Merge pull request #28575 from taosdata/docs/TS-4883-main-1

docs: modify the taosBenchmark documentation for the float min problem

docs/en/14-reference/01-components/10-taosbenchmark

@@ -364,6 +364,9 @@ The configuration parameters for specifying super table tag columns and data col
 - **min**: The minimum value of the column/label of the data type. The generated value will equal or large than the minimum value.
 
 - **max**: The maximum value of the column/label of the data type. The generated value will less than the maximum value.
+
+- **scalingFactor**: Floating-point precision enhancement factor, which takes effect only when the data type is float/double. It has a valid range of positive integers from 1 to 1,000,000. It is used to enhance the precision of generated floating-point numbers, particularly when the min or max values are small. This property enhances the precision after the decimal point by powers of 10: scalingFactor of 10 indicates an enhancement of 1 decimal precision, 100 indicates an enhancement of 2 decimal precision, and so on.
+
 - **fun**: This column of data is filled with functions. Currently, only the sin and cos functions are supported. The input parameter is the timestamp and converted to an angle value. The conversion formula is: angle x=input time column ts value % 360. At the same time, it supports coefficient adjustment and random fluctuation factor adjustment, presented in a fixed format expression, such as fun="10\*sin(x)+100\*random(5)", where x represents the angle, ranging from 0 to 360 degrees, and the growth step size is consistent with the time column step size. 10 represents the coefficient of multiplication, 100 represents the coefficient of addition or subtraction, and 5 represents the fluctuation range within a random range of 5%. The currently supported data types are int, bigint, float, and double. Note: The expression is fixed and cannot be reversed.
 
 - **values**: The value field of the nchar/binary column/label, which will be chosen randomly from the values.

docs/zh/14-reference/02-tools/10-taosbenchmark.md

@@ -364,6 +364,8 @@ taosBenchmark -A INT,DOUBLE,NCHAR,BINARY\(16\)
 
 - **max** : 数据类型的 列/标签 的最大值。生成的值将小于最小值。
 
+- **scalingFactor** : 浮点数精度增强因子，仅当数据类型是 float/double 时生效，有效值范围为 1 至 1000000 的正整数。用于增强生成浮点数的精度，特别是在 min 或 max 值较小的情况下。此属性按 10 的幂次增强小数点后的精度：scalingFactor 为 10 表示增强 1 位小数精度，100 表示增强 2 位，依此类推。
+
 - **fun** : 此列数据以函数填充，目前只支持 sin 和 cos 两函数，输入参数为时间戳换算成角度值，换算公式： 角度 x = 输入的时间列ts值 % 360。同时支持系数调节，随机波动因子调节，以固定格式的表达式展现，如 fun=“10\*sin(x)+100\*random(5)” , x 表示角度，取值 0 ~ 360度，增长步长与时间列步长一致。10 表示乘的系数，100 表示加或减的系数，5 表示波动幅度在 5% 的随机范围内。目前支持的数据类型为 int, bigint, float, double 四种数据类型。注意：表达式为固定模式，不可前后颠倒。
 
 - **values** : nchar/binary 列/标签的值域，将从值中随机选择。