Merge pull request #21857 from taosdata/docs/adamji/TD-24884

docs: rust connector docs improvement

docs/en/14-reference/03-connector/06-rust.mdx

@@ -31,21 +31,57 @@ Websocket connections are supported on all platforms that can run Go.
 
 | connector-rust version |  TDengine version |                   major features                    |
 | :----------------: | :--------------: | :--------------------------------------------------: |
-|       v0.8.10       |      3.0.5.0 or later    | TMQ: Get consuming progress and seek offset to consume. |
+|       v0.8.12       |      3.0.5.0 or later    | TMQ: Get consuming progress and seek offset to consume. |
 |       v0.8.0       |      3.0.4.0     | Support schemaless insert. |
 |       v0.7.6       |      3.0.3.0     | Support req_id in query. |
 |       v0.6.0       |      3.0.0.0     | Base features. |
 
 The Rust Connector is still under rapid development and is not guaranteed to be backward compatible before 1.0. We recommend using TDengine version 3.0 or higher to avoid known issues.
 
-## Installation
+## Handling exceptions
+
+After the error is reported, the specific information of the error can be obtained:
+
+```rust
+match conn.exec(sql) {
+    Ok(_) => {
+        Ok(())
+    }
+    Err(e) => {
+        eprintln!("ERROR: {:?}", e);
+        Err(e)
+    }
+}
+```
+
+## TDengine DataType vs. Rust DataType
+
+TDengine currently supports timestamp, number, character, Boolean type, and the corresponding type conversion with Rust is as follows:
+
+| TDengine DataType | Rust DataType     |
+| ----------------- | ----------------- |
+| TIMESTAMP         | Timestamp         |
+| INT               | i32               |
+| BIGINT            | i64               |
+| FLOAT             | f32               |
+| DOUBLE            | f64               |
+| SMALLINT          | i16               |
+| TINYINT           | i8                |
+| BOOL              | bool              |
+| BINARY            | Vec<u8\>          |
+| NCHAR             | String            |
+| JSON              | serde_json::Value |
+
+Note: Only TAG supports JSON types
+
+## Installation Steps
 
 ### Pre-installation preparation
 
 * Install the Rust development toolchain
 * If using the native connection, please install the TDengine client driver. Please refer to [install client driver](/reference/connector#install-client-driver)
 
-### Add taos dependency
+### Install the connectors
 
 Depending on the connection method, add the [taos][taos] dependency in your Rust project as follows:
 
@@ -146,7 +182,8 @@ let builder = TaosBuilder::from_dsn("taos://localhost:6030")?;
 let conn1 = builder.build();
 
 //  use websocket protocol.
-let conn2 = TaosBuilder::from_dsn("taos+ws://localhost:6041")?;
+let builder2 = TaosBuilder::from_dsn("taos+ws://localhost:6041")?;
+let conn2 = builder2.build();
 ```
 
 After the connection is established, you can perform operations on your database.
@@ -228,41 +265,183 @@ There are two ways to query data: Using built-in types or the [serde](https://se
 
 ## Usage examples
 
-### Write data
+### Create database and tables
 
-#### SQL Write
+```rust
+use taos::*;
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    let dsn = "taos://localhost:6030";
+    let builder = TaosBuilder::from_dsn(dsn)?;
+
+    let taos = builder.build()?;
+
+    let db = "query";
+
+    // create database
+    taos.exec_many([
+        format!("DROP DATABASE IF EXISTS `{db}`"),
+        format!("CREATE DATABASE `{db}`"),
+        format!("USE `{db}`"),
+    ])
+    .await?;
+
+    // create table
+    taos.exec_many([
+        // create super table
+        "CREATE TABLE `meters` (`ts` TIMESTAMP, `current` FLOAT, `voltage` INT, `phase` FLOAT) \
+         TAGS (`groupid` INT, `location` BINARY(16))",
+        // create child table
+        "CREATE TABLE `d0` USING `meters` TAGS(0, 'Los Angles')",
+    ]).await?;
+}
+```
+
+### Insert data
 
 <RustInsert />
 
-#### STMT Write
-
-<RustBind />
-
-#### Schemaless Write
-
-<RustSml />
-
 ### Query data
 
 <RustQuery />
 
-## API Reference
+### execute SQL with req_id
 
-### Connector Constructor
+This req_id can be used to request link tracing.
-
-You create a connector constructor by using a DSN.
 
