xuos/xiuos
2
0
Fork 11
Code Issues Pull Requests 3 Actions Packages Projects Releases Wiki Activity
Files
f6cf46027d414374f61703df8cf420c28cb4a9fc
xiuos/Ubiquitous/XiZi_AIoT/services/boards/imx6q-sabrelite/include/registers/regsusbanalog.h
T
Wang_Weigen 60e1c1bf8f add part of bsp for sabre lite board
2023-04-07 16:23:09 +08:00

1387 lines
69 KiB
C
Raw Blame History

/*
* Copyright (c) 2012, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_USB_ANALOG_REGISTERS_H__
#define __HW_USB_ANALOG_REGISTERS_H__
#include "regs.h"
/*
* i.MX6DQ USB_ANALOG
*
* USB Analog
*
* Registers defined in this header file:
* - HW_USB_ANALOG_USB1_VBUS_DETECT - USB VBUS Detect Register
* - HW_USB_ANALOG_USB1_CHRG_DETECT - USB Charger Detect Register
* - HW_USB_ANALOG_USB1_VBUS_DETECT_STAT - USB VBUS Detect Status Register
* - HW_USB_ANALOG_USB1_CHRG_DETECT_STAT - USB Charger Detect Status Register
* - HW_USB_ANALOG_USB1_MISC - USB Misc Register
* - HW_USB_ANALOG_USB2_VBUS_DETECT - USB VBUS Detect Register
* - HW_USB_ANALOG_USB2_CHRG_DETECT - USB Charger Detect Register
* - HW_USB_ANALOG_USB2_VBUS_DETECT_STAT - USB VBUS Detect Status Register
* - HW_USB_ANALOG_USB2_CHRG_DETECT_STAT - USB Charger Detect Status Register
* - HW_USB_ANALOG_USB2_MISC - USB Misc Register
* - HW_USB_ANALOG_DIGPROG - Chip Silicon Version
*
* - hw_usb_analog_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_USB_ANALOG_BASE
#define HW_USB_ANALOG_INSTANCE_COUNT (1) //!< Number of instances of the USB_ANALOG module.
#define REGS_USB_ANALOG_BASE (0x020c8000) //!< Base address for USB_ANALOG.
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB1_VBUS_DETECT - USB VBUS Detect Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB1_VBUS_DETECT - USB VBUS Detect Register (RW)
*
* Reset value: 0x00100004
*
* This register defines controls for USB VBUS detect.
*/
typedef union _hw_usb_analog_usb1_vbus_detect
{
reg32_t U;
struct _hw_usb_analog_usb1_vbus_detect_bitfields
{
unsigned VBUSVALID_THRESH : 3; //!< [2:0] Set the threshold for the VBUSVALID comparator.
unsigned RESERVED0 : 17; //!< [19:3] Reserved.
unsigned VBUSVALID_PWRUP_CMPS : 1; //!< [20] Powers up comparators for vbus_valid detector.
unsigned RESERVED1 : 5; //!< [25:21] Reserved.
unsigned DISCHARGE_VBUS : 1; //!< [26] USB OTG discharge VBUS.
unsigned CHARGE_VBUS : 1; //!< [27] USB OTG charge VBUS.
unsigned RESERVED2 : 4; //!< [31:28] Reserved.
} B;
} hw_usb_analog_usb1_vbus_detect_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB1_VBUS_DETECT register
*/
//@{
#define HW_USB_ANALOG_USB1_VBUS_DETECT_ADDR (REGS_USB_ANALOG_BASE + 0x1a0)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_SET_ADDR (HW_USB_ANALOG_USB1_VBUS_DETECT_ADDR + 0x4)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_CLR_ADDR (HW_USB_ANALOG_USB1_VBUS_DETECT_ADDR + 0x8)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_TOG_ADDR (HW_USB_ANALOG_USB1_VBUS_DETECT_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB1_VBUS_DETECT (*(volatile hw_usb_analog_usb1_vbus_detect_t *) HW_USB_ANALOG_USB1_VBUS_DETECT_ADDR)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_RD() (HW_USB_ANALOG_USB1_VBUS_DETECT.U)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_WR(v) (HW_USB_ANALOG_USB1_VBUS_DETECT.U = (v))
#define HW_USB_ANALOG_USB1_VBUS_DETECT_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_VBUS_DETECT_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB1_VBUS_DETECT_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_VBUS_DETECT_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB1_VBUS_DETECT_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_VBUS_DETECT_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB1_VBUS_DETECT bitfields
*/
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT, field VBUSVALID_THRESH[2:0] (RW)
*
* Set the threshold for the VBUSVALID comparator. This comparator is the most accurate method to
* determine the presence of 5v, and includes hystersis to minimize the need for software debounce
* of the detection. This comparator has ~50mV of hystersis to prevent chattering at the comparator
* trip point.
*
* Values:
* - 4V0 = 000 - 4.0V
* - 4V1 = 001 - 4.1V
* - 4V2 = 010 - 4.2V
* - 4V3 = 011 - 4.3V
* - 4V4 = 100 - 4.4V (default)
* - 4V5 = 101 - 4.5V
* - 4V6 = 110 - 4.6V
* - 4V7 = 111 - 4.7V
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH (0) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH (0x00000007) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH) >> BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH)
//! @brief Format value for bitfield USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH.
#define BF_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH) & BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VBUSVALID_THRESH field to a new value.
#define BW_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v) BF_CS1(USB_ANALOG_USB1_VBUS_DETECT, VBUSVALID_THRESH, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH_V(v) BF_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH(BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__##v)
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V0 (0x0) //!< 4.0V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V1 (0x1) //!< 4.1V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V2 (0x2) //!< 4.2V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V3 (0x3) //!< 4.3V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V4 (0x4) //!< 4.4V (default)
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V5 (0x5) //!< 4.5V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V6 (0x6) //!< 4.6V
#define BV_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_THRESH__4V7 (0x7) //!< 4.7V
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT, field VBUSVALID_PWRUP_CMPS[20] (RW)
*
* Powers up comparators for vbus_valid detector.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS (20) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS (0x00100000) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS) >> BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS)
//! @brief Format value for bitfield USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
#define BF_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS) & BM_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VBUSVALID_PWRUP_CMPS field to a new value.
#define BW_USB_ANALOG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(v) BF_CS1(USB_ANALOG_USB1_VBUS_DETECT, VBUSVALID_PWRUP_CMPS, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT, field DISCHARGE_VBUS[26] (RW)
*
* USB OTG discharge VBUS.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS (26) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS (0x04000000) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS) >> BP_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS)
//! @brief Format value for bitfield USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS.
#define BF_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS) & BM_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DISCHARGE_VBUS field to a new value.
#define BW_USB_ANALOG_USB1_VBUS_DETECT_DISCHARGE_VBUS(v) BF_CS1(USB_ANALOG_USB1_VBUS_DETECT, DISCHARGE_VBUS, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT, field CHARGE_VBUS[27] (RW)
*
* USB OTG charge VBUS.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS (27) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS (0x08000000) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS) >> BP_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS)
//! @brief Format value for bitfield USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS.
#define BF_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS) & BM_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHARGE_VBUS field to a new value.
#define BW_USB_ANALOG_USB1_VBUS_DETECT_CHARGE_VBUS(v) BF_CS1(USB_ANALOG_USB1_VBUS_DETECT, CHARGE_VBUS, v)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB1_CHRG_DETECT - USB Charger Detect Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB1_CHRG_DETECT - USB Charger Detect Register (RW)
*
* Reset value: 0x00000000
*
* This register defines controls for USB charger detect.
*/
typedef union _hw_usb_analog_usb1_chrg_detect
{
reg32_t U;
struct _hw_usb_analog_usb1_chrg_detect_bitfields
{
unsigned RESERVED0 : 18; //!< [17:0] Reserved.
unsigned CHK_CONTACT : 1; //!< [18]
unsigned CHK_CHRG_B : 1; //!< [19]
unsigned EN_B : 1; //!< [20] Control the charger detector.
unsigned RESERVED2 : 11; //!< [31:21] Reserved.
} B;
} hw_usb_analog_usb1_chrg_detect_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB1_CHRG_DETECT register
*/
//@{
#define HW_USB_ANALOG_USB1_CHRG_DETECT_ADDR (REGS_USB_ANALOG_BASE + 0x1b0)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_SET_ADDR (HW_USB_ANALOG_USB1_CHRG_DETECT_ADDR + 0x4)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_CLR_ADDR (HW_USB_ANALOG_USB1_CHRG_DETECT_ADDR + 0x8)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_TOG_ADDR (HW_USB_ANALOG_USB1_CHRG_DETECT_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB1_CHRG_DETECT (*(volatile hw_usb_analog_usb1_chrg_detect_t *) HW_USB_ANALOG_USB1_CHRG_DETECT_ADDR)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_RD() (HW_USB_ANALOG_USB1_CHRG_DETECT.U)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_WR(v) (HW_USB_ANALOG_USB1_CHRG_DETECT.U = (v))
#define HW_USB_ANALOG_USB1_CHRG_DETECT_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_CHRG_DETECT_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB1_CHRG_DETECT_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_CHRG_DETECT_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB1_CHRG_DETECT_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_CHRG_DETECT_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB1_CHRG_DETECT bitfields
*/
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT, field CHK_CONTACT[18] (RW)
*
* Values:
* - NO_CHECK = 0 - Do not check the contact of USB plug.
* - CHECK = 1 - Check whether the USB plug has been in contact with each other
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT (18) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT (0x00040000) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT) >> BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT)
//! @brief Format value for bitfield USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT) & BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHK_CONTACT field to a new value.
#define BW_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT(v) BF_CS1(USB_ANALOG_USB1_CHRG_DETECT, CHK_CONTACT, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT_V(v) BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT(BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT__##v)
#define BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT__NO_CHECK (0x0) //!< Do not check the contact of USB plug.
#define BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CONTACT__CHECK (0x1) //!< Check whether the USB plug has been in contact with each other
//@}
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT, field CHK_CHRG_B[19] (RW)
*
* Values:
* - CHECK = 0 - Check whether a charger (either a dedicated charger or a host charger) is connected to USB port.
* - NO_CHECK = 1 - Do not check whether a charger is connected to the USB port.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B (19) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B (0x00080000) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B) >> BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B)
//! @brief Format value for bitfield USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B) & BM_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHK_CHRG_B field to a new value.
#define BW_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B(v) BF_CS1(USB_ANALOG_USB1_CHRG_DETECT, CHK_CHRG_B, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B_V(v) BF_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B(BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B__##v)
#define BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B__CHECK (0x0) //!< Check whether a charger (either a dedicated charger or a host charger) is connected to USB port.
#define BV_USB_ANALOG_USB1_CHRG_DETECT_CHK_CHRG_B__NO_CHECK (0x1) //!< Do not check whether a charger is connected to the USB port.
//@}
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT, field EN_B[20] (RW)
*
* Control the charger detector.
*
* Values:
* - ENABLE = 0 - Enable the charger detector.
* - DISABLE = 1 - Disable the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_EN_B (20) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_EN_B.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_EN_B (0x00100000) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_EN_B.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_EN_B from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_EN_B(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_EN_B) >> BP_USB_ANALOG_USB1_CHRG_DETECT_EN_B)
//! @brief Format value for bitfield USB_ANALOG_USB1_CHRG_DETECT_EN_B.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_EN_B(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_CHRG_DETECT_EN_B) & BM_USB_ANALOG_USB1_CHRG_DETECT_EN_B)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_B field to a new value.
#define BW_USB_ANALOG_USB1_CHRG_DETECT_EN_B(v) BF_CS1(USB_ANALOG_USB1_CHRG_DETECT, EN_B, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_EN_B_V(v) BF_USB_ANALOG_USB1_CHRG_DETECT_EN_B(BV_USB_ANALOG_USB1_CHRG_DETECT_EN_B__##v)
#define BV_USB_ANALOG_USB1_CHRG_DETECT_EN_B__ENABLE (0x0) //!< Enable the charger detector.
#define BV_USB_ANALOG_USB1_CHRG_DETECT_EN_B__DISABLE (0x1) //!< Disable the charger detector.
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB1_VBUS_DETECT_STAT - USB VBUS Detect Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB1_VBUS_DETECT_STAT - USB VBUS Detect Status Register (RO)
*
* Reset value: 0x00000000
*
* This register defines fields for USB VBUS Detect status.
*/
typedef union _hw_usb_analog_usb1_vbus_detect_stat
{
reg32_t U;
struct _hw_usb_analog_usb1_vbus_detect_stat_bitfields
{
unsigned SESSEND : 1; //!< [0] Session End for USB OTG.
unsigned BVALID : 1; //!< [1] Indicates VBus is valid for a B-peripheral.
unsigned AVALID : 1; //!< [2] Indicates VBus is valid for a A-peripheral.
unsigned VBUS_VALID : 1; //!< [3] VBus valid for USB OTG.
unsigned RESERVED0 : 28; //!< [31:4] Reserved.
} B;
} hw_usb_analog_usb1_vbus_detect_stat_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB1_VBUS_DETECT_STAT register
*/
//@{
#define HW_USB_ANALOG_USB1_VBUS_DETECT_STAT_ADDR (REGS_USB_ANALOG_BASE + 0x1c0)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB1_VBUS_DETECT_STAT (*(volatile hw_usb_analog_usb1_vbus_detect_stat_t *) HW_USB_ANALOG_USB1_VBUS_DETECT_STAT_ADDR)
#define HW_USB_ANALOG_USB1_VBUS_DETECT_STAT_RD() (HW_USB_ANALOG_USB1_VBUS_DETECT_STAT.U)
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB1_VBUS_DETECT_STAT bitfields
*/
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT_STAT, field SESSEND[0] (RO)
*
* Session End for USB OTG. This bit is a read only version of the state of the analog signal. It
* can not be overwritten by software like the SESSEND bit below. NOTE: This bit's default value
* depends on whether VDD5V is present, 0 if VDD5V is present, 1 if VDD5V is not present.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND (0) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND (0x00000001) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND) >> BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_SESSEND)
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT_STAT, field BVALID[1] (RO)
*
* Indicates VBus is valid for a B-peripheral. This bit is a read only version of the state of the
* analog signal. It can not be overritten by software.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID (1) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID (0x00000002) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID) >> BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_BVALID)
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT_STAT, field AVALID[2] (RO)
*
* Indicates VBus is valid for a A-peripheral. This bit is a read only version of the state of the
* analog signal. It can not be overritten by software.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID (2) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID (0x00000004) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID) >> BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_AVALID)
//@}
/*! @name Register USB_ANALOG_USB1_VBUS_DETECT_STAT, field VBUS_VALID[3] (RO)
*
* VBus valid for USB OTG. This bit is a read only version of the state of the analog signal. It can
* not be overwritten by software.
*/
//@{
#define BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID (3) //!< Bit position for USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID.
#define BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID (0x00000008) //!< Bit mask for USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID.
//! @brief Get value of USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID from a register value.
#define BG_USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID) >> BP_USB_ANALOG_USB1_VBUS_DETECT_STAT_VBUS_VALID)
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB1_CHRG_DETECT_STAT - USB Charger Detect Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB1_CHRG_DETECT_STAT - USB Charger Detect Status Register (RO)
*
* Reset value: 0x00000000
*
* This register defines fields for USB charger detect status.
*/
typedef union _hw_usb_analog_usb1_chrg_detect_stat
{
reg32_t U;
struct _hw_usb_analog_usb1_chrg_detect_stat_bitfields
{
unsigned PLUG_CONTACT : 1; //!< [0] State of the USB plug contact detector.
unsigned CHRG_DETECTED : 1; //!< [1] State of charger detection.
unsigned DM_STATE : 1; //!< [2] DM line state output of the charger detector.
unsigned DP_STATE : 1; //!< [3] DP line state output of the charger detector.
unsigned RESERVED0 : 28; //!< [31:4] Reserved.
} B;
} hw_usb_analog_usb1_chrg_detect_stat_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB1_CHRG_DETECT_STAT register
*/
//@{
#define HW_USB_ANALOG_USB1_CHRG_DETECT_STAT_ADDR (REGS_USB_ANALOG_BASE + 0x1d0)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB1_CHRG_DETECT_STAT (*(volatile hw_usb_analog_usb1_chrg_detect_stat_t *) HW_USB_ANALOG_USB1_CHRG_DETECT_STAT_ADDR)
#define HW_USB_ANALOG_USB1_CHRG_DETECT_STAT_RD() (HW_USB_ANALOG_USB1_CHRG_DETECT_STAT.U)
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB1_CHRG_DETECT_STAT bitfields
*/
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT_STAT, field PLUG_CONTACT[0] (RO)
*
* State of the USB plug contact detector.
*
* Values:
* - NO_CONTACT = 0 - The USB plug has not made contact.
* - GOOD_CONTACT = 1 - The USB plug has made good contact.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT (0) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT (0x00000001) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT) >> BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT)
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT_V(v) BF_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT(BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT__##v)
#define BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT__NO_CONTACT (0x0) //!< The USB plug has not made contact.
#define BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_PLUG_CONTACT__GOOD_CONTACT (0x1) //!< The USB plug has made good contact.
//@}
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT_STAT, field CHRG_DETECTED[1] (RO)
*
* State of charger detection. This bit is a read only version of the state of the analog signal.
*
* Values:
* - CHARGER_NOT_PRESENT = 0 - The USB port is not connected to a charger.
* - CHARGER_PRESENT = 1 - A charger (either a dedicated charger or a host charger) is connected to the USB port.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED (1) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED (0x00000002) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED) >> BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED)
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED_V(v) BF_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED(BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED__##v)
#define BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED__CHARGER_NOT_PRESENT (0x0) //!< The USB port is not connected to a charger.
#define BV_USB_ANALOG_USB1_CHRG_DETECT_STAT_CHRG_DETECTED__CHARGER_PRESENT (0x1) //!< A charger (either a dedicated charger or a host charger) is connected to the USB port.
//@}
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT_STAT, field DM_STATE[2] (RO)
*
* DM line state output of the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE (2) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE (0x00000004) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE) >> BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_DM_STATE)
//@}
/*! @name Register USB_ANALOG_USB1_CHRG_DETECT_STAT, field DP_STATE[3] (RO)
*
* DP line state output of the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE (3) //!< Bit position for USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE.
#define BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE (0x00000008) //!< Bit mask for USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE.
//! @brief Get value of USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE from a register value.
#define BG_USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE) >> BP_USB_ANALOG_USB1_CHRG_DETECT_STAT_DP_STATE)
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB1_MISC - USB Misc Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB1_MISC - USB Misc Register (RW)
*
* Reset value: 0x00000002
*
* This register defines controls for USB.
*/
typedef union _hw_usb_analog_usb1_misc
{
reg32_t U;
struct _hw_usb_analog_usb1_misc_bitfields
{
unsigned HS_USE_EXTERNAL_R : 1; //!< [0] Use external resistor to generate the current bias for the high speed transmitter.
unsigned EN_DEGLITCH : 1; //!< [1] Enable the deglitching circuit of the USB PLL output.
unsigned RESERVED0 : 28; //!< [29:2] Reserved.
unsigned EN_CLK_UTMI : 1; //!< [30] Enables the clk to the UTMI block.
unsigned RESERVED1 : 1; //!< [31] Reserved.
} B;
} hw_usb_analog_usb1_misc_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB1_MISC register
*/
//@{
#define HW_USB_ANALOG_USB1_MISC_ADDR (REGS_USB_ANALOG_BASE + 0x1f0)
#define HW_USB_ANALOG_USB1_MISC_SET_ADDR (HW_USB_ANALOG_USB1_MISC_ADDR + 0x4)
#define HW_USB_ANALOG_USB1_MISC_CLR_ADDR (HW_USB_ANALOG_USB1_MISC_ADDR + 0x8)
#define HW_USB_ANALOG_USB1_MISC_TOG_ADDR (HW_USB_ANALOG_USB1_MISC_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB1_MISC (*(volatile hw_usb_analog_usb1_misc_t *) HW_USB_ANALOG_USB1_MISC_ADDR)
#define HW_USB_ANALOG_USB1_MISC_RD() (HW_USB_ANALOG_USB1_MISC.U)
#define HW_USB_ANALOG_USB1_MISC_WR(v) (HW_USB_ANALOG_USB1_MISC.U = (v))
#define HW_USB_ANALOG_USB1_MISC_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_MISC_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB1_MISC_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_MISC_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB1_MISC_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB1_MISC_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB1_MISC bitfields
*/
/*! @name Register USB_ANALOG_USB1_MISC, field HS_USE_EXTERNAL_R[0] (RW)
*
* Use external resistor to generate the current bias for the high speed transmitter. This bit
* should not be changed unless recommended by Freescale.
*/
//@{
#define BP_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R (0) //!< Bit position for USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R.
#define BM_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R (0x00000001) //!< Bit mask for USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R.
//! @brief Get value of USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R from a register value.
#define BG_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R) >> BP_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R)
//! @brief Format value for bitfield USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R.
#define BF_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R) & BM_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R)
#ifndef __LANGUAGE_ASM__
//! @brief Set the HS_USE_EXTERNAL_R field to a new value.
#define BW_USB_ANALOG_USB1_MISC_HS_USE_EXTERNAL_R(v) BF_CS1(USB_ANALOG_USB1_MISC, HS_USE_EXTERNAL_R, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB1_MISC, field EN_DEGLITCH[1] (RW)
*
* Enable the deglitching circuit of the USB PLL output.
*/
//@{
#define BP_USB_ANALOG_USB1_MISC_EN_DEGLITCH (1) //!< Bit position for USB_ANALOG_USB1_MISC_EN_DEGLITCH.
#define BM_USB_ANALOG_USB1_MISC_EN_DEGLITCH (0x00000002) //!< Bit mask for USB_ANALOG_USB1_MISC_EN_DEGLITCH.
//! @brief Get value of USB_ANALOG_USB1_MISC_EN_DEGLITCH from a register value.
#define BG_USB_ANALOG_USB1_MISC_EN_DEGLITCH(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_MISC_EN_DEGLITCH) >> BP_USB_ANALOG_USB1_MISC_EN_DEGLITCH)
//! @brief Format value for bitfield USB_ANALOG_USB1_MISC_EN_DEGLITCH.
#define BF_USB_ANALOG_USB1_MISC_EN_DEGLITCH(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_MISC_EN_DEGLITCH) & BM_USB_ANALOG_USB1_MISC_EN_DEGLITCH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_DEGLITCH field to a new value.
#define BW_USB_ANALOG_USB1_MISC_EN_DEGLITCH(v) BF_CS1(USB_ANALOG_USB1_MISC, EN_DEGLITCH, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB1_MISC, field EN_CLK_UTMI[30] (RW)
*
* Enables the clk to the UTMI block.
*/
//@{
#define BP_USB_ANALOG_USB1_MISC_EN_CLK_UTMI (30) //!< Bit position for USB_ANALOG_USB1_MISC_EN_CLK_UTMI.
#define BM_USB_ANALOG_USB1_MISC_EN_CLK_UTMI (0x40000000) //!< Bit mask for USB_ANALOG_USB1_MISC_EN_CLK_UTMI.
//! @brief Get value of USB_ANALOG_USB1_MISC_EN_CLK_UTMI from a register value.
#define BG_USB_ANALOG_USB1_MISC_EN_CLK_UTMI(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB1_MISC_EN_CLK_UTMI) >> BP_USB_ANALOG_USB1_MISC_EN_CLK_UTMI)
//! @brief Format value for bitfield USB_ANALOG_USB1_MISC_EN_CLK_UTMI.
#define BF_USB_ANALOG_USB1_MISC_EN_CLK_UTMI(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB1_MISC_EN_CLK_UTMI) & BM_USB_ANALOG_USB1_MISC_EN_CLK_UTMI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_CLK_UTMI field to a new value.
#define BW_USB_ANALOG_USB1_MISC_EN_CLK_UTMI(v) BF_CS1(USB_ANALOG_USB1_MISC, EN_CLK_UTMI, v)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB2_VBUS_DETECT - USB VBUS Detect Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB2_VBUS_DETECT - USB VBUS Detect Register (RW)
*
* Reset value: 0x00100004
*
* This register defines controls for USB VBUS detect.
*/
typedef union _hw_usb_analog_usb2_vbus_detect
{
reg32_t U;
struct _hw_usb_analog_usb2_vbus_detect_bitfields
{
unsigned VBUSVALID_THRESH : 3; //!< [2:0] Set the threshold for the VBUSVALID comparator.
unsigned RESERVED0 : 17; //!< [19:3] Reserved.
unsigned VBUSVALID_PWRUP_CMPS : 1; //!< [20] Powers up comparators for vbus_valid detector.
unsigned RESERVED1 : 5; //!< [25:21] Reserved.
unsigned DISCHARGE_VBUS : 1; //!< [26] USB OTG discharge VBUS.
unsigned CHARGE_VBUS : 1; //!< [27] USB OTG charge VBUS.
unsigned RESERVED2 : 4; //!< [31:28] Reserved.
} B;
} hw_usb_analog_usb2_vbus_detect_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB2_VBUS_DETECT register
*/
//@{
#define HW_USB_ANALOG_USB2_VBUS_DETECT_ADDR (REGS_USB_ANALOG_BASE + 0x200)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_SET_ADDR (HW_USB_ANALOG_USB2_VBUS_DETECT_ADDR + 0x4)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_CLR_ADDR (HW_USB_ANALOG_USB2_VBUS_DETECT_ADDR + 0x8)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_TOG_ADDR (HW_USB_ANALOG_USB2_VBUS_DETECT_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB2_VBUS_DETECT (*(volatile hw_usb_analog_usb2_vbus_detect_t *) HW_USB_ANALOG_USB2_VBUS_DETECT_ADDR)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_RD() (HW_USB_ANALOG_USB2_VBUS_DETECT.U)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_WR(v) (HW_USB_ANALOG_USB2_VBUS_DETECT.U = (v))
#define HW_USB_ANALOG_USB2_VBUS_DETECT_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_VBUS_DETECT_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB2_VBUS_DETECT_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_VBUS_DETECT_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB2_VBUS_DETECT_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_VBUS_DETECT_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB2_VBUS_DETECT bitfields
*/
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT, field VBUSVALID_THRESH[2:0] (RW)
*
* Set the threshold for the VBUSVALID comparator. This comparator is the most accurate method to
* determine the presence of 5v, and includes hystersis to minimize the need for software debounce
* of the detection. This comparator has ~50mV of hystersis to prevent chattering at the comparator
* trip point.
*
* Values:
* - 4V0 = 000 - 4.0V
* - 4V1 = 001 - 4.1V
* - 4V2 = 010 - 4.2V
* - 4V3 = 011 - 4.3V
* - 4V4 = 100 - 4.4V (default)
* - 4V5 = 101 - 4.5V
* - 4V6 = 110 - 4.6V
* - 4V7 = 111 - 4.7V
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH (0) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH (0x00000007) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH) >> BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH)
//! @brief Format value for bitfield USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH.
#define BF_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH) & BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VBUSVALID_THRESH field to a new value.
#define BW_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v) BF_CS1(USB_ANALOG_USB2_VBUS_DETECT, VBUSVALID_THRESH, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH_V(v) BF_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH(BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__##v)
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V0 (0x0) //!< 4.0V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V1 (0x1) //!< 4.1V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V2 (0x2) //!< 4.2V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V3 (0x3) //!< 4.3V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V4 (0x4) //!< 4.4V (default)
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V5 (0x5) //!< 4.5V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V6 (0x6) //!< 4.6V
#define BV_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_THRESH__4V7 (0x7) //!< 4.7V
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT, field VBUSVALID_PWRUP_CMPS[20] (RW)
*
* Powers up comparators for vbus_valid detector.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS (20) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS (0x00100000) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS) >> BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS)
//! @brief Format value for bitfield USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS.
#define BF_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS) & BM_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the VBUSVALID_PWRUP_CMPS field to a new value.
#define BW_USB_ANALOG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS(v) BF_CS1(USB_ANALOG_USB2_VBUS_DETECT, VBUSVALID_PWRUP_CMPS, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT, field DISCHARGE_VBUS[26] (RW)
*
* USB OTG discharge VBUS.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS (26) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS (0x04000000) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS) >> BP_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS)
//! @brief Format value for bitfield USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS.
#define BF_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS) & BM_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DISCHARGE_VBUS field to a new value.
#define BW_USB_ANALOG_USB2_VBUS_DETECT_DISCHARGE_VBUS(v) BF_CS1(USB_ANALOG_USB2_VBUS_DETECT, DISCHARGE_VBUS, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT, field CHARGE_VBUS[27] (RW)
*
* USB OTG charge VBUS.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS (27) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS (0x08000000) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS) >> BP_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS)
//! @brief Format value for bitfield USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS.
#define BF_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS) & BM_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHARGE_VBUS field to a new value.
#define BW_USB_ANALOG_USB2_VBUS_DETECT_CHARGE_VBUS(v) BF_CS1(USB_ANALOG_USB2_VBUS_DETECT, CHARGE_VBUS, v)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB2_CHRG_DETECT - USB Charger Detect Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB2_CHRG_DETECT - USB Charger Detect Register (RW)
*
* Reset value: 0x00000000
*
* This register defines controls for USB charger detect.
*/
typedef union _hw_usb_analog_usb2_chrg_detect
{
reg32_t U;
struct _hw_usb_analog_usb2_chrg_detect_bitfields
{
unsigned RESERVED0 : 18; //!< [17:0] Reserved.
unsigned CHK_CONTACT : 1; //!< [18]
unsigned CHK_CHRG_B : 1; //!< [19]
unsigned EN_B : 1; //!< [20] Control the charger detector.
unsigned RESERVED2 : 11; //!< [31:21] Reserved.
} B;
} hw_usb_analog_usb2_chrg_detect_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB2_CHRG_DETECT register
*/
//@{
#define HW_USB_ANALOG_USB2_CHRG_DETECT_ADDR (REGS_USB_ANALOG_BASE + 0x210)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_SET_ADDR (HW_USB_ANALOG_USB2_CHRG_DETECT_ADDR + 0x4)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_CLR_ADDR (HW_USB_ANALOG_USB2_CHRG_DETECT_ADDR + 0x8)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_TOG_ADDR (HW_USB_ANALOG_USB2_CHRG_DETECT_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB2_CHRG_DETECT (*(volatile hw_usb_analog_usb2_chrg_detect_t *) HW_USB_ANALOG_USB2_CHRG_DETECT_ADDR)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_RD() (HW_USB_ANALOG_USB2_CHRG_DETECT.U)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_WR(v) (HW_USB_ANALOG_USB2_CHRG_DETECT.U = (v))
#define HW_USB_ANALOG_USB2_CHRG_DETECT_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_CHRG_DETECT_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB2_CHRG_DETECT_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_CHRG_DETECT_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB2_CHRG_DETECT_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_CHRG_DETECT_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB2_CHRG_DETECT bitfields
*/
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT, field CHK_CONTACT[18] (RW)
*
* Values:
* - NO_CHECK = 0 - Do not check the contact of USB plug.
* - CHECK = 1 - Check whether the USB plug has been in contact with each other
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT (18) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT (0x00040000) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT) >> BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT)
//! @brief Format value for bitfield USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT) & BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHK_CONTACT field to a new value.
#define BW_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT(v) BF_CS1(USB_ANALOG_USB2_CHRG_DETECT, CHK_CONTACT, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT_V(v) BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT(BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT__##v)
#define BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT__NO_CHECK (0x0) //!< Do not check the contact of USB plug.
#define BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CONTACT__CHECK (0x1) //!< Check whether the USB plug has been in contact with each other
//@}
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT, field CHK_CHRG_B[19] (RW)
*
* Values:
* - CHECK = 0 - Check whether a charger (either a dedicated charger or a host charger) is connected to USB port.
* - NO_CHECK = 1 - Do not check whether a charger is connected to the USB port.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B (19) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B (0x00080000) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B) >> BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B)
//! @brief Format value for bitfield USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B) & BM_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHK_CHRG_B field to a new value.
#define BW_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B(v) BF_CS1(USB_ANALOG_USB2_CHRG_DETECT, CHK_CHRG_B, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B_V(v) BF_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B(BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B__##v)
#define BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B__CHECK (0x0) //!< Check whether a charger (either a dedicated charger or a host charger) is connected to USB port.
#define BV_USB_ANALOG_USB2_CHRG_DETECT_CHK_CHRG_B__NO_CHECK (0x1) //!< Do not check whether a charger is connected to the USB port.
//@}
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT, field EN_B[20] (RW)
*
* Control the charger detector.
*
* Values:
* - ENABLE = 0 - Enable the charger detector.
* - DISABLE = 1 - Disable the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_EN_B (20) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_EN_B.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_EN_B (0x00100000) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_EN_B.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_EN_B from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_EN_B(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_EN_B) >> BP_USB_ANALOG_USB2_CHRG_DETECT_EN_B)
//! @brief Format value for bitfield USB_ANALOG_USB2_CHRG_DETECT_EN_B.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_EN_B(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_CHRG_DETECT_EN_B) & BM_USB_ANALOG_USB2_CHRG_DETECT_EN_B)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_B field to a new value.
#define BW_USB_ANALOG_USB2_CHRG_DETECT_EN_B(v) BF_CS1(USB_ANALOG_USB2_CHRG_DETECT, EN_B, v)
#endif
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_EN_B_V(v) BF_USB_ANALOG_USB2_CHRG_DETECT_EN_B(BV_USB_ANALOG_USB2_CHRG_DETECT_EN_B__##v)
#define BV_USB_ANALOG_USB2_CHRG_DETECT_EN_B__ENABLE (0x0) //!< Enable the charger detector.
#define BV_USB_ANALOG_USB2_CHRG_DETECT_EN_B__DISABLE (0x1) //!< Disable the charger detector.
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB2_VBUS_DETECT_STAT - USB VBUS Detect Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB2_VBUS_DETECT_STAT - USB VBUS Detect Status Register (RO)
*
* Reset value: 0x00000000
*
* This register defines fields for USB VBUS Detect status.
*/
typedef union _hw_usb_analog_usb2_vbus_detect_stat
{
reg32_t U;
struct _hw_usb_analog_usb2_vbus_detect_stat_bitfields
{
unsigned SESSEND : 1; //!< [0] Session End for USB OTG.
unsigned BVALID : 1; //!< [1] Indicates VBus is valid for a B-peripheral.
unsigned AVALID : 1; //!< [2] Indicates VBus is valid for a A-peripheral.
unsigned VBUS_VALID : 1; //!< [3] VBus valid for USB OTG.
unsigned RESERVED0 : 28; //!< [31:4] Reserved.
} B;
} hw_usb_analog_usb2_vbus_detect_stat_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB2_VBUS_DETECT_STAT register
*/
//@{
#define HW_USB_ANALOG_USB2_VBUS_DETECT_STAT_ADDR (REGS_USB_ANALOG_BASE + 0x220)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB2_VBUS_DETECT_STAT (*(volatile hw_usb_analog_usb2_vbus_detect_stat_t *) HW_USB_ANALOG_USB2_VBUS_DETECT_STAT_ADDR)
#define HW_USB_ANALOG_USB2_VBUS_DETECT_STAT_RD() (HW_USB_ANALOG_USB2_VBUS_DETECT_STAT.U)
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB2_VBUS_DETECT_STAT bitfields
*/
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT_STAT, field SESSEND[0] (RO)
*
* Session End for USB OTG. This bit is a read only version of the state of the analog signal. It
* can not be overwritten by software like the SESSEND bit below. NOTE: This bit's default value
* depends on whether VDD5V is present, 0 if VDD5V is present, 1 if VDD5V is not present.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND (0) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND (0x00000001) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND) >> BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_SESSEND)
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT_STAT, field BVALID[1] (RO)
*
* Indicates VBus is valid for a B-peripheral. This bit is a read only version of the state of the
* analog signal. It can not be overritten by software.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID (1) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID (0x00000002) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID) >> BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_BVALID)
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT_STAT, field AVALID[2] (RO)
*
* Indicates VBus is valid for a A-peripheral. This bit is a read only version of the state of the
* analog signal. It can not be overritten by software.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID (2) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID (0x00000004) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID) >> BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_AVALID)
//@}
/*! @name Register USB_ANALOG_USB2_VBUS_DETECT_STAT, field VBUS_VALID[3] (RO)
*
* VBus valid for USB OTG. This bit is a read only version of the state of the analog signal. It can
* not be overwritten by software.
*/
//@{
#define BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID (3) //!< Bit position for USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID.
#define BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID (0x00000008) //!< Bit mask for USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID.
//! @brief Get value of USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID from a register value.
#define BG_USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID) >> BP_USB_ANALOG_USB2_VBUS_DETECT_STAT_VBUS_VALID)
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB2_CHRG_DETECT_STAT - USB Charger Detect Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB2_CHRG_DETECT_STAT - USB Charger Detect Status Register (RO)
*
* Reset value: 0x00000000
*
* This register defines fields for USB charger detect status.
*/
typedef union _hw_usb_analog_usb2_chrg_detect_stat
{
reg32_t U;
struct _hw_usb_analog_usb2_chrg_detect_stat_bitfields
{
unsigned PLUG_CONTACT : 1; //!< [0] State of the USB plug contact detector.
unsigned CHRG_DETECTED : 1; //!< [1] State of charger detection.
unsigned DM_STATE : 1; //!< [2] DM line state output of the charger detector.
unsigned DP_STATE : 1; //!< [3] DP line state output of the charger detector.
unsigned RESERVED0 : 28; //!< [31:4] Reserved.
} B;
} hw_usb_analog_usb2_chrg_detect_stat_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB2_CHRG_DETECT_STAT register
*/
//@{
#define HW_USB_ANALOG_USB2_CHRG_DETECT_STAT_ADDR (REGS_USB_ANALOG_BASE + 0x230)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB2_CHRG_DETECT_STAT (*(volatile hw_usb_analog_usb2_chrg_detect_stat_t *) HW_USB_ANALOG_USB2_CHRG_DETECT_STAT_ADDR)
#define HW_USB_ANALOG_USB2_CHRG_DETECT_STAT_RD() (HW_USB_ANALOG_USB2_CHRG_DETECT_STAT.U)
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB2_CHRG_DETECT_STAT bitfields
*/
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT_STAT, field PLUG_CONTACT[0] (RO)
*
* State of the USB plug contact detector.
*
* Values:
* - NO_CONTACT = 0 - The USB plug has not made contact.
* - GOOD_CONTACT = 1 - The USB plug has made good contact.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT (0) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT (0x00000001) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT) >> BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT)
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT_V(v) BF_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT(BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT__##v)
#define BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT__NO_CONTACT (0x0) //!< The USB plug has not made contact.
