docs: remove desc of rsma
This commit is contained in:
kailixu
parent
48af3a9559
commit
3ce2a2157a
|
|
@ -26,7 +26,6 @@ database_option: {
|
|||
| PAGESIZE value
|
||||
| PRECISION {'ms' | 'us' | 'ns'}
|
||||
| REPLICA value
|
||||
| RETENTIONS ingestion_duration:keep_duration ...
|
||||
| WAL_LEVEL {1 | 2}
|
||||
| VGROUPS value
|
||||
| SINGLE_STABLE {0 | 1}
|
||||
|
|
@ -61,7 +60,6 @@ database_option: {
|
|||
- PAGESIZE: specifies the size (in KB) of each page in the metadata storage engine cache on each vnode. The default value is 4. Enter a value between 1 and 16384.
|
||||
- PRECISION: specifies the precision at which a database records timestamps. Enter ms for milliseconds, us for microseconds, or ns for nanoseconds. The default value is ms.
|
||||
- REPLICA: specifies the number of replicas that are made of the database. Enter 1 or 3. The default value is 1. The value of the REPLICA parameter cannot exceed the number of dnodes in the cluster.
|
||||
- RETENTIONS: specifies the retention period for data aggregated at various intervals. For example, RETENTIONS 15s:7d,1m:21d,15m:50d indicates that data aggregated every 15 seconds is retained for 7 days, data aggregated every 1 minute is retained for 21 days, and data aggregated every 15 minutes is retained for 50 days. You must enter three aggregation intervals and corresponding retention periods.
|
||||
- WAL_LEVEL: specifies whether fsync is enabled. The default value is 1.
|
||||
- 1: WAL is enabled but fsync is disabled.
|
||||
- 2: WAL and fsync are both enabled.
|
||||
|
|
|
|||
|
|
@ -54,11 +54,8 @@ table_option: {
|
|||
|
||||
**Parameter description**
|
||||
1. COMMENT: specifies comments for the table. This parameter can be used with supertables, standard tables, and subtables.
|
||||
2. WATERMARK: specifies the time after which the window is closed. The default value is 5 seconds. Enter a value between 0 and 15 minutes in milliseconds, seconds, or minutes. You can enter multiple values separated by commas (,). This parameter applies only to supertables and takes effect only when the RETENTIONS parameter has been specified for the database.
|
||||
3. MAX_DELAY: specifies the maximum latency for pushing computation results. The default value is 15 minutes or the value of the INTERVAL parameter, whichever is smaller. Enter a value between 0 and 15 minutes in milliseconds, seconds, or minutes. You can enter multiple values separated by commas (,). Note: Retain the default value if possible. Configuring a small MAX_DELAY may cause results to be frequently pushed, affecting storage and query performance. This parameter applies only to supertables and takes effect only when the RETENTIONS parameter has been specified for the database.
|
||||
4. ROLLUP: specifies aggregate functions to roll up. Rolling up a function provides downsampled results based on multiple axes. This parameter applies only to supertables and takes effect only when the RETENTIONS parameter has been specified for the database. You can specify only one function to roll up. The rollup takes effect on all columns except TS. Enter one of the following values: avg, sum, min, max, last, or first.
|
||||
5. SMA: specifies functions on which to enable small materialized aggregates (SMA). SMA is user-defined precomputation of aggregates based on data blocks. Enter one of the following values: max, min, or sum This parameter can be used with supertables and standard tables.
|
||||
6. TTL: specifies the time to live (TTL) for the table. If TTL is specified when creatinga table, after the time period for which the table has been existing is over TTL, TDengine will automatically delete the table. Please be noted that the system may not delete the table at the exact moment that the TTL expires but guarantee there is such a system and finally the table will be deleted. The unit of TTL is in days. The default value is 0, i.e. never expire.
|
||||
2. SMA: specifies functions on which to enable small materialized aggregates (SMA). SMA is user-defined precomputation of aggregates based on data blocks. Enter one of the following values: max, min, or sum This parameter can be used with supertables and standard tables.
|
||||
3. TTL: specifies the time to live (TTL) for the table. If TTL is specified when creatinga table, after the time period for which the table has been existing is over TTL, TDengine will automatically delete the table. Please be noted that the system may not delete the table at the exact moment that the TTL expires but guarantee there is such a system and finally the table will be deleted. The unit of TTL is in days. The default value is 0, i.e. never expire.
