104,7 +104,10 @@ Usage: taosdump [OPTION...] dbname [tbname ...]
                              use letter and number only. Default is NOT.
   -n, --no-escape            No escape char '`'. Default is using it.
   -T, --thread-num=THREAD_NUM   Number of thread for dump in file. Default is
-                             5.
+                             8.
+  -C, --cloud=CLOUD_DSN      specify a DSN to access TDengine cloud service
+  -R, --restful              Use RESTful interface to connect TDengine
+  -t, --timeout=SECONDS      The timeout seconds for websocket to interact.
   -g, --debug                Print debug info.
   -?, --help                 Give this help list
       --usage                Give a short usage message
diff --git a/docs/en/20-third-party/09-emq-broker.md b/docs/en/20-third-party/09-emq-broker.md
index 8dfa09e6c7..0900dd3d75 100644
--- a/docs/en/20-third-party/09-emq-broker.md
+++ b/docs/en/20-third-party/09-emq-broker.md
@@ -16,6 +16,7 @@ The following preparations are required for EMQX to add TDengine data sources co
 
 Depending on the current operating system, users can download the installation package from the [EMQX official website](https://www.emqx.io/downloads) and execute the installation. After installation, use `sudo emqx start` or `sudo systemctl start emqx` to start the EMQX service.
 
+Note: this chapter is based on EMQX v4.4.5. Other version of EMQX probably change its user interface, configuration methods or functions.
 
 ## Create Database and Table
 
@@ -31,7 +32,7 @@ Note: The table schema is based on the blog [(In Chinese) Data Transfer, Storage
 
 ## Configuring EMQX Rules
 
-Since the configuration interface of EMQX differs from version to version, here is v4.4.3 as an example. For other versions, please refer to the corresponding official documentation.
+Since the configuration interface of EMQX differs from version to version, here is v4.4.5 as an example. For other versions, please refer to the corresponding official documentation.
 
 ### Login EMQX Dashboard
 
diff --git a/docs/zh/14-reference/06-taosdump.md b/docs/zh/14-reference/06-taosdump.md
index 95ee20bfba..625499a949 100644
--- a/docs/zh/14-reference/06-taosdump.md
+++ b/docs/zh/14-reference/06-taosdump.md
@@ -107,7 +107,10 @@ Usage: taosdump [OPTION...] dbname [tbname ...]
                              use letter and number only. Default is NOT.
   -n, --no-escape            No escape char '`'. Default is using it.
   -T, --thread-num=THREAD_NUM   Number of thread for dump in file. Default is
-                             5.
+                             8.
+  -C, --cloud=CLOUD_DSN      specify a DSN to access TDengine cloud service
+  -R, --restful              Use RESTful interface to connect TDengine
+  -t, --timeout=SECONDS      The timeout seconds for websocket to interact.
   -g, --debug                Print debug info.
   -?, --help                 Give this help list
       --usage                Give a short usage message
diff --git a/docs/zh/20-third-party/09-emq-broker.md b/docs/zh/20-third-party/09-emq-broker.md
index 84b1027f6b..dd98374558 100644
--- a/docs/zh/20-third-party/09-emq-broker.md
+++ b/docs/zh/20-third-party/09-emq-broker.md
@@ -17,6 +17,7 @@ MQTT 是流行的物联网数据传输协议，[EMQX](https://github.com/emqx/em
 
 用户可以根据当前的操作系统，到 EMQX 官网下载安装包，并执行安装。下载地址如下：<https://www.emqx.io/zh/downloads>。安装后使用 `sudo emqx start` 或 `sudo systemctl start emqx` 启动 EMQX 服务。
 
+注意：本文基于 EMQX v4.4.5 版本，其他版本由于相关配置界面、配置方法以及功能可能随着版本升级有所区别。
 
 ## 创建数据库和表
 
@@ -32,7 +33,7 @@ CREATE TABLE sensor_data (ts TIMESTAMP, temperature FLOAT, humidity FLOAT, volum
 
 ## 配置 EMQX 规则
 
-由于 EMQX 不同版本配置界面所有不同，这里仅以 v4.4.3 为例，其他版本请参考相应官网文档。
+由于 EMQX 不同版本配置界面所有不同，这里仅以 v4.4.5 为例，其他版本请参考相应官网文档。
 
 ### 登录 EMQX Dashboard
 
diff --git a/source/client/src/clientMsgHandler.c b/source/client/src/clientMsgHandler.c
index db33532aef..4217cf08b3 100644
--- a/source/client/src/clientMsgHandler.c
+++ b/source/client/src/clientMsgHandler.c
@@ -30,6 +30,10 @@ int32_t genericRspCallback(void* param, SDataBuf* pMsg, int32_t code) {
   SRequestObj* pRequest = param;
   setErrno(pRequest, code);
 
+  if (NEED_CLIENT_RM_TBLMETA_REQ(pRequest->type)) {
+    removeMeta(pRequest->pTscObj, pRequest->targetTableList);
+  }
+
   taosMemoryFree(pMsg->pData);
   if (pRequest->body.queryFp != NULL) {
     pRequest->body.queryFp(pRequest->body.param, pRequest, code);
diff --git a/source/dnode/mnode/impl/src/mndStb.c b/source/dnode/mnode/impl/src/mndStb.c
index 0fea400725..3e747b66c8 100644
--- a/source/dnode/mnode/impl/src/mndStb.c
+++ b/source/dnode/mnode/impl/src/mndStb.c
@@ -531,7 +531,7 @@ int32_t mndCheckCreateStbReq(SMCreateStbReq *pCreate) {
   }
 
   if (pCreate->numOfColumns < TSDB_MIN_COLUMNS || pCreate->numOfColumns > TSDB_MAX_COLUMNS) {
-    terrno = TSDB_CODE_MND_INVALID_STB_OPTION;
+    terrno = TSDB_CODE_PAR_INVALID_COLUMNS_NUM;
     return -1;
   }
 
@@ -542,7 +542,7 @@ int32_t mndCheckCreateStbReq(SMCreateStbReq *pCreate) {
 
   SField *pField = taosArrayGet(pCreate->pColumns, 0);
   if (pField->type != TSDB_DATA_TYPE_TIMESTAMP) {
-    terrno = TSDB_CODE_MND_INVALID_STB_OPTION;
+    terrno = TSDB_CODE_PAR_INVALID_FIRST_COLUMN;
     return -1;
   }
 
diff --git a/source/dnode/mnode/impl/src/mndStream.c b/source/dnode/mnode/impl/src/mndStream.c
index 5e8867fdfb..b8501db9fb 100644
--- a/source/dnode/mnode/impl/src/mndStream.c
+++ b/source/dnode/mnode/impl/src/mndStream.c
@@ -437,7 +437,6 @@ static int32_t mndCreateStbForStream(SMnode *pMnode, STrans *pTrans, const SStre
   pField->bytes = 8;
 
   if (mndCheckCreateStbReq(&createReq) != 0) {
-    terrno = TSDB_CODE_INVALID_MSG;
     goto _OVER;
   }
 
diff --git a/source/libs/function/src/builtins.c b/source/libs/function/src/builtins.c
index ae07651402..19c8349551 100644
--- a/source/libs/function/src/builtins.c
+++ b/source/libs/function/src/builtins.c
@@ -1461,15 +1461,14 @@ static int32_t translateInterp(SFunctionNode* pFunc, char* pErrBuf, int32_t len)
       }
 
       SValueNode* pValue = (SValueNode*)nodesListGetNode(pFunc->pParameterList, i);
-      int32_t ret = convertStringToTimestamp(paraType, pValue->datum.p, dbPrec, &timeVal[i - 1]);
+      int32_t     ret = convertStringToTimestamp(paraType, pValue->datum.p, dbPrec, &timeVal[i - 1]);
       if (ret != TSDB_CODE_SUCCESS) {
         return invaildFuncParaValueErrMsg(pErrBuf, len, pFunc->functionName);
       }
     }
 
     if (timeVal[0] > timeVal[1]) {
-      return buildFuncErrMsg(pErrBuf, len, TSDB_CODE_FUNC_FUNTION_ERROR,
-                             "INTERP function invalid time range");
+      return buildFuncErrMsg(pErrBuf, len, TSDB_CODE_FUNC_FUNTION_ERROR, "INTERP function invalid time range");
     }
   }
 
@@ -2136,7 +2135,7 @@ const SBuiltinFuncDefinition funcMgtBuiltins[] = {
   {
     .name = "apercentile",
     .type = FUNCTION_TYPE_APERCENTILE,
-    .classification = FUNC_MGT_AGG_FUNC | FUNC_MGT_TIMELINE_FUNC,
+    .classification = FUNC_MGT_AGG_FUNC,
     .translateFunc = translateApercentile,
     .getEnvFunc   = getApercentileFuncEnv,
     .initFunc     = apercentileFunctionSetup,