 ```rust
-let cfg = TaosBuilder::default().build()?;
+let rs = taos.query_with_req_id("select * from stable where tag1 is null", 1)?;
 ```
 
-You use the builder object to create multiple connections.
+### Writing data via parameter binding
+
+<RustBind />
+
+### Schemaless Writing
+
+<RustSml />
+
+### Schemaless with req_id
+
+This req_id can be used to request link tracing.
 
 ```rust
-let conn: Taos = cfg.build();
+let sml_data = SmlDataBuilder::default()
+    .protocol(SchemalessProtocol::Line)
+    .data(data)
+    .req_id(100u64)
+    .build()?;
+
+client.put(&sml_data)?
 ```
 
-### Connection pooling
+### Data Subscription
+
+TDengine starts subscriptions through [TMQ](../../../taos-sql/tmq/).
+
+#### Create a Topic
+
+```rust
+taos.exec_many([
+    // create topic for subscription
+    format!("CREATE TOPIC tmq_meters with META AS DATABASE {db}")
+])
+.await?;
+```
+
+#### Create a Consumer
+
+You create a TMQ connector by using a DSN.
+
+```rust
+let tmq = TmqBuilder::from_dsn("taos://localhost:6030/?group.id=test")?;
+```
+
+Create a consumer:
+
+```rust
+let mut consumer = tmq.build()?;
+```
+
+#### Subscribe to consume data
+
+A single consumer can subscribe to one or more topics.
+
+```rust
+consumer.subscribe(["tmq_meters"]).await?;
+```
+
+The TMQ is of [futures::Stream](https://docs.rs/futures/latest/futures/stream/index.html) type. You can use the corresponding API to consume each message in the queue and then use `.commit` to mark them as consumed.
+
+```rust
+{
+    let mut stream = consumer.stream();
+
+    while let Some((offset, message)) = stream.try_next().await? {
+        // get information from offset
+
+        // the topic
+        let topic = offset.topic();
+        // the vgroup id, like partition id in kafka.
+        let vgroup_id = offset.vgroup_id();
+        println!("* in vgroup id {vgroup_id} of topic {topic}\n");
+
+        if let Some(data) = message.into_data() {
+            while let Some(block) = data.fetch_raw_block().await? {
+                // one block for one table, get table name if needed
+                let name = block.table_name();
+                let records: Vec<Record> = block.deserialize().try_collect()?;
+                println!(
+                    "** table: {}, got {} records: {:#?}\n",
+                    name.unwrap(),
+                    records.len(),
+                    records
+                );
+            }
+        }
+        consumer.commit(offset).await?;
+    }
+}
+```
+
+Get assignments：
+
+Version requirements connector-rust >= v0.8.8, TDengine >= 3.0.5.0
+
+```rust
+let assignments = consumer.assignments().await.unwrap();
+```
+
+#### Assignment subscription Offset
+
+Seek offset：
+
+Version requirements connector-rust >= v0.8.8, TDengine >= 3.0.5.0
+
+```rust
+consumer.offset_seek(topic, vgroup_id, offset).await;
+```
+
+#### Close subscriptions
+
+```rust
+consumer.unsubscribe().await;
+```
+
+The following parameters can be configured for the TMQ DSN. Only `group.id` is mandatory.
+
+- `group.id`: Within a consumer group, load balancing is implemented by consuming messages on an at-least-once basis.
+- `client.id`: Subscriber client ID.
+- `auto.offset.reset`: Initial point of subscription. *earliest* subscribes from the beginning, and *latest* subscribes from the newest message. The default is earliest. Note: This parameter is set per consumer group.
+- `enable.auto.commit`: Automatically commits. This can be enabled when data consistency is not essential.
+- `auto.commit.interval.ms`: Interval for automatic commits.
+
+#### Full Sample Code
+  
+For more information, see [GitHub sample file](https://github.com/taosdata/TDengine/blob/3.0/docs/examples/rust/nativeexample/examples/subscribe_demo.rs).
+
+### Use with connection pool
 
 In complex applications, we recommend enabling connection pools. [taos] implements connection pools based on [r2d2].
 
@@ -292,7 +471,17 @@ In the application code, use `pool.get()? ` to get a connection object [Taos].
 let taos = pool.get()?;
 ```
 