|
||||
|
||||
## Create Subtables
|
||||
|
||||
|
|
|
|||
|
|
@ -26,7 +26,6 @@ database_option: {
|
|||
| PAGESIZE value
|
||||
| PRECISION {'ms' | 'us' | 'ns'}
|
||||
| REPLICA value
|
||||
| RETENTIONS ingestion_duration:keep_duration ...
|
||||
| WAL_LEVEL {1 | 2}
|
||||
| VGROUPS value
|
||||
| SINGLE_STABLE {0 | 1}
|
||||
|
|
@ -61,7 +60,6 @@ database_option: {
|
|||
- PAGESIZE：一个 VNODE 中元数据存储引擎的页大小，单位为 KB，默认为 4 KB。范围为 1 到 16384，即 1 KB 到 16 MB。
|
||||
- PRECISION：数据库的时间戳精度。ms 表示毫秒，us 表示微秒，ns 表示纳秒，默认 ms 毫秒。
|
||||
- REPLICA：表示数据库副本数，取值为 1 或 3，默认为 1。在集群中使用，副本数必须小于或等于 DNODE 的数目。
|
||||
- RETENTIONS：表示数据的聚合周期和保存时长，如 RETENTIONS 15s:7d,1m:21d,15m:50d 表示数据原始采集周期为 15 秒，原始数据保存 7 天；按 1 分钟聚合的数据保存 21 天；按 15 分钟聚合的数据保存 50 天。目前支持且只支持三级存储周期。
|
||||
- WAL_LEVEL：WAL 级别，默认为 1。
|
||||
- 1：写 WAL，但不执行 fsync。
|
||||
- 2：写 WAL，而且执行 fsync。
|
||||
|
|
|
|||
|
|
@ -52,11 +52,8 @@ table_option: {
|
|||
**参数说明**
|
||||
|
||||
1. COMMENT：表注释。可用于超级表、子表和普通表。
|
||||
2. WATERMARK：指定窗口的关闭时间，默认值为 5 秒，最小单位毫秒，范围为 0 到 15 分钟，多个以逗号分隔。只可用于超级表，且只有当数据库使用了 RETENTIONS 参数时，才可以使用此表参数。
|
||||
3. MAX_DELAY：用于控制推送计算结果的最大延迟，默认值为 interval 的值(但不能超过最大值)，最小单位毫秒，范围为 1 毫秒到 15 分钟，多个以逗号分隔。注：不建议 MAX_DELAY 设置太小，否则会过于频繁的推送结果，影响存储和查询性能，如无特殊需求，取默认值即可。只可用于超级表，且只有当数据库使用了 RETENTIONS 参数时，才可以使用此表参数。
|
||||
4. ROLLUP：Rollup 指定的聚合函数，提供基于多层级的降采样聚合结果。只可用于超级表。只有当数据库使用了 RETENTIONS 参数时，才可以使用此表参数。作用于超级表除 TS 列外的其它所有列，但是只能定义一个聚合函数。 聚合函数支持 avg, sum, min, max, last, first。
|
||||
5. SMA：Small Materialized Aggregates，提供基于数据块的自定义预计算功能。预计算类型包括 MAX、MIN 和 SUM。可用于超级表/普通表。
|
||||
6. TTL：Time to Live，是用户用来指定表的生命周期的参数。如果创建表时指定了这个参数，当该表的存在时间超过 TTL 指定的时间后，TDengine 自动删除该表。这个 TTL 的时间只是一个大概时间，系统不保证到了时间一定会将其删除，而只保证存在这样一个机制且最终一定会删除。TTL 单位是天，默认为 0，表示不限制，到期时间为表创建时间加上 TTL 时间。TTL 与数据库 KEEP 参数没有关联，如果 KEEP 比 TTL 小，在表被删除之前数据也可能已经被删除。
|
||||
2. SMA：Small Materialized Aggregates，提供基于数据块的自定义预计算功能。预计算类型包括 MAX、MIN 和 SUM。可用于超级表/普通表。
|
||||
3. TTL：Time to Live，是用户用来指定表的生命周期的参数。如果创建表时指定了这个参数，当该表的存在时间超过 TTL 指定的时间后，TDengine 自动删除该表。这个 TTL 的时间只是一个大概时间，系统不保证到了时间一定会将其删除，而只保证存在这样一个机制且最终一定会删除。TTL 单位是天，默认为 0，表示不限制，到期时间为表创建时间加上 TTL 时间。TTL 与数据库 KEEP 参数没有关联，如果 KEEP 比 TTL 小，在表被删除之前数据也可能已经被删除。
|
||||
|
||||
## 创建子表
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue