diff --git a/docs/doc/appdev/debug/JLink-KD233.md b/docs/doc/appdev/debug/JLink-KD233.md index 6f6d59f..585a9a2 100644 --- a/docs/doc/appdev/debug/JLink-KD233.md +++ b/docs/doc/appdev/debug/JLink-KD233.md @@ -16,7 +16,7 @@ ## 步骤一 1.下载JLink驱动（Ubuntu下载DEB包） -下载地址：[SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace](https://www.segger.com/downloads/jlink),[推荐下载地址 http://101.36.126.201:8011/JLink_Linux_V720_x86_64.deb](http://101.36.126.201:8011/JLink_Linux_V720_x86_64.deb) +下载地址：[SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace](https://www.segger.com/downloads/jlink),[推荐下载地址 http://xuos.io/downloads/JLink_Linux_V720_x86_64.deb](http://xuos.io/downloads/JLink_Linux_V720_x86_64.deb) ![img](https://img-blog.csdnimg.cn/20210427214025688.png) @@ -45,7 +45,7 @@ J-Link> ## 步骤二 1.安装openocd（下载Ubuntu版本64位） -下载地址：[Releases · kendryte/openocd-kendryte (github.com)](https://github.com/kendryte/openocd-kendryte/releases),推荐下载地址为：[http://101.36.126.201:8011/kendryte-openocd-0.2.3-ubuntu64.tar.gz](http://101.36.126.201:8011/kendryte-openocd-0.2.3-ubuntu64.tar.gz) +下载地址：[Releases · kendryte/openocd-kendryte (github.com)](https://github.com/kendryte/openocd-kendryte/releases),推荐下载地址为：[http://xuos.io/downloads/kendryte-openocd-0.2.3-ubuntu64.tar.gz](http://xuos.io/downloads/kendryte-openocd-0.2.3-ubuntu64.tar.gz) ![img](https://img-blog.csdnimg.cn/20210427214045491.png) diff --git a/docs/doc/appdev/debug/Qzone-stm32f407-st-discovery.md b/docs/doc/appdev/debug/Qzone-stm32f407-st-discovery.md index fc570f7..27439ca 100644 --- a/docs/doc/appdev/debug/Qzone-stm32f407-st-discovery.md +++ b/docs/doc/appdev/debug/Qzone-stm32f407-st-discovery.md @@ -34,7 +34,7 @@ Ozone是SEGGER公司开发的用于配合J-Link使用的调试工具，可以在 ### 步骤一 (Windows环境下) 切换板载STLink芯片固件至JLink固件: -下载安装stlink驱动及烧录软件：[STM32 ST-LINK Utility v3.9.0](http://101.36.126.201:8011/STM32%20ST-LINK%20Utility%20v3.9.0.exe)。链接：`http://101.36.126.201:8011/STM32%20ST-LINK%20Utility%20v3.9.0.exe` +下载安装stlink驱动及烧录软件：[STM32_ST-LINK_Utility_v3.9.0](http://xuos.io/downloads/STM32_ST-LINK_Utility_v3.9.0.exe)。链接：`http://xuos.io/downloads/STM32_ST-LINK_Utility_v3.9.0.exe` 将开发板连接至计算机
diff --git a/docs/doc/appdev/start_from_scratch/HiFive1-Rev-B.md b/docs/doc/appdev/start_from_scratch/HiFive1-Rev-B.md index f0913bf..1c94981 100644 --- a/docs/doc/appdev/start_from_scratch/HiFive1-Rev-B.md +++ b/docs/doc/appdev/start_from_scratch/HiFive1-Rev-B.md @@ -58,7 +58,7 @@ cd kconfig-frontends ### 编译工具链 -RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2](http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2) +RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2](http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2) ```bash tar -xjf gnu-mcu-eclipse.tar.bz2 -C /opt/ @@ -129,7 +129,7 @@ hifive1-rev-B支持J-Link，可以通过J-Link进行烧录和调试。

-首先电脑需要安装J-Link Software and Documentation Pack，这里以Ubuntu18.04为例，下载 [JLink_Linux_V700_x86_64.deb](https://www.segger.com/downloads/jlink/JLink_Linux_V700_x86_64.deb)，推荐使用[http://101.36.126.201:8011/JLink_Linux_V700_x86_64.deb](http://101.36.126.201:8011/JLink_Linux_V700_x86_64.deb)下载，然后执行以下命令安装到电脑上 +首先电脑需要安装J-Link Software and Documentation Pack，这里以Ubuntu18.04为例，下载 [JLink_Linux_V700_x86_64.deb](https://www.segger.com/downloads/jlink/JLink_Linux_V700_x86_64.deb)，推荐使用[http://xuos.io/downloads/JLink_Linux_V700_x86_64.deb](http://xuos.io/downloads/JLink_Linux_V700_x86_64.deb)下载，然后执行以下命令安装到电脑上 ```bash sudo apt install ./JLink_Linux_V700_x86_64.deb diff --git a/docs/doc/appdev/start_from_scratch/hifive1-emulator.md b/docs/doc/appdev/start_from_scratch/hifive1-emulator.md index 7b41dc9..928cf4b 100644 --- a/docs/doc/appdev/start_from_scratch/hifive1-emulator.md +++ b/docs/doc/appdev/start_from_scratch/hifive1-emulator.md @@ -68,7 +68,7 @@ cd kconfig-frontends ### 编译工具链 -RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2](http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2)，下载完成后，执行以下命令： +RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2](http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2)，下载完成后，执行以下命令： ```bash sudo tar -xvjf gnu-mcu-eclipse.tar.bz2 -C /opt/ diff --git a/docs/doc/appdev/start_from_scratch/kd233.md b/docs/doc/appdev/start_from_scratch/kd233.md index 70bfe4a..504a349 100644 --- a/docs/doc/appdev/start_from_scratch/kd233.md +++ b/docs/doc/appdev/start_from_scratch/kd233.md @@ -64,7 +64,7 @@ cd kconfig-frontends ### 编译工具链： -RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2](http://101.36.126.201:8011/gnu-mcu-eclipse.tar.bz2) +RISC-V: riscv-none-embed-，默认安装到Ubuntu的/opt/，下载源码并解压。[下载网址 http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2](http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2) ```shell $ tar -xjf gnu-mcu-eclipse.tar.bz2 -C /opt/ diff --git a/docs/doc/appdev/start_from_scratch/stm32f407-st-discovery.md b/docs/doc/appdev/start_from_scratch/stm32f407-st-discovery.md index cd0a4c3..5d015c1 100644 --- a/docs/doc/appdev/start_from_scratch/stm32f407-st-discovery.md +++ b/docs/doc/appdev/start_from_scratch/stm32f407-st-discovery.md @@ -177,7 +177,7 @@ make BOARD=stm32f407-st-discovery ARM：ST-LINK（ST-LINK V2实物如图，可在购物网站搜索关键字购买） ![在这里插入图片描述](https://img-blog.csdnimg.cn/20210427144736126.png) -下载并以下执行命令以下命令安装st-link工具(本文使用v1.5.1版本)，下载地址为：[http://101.36.126.201:8011/stlink.zip](http://101.36.126.201:8011/stlink.zip) +下载并以下执行命令以下命令安装st-link工具(本文使用v1.5.1版本)，下载地址为：[http://xuos.io/downloads/stlink-1.5.1.zip](http://xuos.io/downloads/stlink-1.5.1.zip) ```bash sudo apt install libusb-dev diff --git a/docs/resource/download.md b/docs/resource/download.md index e99e74e..fb31e63 100644 --- a/docs/resource/download.md +++ b/docs/resource/download.md @@ -1 +1,12 @@ # 下载 + +### Windows + +- stlink驱动及烧录软件 [STM32_ST-LINK_Utility_v3.9.0.exe](http://xuos.io/downloads/STM32_ST-LINK_Utility_v3.9.0.exe) 链接：`http://xuos.io/downloads/STM32_ST-LINK_Utility_v3.9.0.exe` + +### Linux(Ubuntu) + +- RISC-V编译工具链 [gnu-mcu-eclipse.tar.bz2](http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2) 链接：`http://xuos.io/downloads/gnu-mcu-eclipse.tar.bz2` +- openocd [kendryte-openocd-0.2.3-ubuntu64.tar.gz](http://xuos.io/downloads/kendryte-openocd-0.2.3-ubuntu64.tar.gz) 链接：`http://xuos.io/downloads/kendryte-openocd-0.2.3-ubuntu64.tar.gz` +- JLink驱动 [JLink_Linux_V720_x86_64.deb](http://xuos.io/downloads/JLink_Linux_V720_x86_64.deb) 链接：`http://xuos.io/downloads/JLink_Linux_V720_x86_64.deb` +- ARM烧写工具 [stlink-1.5.1.zip](http://xuos.io/downloads/stlink-1.5.1.zip) 链接：`http://xuos.io/downloads/stlink-1.5.1.zip`