-### Connectors
+### More sample programs
+
+The source code of the sample application is under `TDengine/examples/rust` :
+
+[rust example](https://github.com/taosdata/TDengine/tree/3.0/examples/rust)
+
+## Frequently Asked Questions
+
+For additional troubleshooting, see [FAQ](../../../train-faq/faq).
+
+## API Reference
 
 The [Taos][struct.Taos] object provides an API to perform operations on multiple databases.
 
@@ -380,7 +569,7 @@ Note that Rust asynchronous functions and an asynchronous runtime are required.
 
 In addition, this structure is also the entry point for [Parameter Binding](#Parameter Binding Interface) and [Line Protocol Interface](#Line Protocol Interface). Please refer to the specific API descriptions for usage.
 
-### Bind Interface
+Bind Interface
 
 Similar to the C interface, Rust provides the bind interface's wrapping. First, the [Taos][struct.taos] object creates a parameter binding object [Stmt] for an SQL statement.
 
@@ -391,7 +580,7 @@ stmt.prepare("INSERT INTO ? USING meters TAGS(?, ?) VALUES(?, ?, ?, ?)")?;
 
 The bind object provides a set of interfaces for implementing parameter binding.
 
-#### `.set_tbname(name)`
+`.set_tbname(name)`
 
 To bind table names.
 
@@ -400,7 +589,7 @@ let mut stmt = taos.stmt("insert into ? values(? ,?)")?;
 stmt.set_tbname("d0")?;
 ```
 
-#### `.set_tags(&[tag])`
+`.set_tags(&[tag])`
 
 Bind sub-table table names and tag values when the SQL statement uses a super table.
 
@@ -410,7 +599,7 @@ stmt.set_tbname("d0")?;
 stmt.set_tags(&[Value::VarChar("taos".to_string())])?;
 ```
 
-#### `.bind(&[column])`
+`.bind(&[column])`
 
 Bind value types. Use the [ColumnView] structure to create and bind the required types.
 
@@ -434,7 +623,7 @@ let params = vec![
 let rows = stmt.bind(&params)?.add_batch()?.execute()?;
 ```
 
-#### `.execute()`
+`.execute()`
 
 Execute SQL. [Stmt] objects can be reused, re-binded, and executed after execution. Before execution, ensure that all data has been added to the queue with `.add_batch`.
 
@@ -449,92 +638,6 @@ stmt.execute()?;
 
 For a working example, see [GitHub](https://github.com/taosdata/taos-connector-rust/blob/main/examples/bind.rs).
 
-### Subscriptions
-
-TDengine starts subscriptions through [TMQ](../../../taos-sql/tmq/).
-
-You create a TMQ connector by using a DSN.
-
-```rust
-let tmq = TmqBuilder::from_dsn("taos://localhost:6030/?group.id=test")?;
-```
-
-Create a consumer:
-
-```rust
-let mut consumer = tmq.build()?;
-```
-
-A single consumer can subscribe to one or more topics.
-
-```rust
-consumer.subscribe(["tmq_meters"]).await?;
-```
-
-The TMQ is of [futures::Stream](https://docs.rs/futures/latest/futures/stream/index.html) type. You can use the corresponding API to consume each message in the queue and then use `.commit` to mark them as consumed.
-
-```rust
-{
-    let mut stream = consumer.stream();
-
-    while let Some((offset, message)) = stream.try_next().await? {
-        // get information from offset
-
-        // the topic
-        let topic = offset.topic();
-        // the vgroup id, like partition id in kafka.
-        let vgroup_id = offset.vgroup_id();
-        println!("* in vgroup id {vgroup_id} of topic {topic}\n");
-
-        if let Some(data) = message.into_data() {
-            while let Some(block) = data.fetch_raw_block().await? {
-                // one block for one table, get table name if needed
-                let name = block.table_name();
-                let records: Vec<Record> = block.deserialize().try_collect()?;
-                println!(
-                    "** table: {}, got {} records: {:#?}\n",
-                    name.unwrap(),
-                    records.len(),
-                    records
-                );
-            }
-        }
-        consumer.commit(offset).await?;
-    }
-}
-```
-
-Get assignments：
-
-Version requirements connector-rust >= v0.8.8, TDengine >= 3.0.5.0
-
-```rust
-let assignments = consumer.assignments().await.unwrap();
-```
-
-Seek offset：
-
-Version requirements connector-rust >= v0.8.8, TDengine >= 3.0.5.0
-
-```rust
-consumer.offset_seek(topic, vgroup_id, offset).await;
-```
-
-Unsubscribe:
-
-```rust
-consumer.unsubscribe().await;
-```
-
-The following parameters can be configured for the TMQ DSN. Only `group.id` is mandatory.
-
-- `group.id`: Within a consumer group, load balancing is implemented by consuming messages on an at-least-once basis.
-- `client.id`: Subscriber client ID.
-- `auto.offset.reset`: Initial point of subscription. *earliest* subscribes from the beginning, and *latest* subscribes from the newest message. The default is earliest. Note: This parameter is set per consumer group.
-- `enable.auto.commit`: Automatically commits. This can be enabled when data consistency is not essential.
-- `auto.commit.interval.ms`: Interval for automatic commits.
-  
-For more information, see [GitHub sample file](https://github.com/taosdata/TDengine/blob/3.0/docs/examples/rust/nativeexample/examples/subscribe_demo.rs).
 
 For information about other structure APIs, see the [Rust documentation](https://docs.rs/taos).
 

docs/zh/08-connector/26-rust.mdx

@@ -30,21 +30,57 @@ Websocket 连接支持所有能运行 Rust 的平台。
 
 |   Rust 连接器版本   |   TDengine 版本   |                        主要功能                       |
 | :----------------: | :--------------: | :--------------------------------------------------: |
-|       v0.8.10       |      3.0.5.0 or later    | 消息订阅：获取消费进度及按照指定进度开始消费。 |
+|       v0.8.12       |      3.0.5.0 or later    | 消息订阅：获取消费进度及按照指定进度开始消费。 |
 |       v0.8.0       |      3.0.4.0     | 支持无模式写入。 |
 |       v0.7.6       |      3.0.3.0     | 支持在请求中使用 req_id。 |
 |       v0.6.0       |      3.0.0.0     | 基础功能。 |
 
 Rust 连接器仍然在快速开发中，1.0 之前无法保证其向后兼容。建议使用 3.0 版本以上的 TDengine，以避免已知问题。
 
-## 安装
+## 处理错误
+
+在报错后，可以获取到错误的具体信息：
+
+```rust
+match conn.exec(sql) {
+    Ok(_) => {
+        Ok(())
+    }
+    Err(e) => {
+        eprintln!("ERROR: {:?}", e);
+        Err(e)
+    }
+}
+```
+
+## TDengine DataType 和 Rust DataType
+
+TDengine 目前支持时间戳、数字、字符、布尔类型，与 Rust 对应类型转换如下：
+
+| TDengine DataType | Rust DataType     |
+| ----------------- | ----------------- |
+| TIMESTAMP         | Timestamp         |
+| INT               | i32               |
+| BIGINT            | i64               |
+| FLOAT             | f32               |
+| DOUBLE            | f64               |
+| SMALLINT          | i16               |
+| TINYINT           | i8                |
+| BOOL              | bool              |
+| BINARY            | Vec<u8\>          |
+| NCHAR             | String            |
+| JSON              | serde_json::Value |
+
+**注意**：JSON 类型仅在 tag 中支持。
+
+## 安装步骤
 
 ### 安装前准备
 
 * 安装 Rust 开发工具链
 * 如果使用原生连接，请安装 TDengine 客户端驱动，具体步骤请参考[安装客户端驱动](../#安装客户端驱动)
 
-### 添加 taos 依赖
+### 安装连接器
 
 根据选择的连接方式，按照如下说明在 [Rust](https://rust-lang.org) 项目中添加 [taos][taos] 依赖：
 
@@ -151,7 +187,8 @@ let builder = TaosBuilder::from_dsn("taos://localhost:6030")?;
 let conn1 = builder.build();
 
 //  use websocket protocol.
-let conn2 = TaosBuilder::from_dsn("taos+ws://localhost:6041")?;
+let builder2 = TaosBuilder::from_dsn("taos+ws://localhost:6041")?;
+let conn2 = builder2.build();
 ```
 
 建立连接后，您可以进行相关数据库操作：
@@ -233,41 +270,183 @@ async fn demo(taos: &Taos, db: &str) -> Result<(), Error> {
 
 ## 使用示例
 
-### 写入数据
+### 创建数据库和表
 
-#### SQL 写入
+```rust
+use taos::*;
+
+#[tokio::main]
+async fn main() -> anyhow::Result<()> {
+    let dsn = "taos://localhost:6030";
+    let builder = TaosBuilder::from_dsn(dsn)?;
+
+    let taos = builder.build()?;
+
+    let db = "query";
+
+    // create database
+    taos.exec_many([
+        format!("DROP DATABASE IF EXISTS `{db}`"),
+        format!("CREATE DATABASE `{db}`"),
+        format!("USE `{db}`"),
+    ])
+    .await?;
+
+    // create table
+    taos.exec_many([
+        // create super table
+        "CREATE TABLE `meters` (`ts` TIMESTAMP, `current` FLOAT, `voltage` INT, `phase` FLOAT) \
+         TAGS (`groupid` INT, `location` BINARY(16))",
+        // create child table
+        "CREATE TABLE `d0` USING `meters` TAGS(0, 'Los Angles')",
+    ]).await?;
+}
+```
+
+### 插入数据
 
 <RustInsert />
 
-#### STMT 写入
-
-<RustBind />
-
-#### Schemaless 写入
-
-<RustSml />
-
 ### 查询数据
 
 <RustQuery />
 
-## API 参考
+### 执行带有 req_id 的 SQL
 
-### 连接构造器
+此 req_id 可用于请求链路追踪。
-
-通过 DSN 来构建一个连接器构造器。
 
 ```rust
-let cfg = TaosBuilder::default().build()?;
+let rs = taos.query_with_req_id("select * from stable where tag1 is null", 1)?;
 ```
 
-使用 `builder` 对象创建多个连接：
+### 通过参数绑定写入数据
+
+<RustBind />
+
+### 无模式写入
+
+<RustSml />
+
+### 执行带有 req_id 的无模式写入
+
+此 req_id 可用于请求链路追踪。
 
 ```rust
-let conn: Taos = cfg.build();
+let sml_data = SmlDataBuilder::default()
+    .protocol(SchemalessProtocol::Line)
+    .data(data)
+    .req_id(100u64)
+    .build()?;
+
+client.put(&sml_data)?
 ```
 
-### 连接池
+### 数据订阅
+
+TDengine 通过消息队列 [TMQ](../../../taos-sql/tmq/) 启动一个订阅。
+
+#### 创建 Topic
+
+```rust
+taos.exec_many([
+    // create topic for subscription
+    format!("CREATE TOPIC tmq_meters with META AS DATABASE {db}")
+])
+.await?;
+```
+
+#### 创建 Consumer
+
+从 DSN 开始，构建一个 TMQ 连接器。
+
+```rust
+let tmq = TmqBuilder::from_dsn("taos://localhost:6030/?group.id=test")?;
+```
+
+创建消费者：
+
+```rust
+let mut consumer = tmq.build()?;
+```
+
+#### 订阅消费数据
+
+消费者可订阅一个或多个 `TOPIC`。
+
+```rust
+consumer.subscribe(["tmq_meters"]).await?;
+```
+
+TMQ 消息队列是一个 [futures::Stream](https://docs.rs/futures/latest/futures/stream/index.html) 类型，可以使用相应 API 对每个消息进行消费，并通过 `.commit` 进行已消费标记。
+
+```rust
+{
+    let mut stream = consumer.stream();
+
+    while let Some((offset, message)) = stream.try_next().await? {
+        // get information from offset
+
+        // the topic
+        let topic = offset.topic();
+        // the vgroup id, like partition id in kafka.
+        let vgroup_id = offset.vgroup_id();
+        println!("* in vgroup id {vgroup_id} of topic {topic}\n");
+
+        if let Some(data) = message.into_data() {
+            while let Some(block) = data.fetch_raw_block().await? {
+                // one block for one table, get table name if needed
+                let name = block.table_name();
+                let records: Vec<Record> = block.deserialize().try_collect()?;
+                println!(
+                    "** table: {}, got {} records: {:#?}\n",
+                    name.unwrap(),
+                    records.len(),
+                    records
+                );
+            }
+        }
+        consumer.commit(offset).await?;
+    }
+}
+```
+
+获取消费进度：
+
+版本要求 connector-rust >= v0.8.8， TDengine >= 3.0.5.0
+
+```rust
+let assignments = consumer.assignments().await.unwrap();
+```
+
+#### 指定订阅 Offset
+
+按照指定的进度消费：
+
+版本要求 connector-rust >= v0.8.8， TDengine >= 3.0.5.0
+
+```rust
+consumer.offset_seek(topic, vgroup_id, offset).await;
+```
+
+#### 关闭订阅
+
+```rust
+consumer.unsubscribe().await;
+```
+
+对于 TMQ DSN, 有以下配置项可以进行设置，需要注意的是，`group.id` 是必须的。
+
+- `group.id`: 同一个消费者组，将以至少消费一次的方式进行消息负载均衡。
+- `client.id`: 可选的订阅客户端识别项。
+- `auto.offset.reset`: 可选初始化订阅起点， *earliest* 为从头开始订阅， *latest* 为仅从最新数据开始订阅，默认为从头订阅。注意，此选项在同一个 `group.id` 中仅生效一次。
+- `enable.auto.commit`: 当设置为 `true` 时，将启用自动标记模式，当对数据一致性不敏感时，可以启用此方式。
+- `auto.commit.interval.ms`: 自动标记的时间间隔。
+
+#### 完整示例
+
+完整订阅示例参见 [GitHub 示例文件](https://github.com/taosdata/TDengine/blob/3.0/docs/examples/rust/nativeexample/examples/subscribe_demo.rs).
+
+### 与连接池使用
 
 在复杂应用中，建议启用连接池。[taos] 的连接池默认（异步模式）使用 [deadpool] 实现。
 
@@ -295,7 +474,17 @@ let pool: Pool<TaosBuilder> = Pool::builder(Manager::from_dsn(self.dsn.clone()).
 let taos = pool.get()?;
 ```
 
-### 连接
+### 更多示例程序
+
+示例程序源码位于 `TDengine/examples/rust` 下:
+
+请参考：[rust example](https://github.com/taosdata/TDengine/tree/3.0/examples/rust)
+
+## 常见问题
+
+请参考 [FAQ](../../../train-faq/faq)
+
+## API 参考
 
 [Taos][struct.Taos] 对象提供了多个数据库操作的 API：
 
@@ -383,7 +572,7 @@ let taos = pool.get()?;
 
 除此之外，该结构也是 [参数绑定](#参数绑定接口) 和 [行协议接口](#行协议接口) 的入口，使用方法请参考具体的 API 说明。
 
-### 参数绑定接口
+参数绑定接口
 
 与 C 接口类似，Rust 提供参数绑定接口。首先，通过 [Taos][struct.Taos] 对象创建一个 SQL 语句的参数绑定对象 [Stmt]：
 
@@ -394,7 +583,7 @@ stmt.prepare("INSERT INTO ? USING meters TAGS(?, ?) VALUES(?, ?, ?, ?)")?;
 
 参数绑定对象提供了一组接口用于实现参数绑定：
 
-#### `.set_tbname(name)`
+`.set_tbname(name)`
 
 用于绑定表名。
 
@@ -403,7 +592,7 @@ let mut stmt = taos.stmt("insert into ? values(? ,?)")?;
 stmt.set_tbname("d0")?;
 ```
 
-#### `.set_tags(&[tag])`
+`.set_tags(&[tag])`
 
 当 SQL 语句使用超级表时，用于绑定子表表名和标签值：
 
@@ -413,7 +602,7 @@ stmt.set_tbname("d0")?;
 stmt.set_tags(&[Value::VarChar("涛思".to_string())])?;
 ```
 
-#### `.bind(&[column])`
+`.bind(&[column])`
 
 用于绑定值类型。使用 [ColumnView] 结构体构建需要的类型并绑定：
 
@@ -437,7 +626,7 @@ let params = vec![
 let rows = stmt.bind(&params)?.add_batch()?.execute()?;
 ```
 
-#### `.execute()`
+`.execute()`
 
 执行 SQL。[Stmt] 对象可以复用，在执行后可以重新绑定并执行。执行前请确保所有数据已通过 `.add_batch` 加入到执行队列中。
 
@@ -452,92 +641,6 @@ stmt.execute()?;
 
 一个可运行的示例请见 [GitHub 上的示例](https://github.com/taosdata/taos-connector-rust/blob/main/examples/bind.rs)。
 
-### 订阅
-
-TDengine 通过消息队列 [TMQ](../../../taos-sql/tmq/) 启动一个订阅。
-
-从 DSN 开始，构建一个 TMQ 连接器。
-
-```rust
-let tmq = TmqBuilder::from_dsn("taos://localhost:6030/?group.id=test")?;
-```
-
-创建消费者：
-
-```rust
-let mut consumer = tmq.build()?;
-```
-
-消费者可订阅一个或多个 `TOPIC`。
-
-```rust
-consumer.subscribe(["tmq_meters"]).await?;
-```
-
-TMQ 消息队列是一个 [futures::Stream](https://docs.rs/futures/latest/futures/stream/index.html) 类型，可以使用相应 API 对每个消息进行消费，并通过 `.commit` 进行已消费标记。
-
-```rust
-{
-    let mut stream = consumer.stream();
-
-    while let Some((offset, message)) = stream.try_next().await? {
-        // get information from offset
-
-        // the topic
-        let topic = offset.topic();
-        // the vgroup id, like partition id in kafka.
-        let vgroup_id = offset.vgroup_id();
-        println!("* in vgroup id {vgroup_id} of topic {topic}\n");
-
-        if let Some(data) = message.into_data() {
-            while let Some(block) = data.fetch_raw_block().await? {
-                // one block for one table, get table name if needed
-                let name = block.table_name();
-                let records: Vec<Record> = block.deserialize().try_collect()?;
-                println!(
-                    "** table: {}, got {} records: {:#?}\n",
-                    name.unwrap(),
-                    records.len(),
-                    records
-                );
-            }
-        }
-        consumer.commit(offset).await?;
-    }
-}
-```
-
-获取消费进度：
-
-版本要求 connector-rust >= v0.8.8， TDengine >= 3.0.5.0
-
-```rust
-let assignments = consumer.assignments().await.unwrap();
-```
-
-按照指定的进度消费：
-
-版本要求 connector-rust >= v0.8.8， TDengine >= 3.0.5.0
-
-```rust
-consumer.offset_seek(topic, vgroup_id, offset).await;
-```
-
-停止订阅：
-
-```rust
-consumer.unsubscribe().await;
-```
-
-对于 TMQ DSN, 有以下配置项可以进行设置，需要注意的是，`group.id` 是必须的。
-
-- `group.id`: 同一个消费者组，将以至少消费一次的方式进行消息负载均衡。
-- `client.id`: 可选的订阅客户端识别项。
-- `auto.offset.reset`: 可选初始化订阅起点， *earliest* 为从头开始订阅， *latest* 为仅从最新数据开始订阅，默认为从头订阅。注意，此选项在同一个 `group.id` 中仅生效一次。
-- `enable.auto.commit`: 当设置为 `true` 时，将启用自动标记模式，当对数据一致性不敏感时，可以启用此方式。
-- `auto.commit.interval.ms`: 自动标记的时间间隔。
-  
-完整订阅示例参见 [GitHub 示例文件](https://github.com/taosdata/TDengine/blob/3.0/docs/examples/rust/nativeexample/examples/subscribe_demo.rs).
 
 其他相关结构体 API 使用说明请移步 Rust 文档托管网页：<https://docs.rs/taos>。