#define BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_PLUG_CONTACT__GOOD_CONTACT (0x1) //!< The USB plug has made good contact.
//@}
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT_STAT, field CHRG_DETECTED[1] (RO)
*
* State of charger detection. This bit is a read only version of the state of the analog signal.
*
* Values:
* - CHARGER_NOT_PRESENT = 0 - The USB port is not connected to a charger.
* - CHARGER_PRESENT = 1 - A charger (either a dedicated charger or a host charger) is connected to the USB port.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED (1) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED (0x00000002) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED) >> BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED)
//! @brief Macro to simplify usage of value macros.
#define BF_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED_V(v) BF_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED(BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED__##v)
#define BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED__CHARGER_NOT_PRESENT (0x0) //!< The USB port is not connected to a charger.
#define BV_USB_ANALOG_USB2_CHRG_DETECT_STAT_CHRG_DETECTED__CHARGER_PRESENT (0x1) //!< A charger (either a dedicated charger or a host charger) is connected to the USB port.
//@}
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT_STAT, field DM_STATE[2] (RO)
*
* DM line state output of the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE (2) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE (0x00000004) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE) >> BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_DM_STATE)
//@}
/*! @name Register USB_ANALOG_USB2_CHRG_DETECT_STAT, field DP_STATE[3] (RO)
*
* DP line state output of the charger detector.
*/
//@{
#define BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE (3) //!< Bit position for USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE.
#define BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE (0x00000008) //!< Bit mask for USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE.
//! @brief Get value of USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE from a register value.
#define BG_USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE) >> BP_USB_ANALOG_USB2_CHRG_DETECT_STAT_DP_STATE)
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_USB2_MISC - USB Misc Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_USB2_MISC - USB Misc Register (RW)
*
* Reset value: 0x00000002
*
* This register defines controls for USB.
*/
typedef union _hw_usb_analog_usb2_misc
{
reg32_t U;
struct _hw_usb_analog_usb2_misc_bitfields
{
unsigned HS_USE_EXTERNAL_R : 1; //!< [0] Use external resistor to generate the current bias for the high speed transmitter.
unsigned EN_DEGLITCH : 1; //!< [1] Enable the deglitching circuit of the USB PLL output.
unsigned RESERVED0 : 28; //!< [29:2] Reserved.
unsigned EN_CLK_UTMI : 1; //!< [30] Enables the clk to the UTMI block.
unsigned RESERVED1 : 1; //!< [31] Reserved.
} B;
} hw_usb_analog_usb2_misc_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_USB2_MISC register
*/
//@{
#define HW_USB_ANALOG_USB2_MISC_ADDR (REGS_USB_ANALOG_BASE + 0x250)
#define HW_USB_ANALOG_USB2_MISC_SET_ADDR (HW_USB_ANALOG_USB2_MISC_ADDR + 0x4)
#define HW_USB_ANALOG_USB2_MISC_CLR_ADDR (HW_USB_ANALOG_USB2_MISC_ADDR + 0x8)
#define HW_USB_ANALOG_USB2_MISC_TOG_ADDR (HW_USB_ANALOG_USB2_MISC_ADDR + 0xC)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_USB2_MISC (*(volatile hw_usb_analog_usb2_misc_t *) HW_USB_ANALOG_USB2_MISC_ADDR)
#define HW_USB_ANALOG_USB2_MISC_RD() (HW_USB_ANALOG_USB2_MISC.U)
#define HW_USB_ANALOG_USB2_MISC_WR(v) (HW_USB_ANALOG_USB2_MISC.U = (v))
#define HW_USB_ANALOG_USB2_MISC_SET(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_MISC_SET_ADDR) = (v))
#define HW_USB_ANALOG_USB2_MISC_CLR(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_MISC_CLR_ADDR) = (v))
#define HW_USB_ANALOG_USB2_MISC_TOG(v) ((*(volatile reg32_t *) HW_USB_ANALOG_USB2_MISC_TOG_ADDR) = (v))
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_USB2_MISC bitfields
*/
/*! @name Register USB_ANALOG_USB2_MISC, field HS_USE_EXTERNAL_R[0] (RW)
*
* Use external resistor to generate the current bias for the high speed transmitter. This bit
* should not be changed unless recommended by Freescale.
*/
//@{
#define BP_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R (0) //!< Bit position for USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R.
#define BM_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R (0x00000001) //!< Bit mask for USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R.
//! @brief Get value of USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R from a register value.
#define BG_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R) >> BP_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R)
//! @brief Format value for bitfield USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R.
#define BF_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R) & BM_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R)
#ifndef __LANGUAGE_ASM__
//! @brief Set the HS_USE_EXTERNAL_R field to a new value.
#define BW_USB_ANALOG_USB2_MISC_HS_USE_EXTERNAL_R(v) BF_CS1(USB_ANALOG_USB2_MISC, HS_USE_EXTERNAL_R, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB2_MISC, field EN_DEGLITCH[1] (RW)
*
* Enable the deglitching circuit of the USB PLL output.
*/
//@{
#define BP_USB_ANALOG_USB2_MISC_EN_DEGLITCH (1) //!< Bit position for USB_ANALOG_USB2_MISC_EN_DEGLITCH.
#define BM_USB_ANALOG_USB2_MISC_EN_DEGLITCH (0x00000002) //!< Bit mask for USB_ANALOG_USB2_MISC_EN_DEGLITCH.
//! @brief Get value of USB_ANALOG_USB2_MISC_EN_DEGLITCH from a register value.
#define BG_USB_ANALOG_USB2_MISC_EN_DEGLITCH(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_MISC_EN_DEGLITCH) >> BP_USB_ANALOG_USB2_MISC_EN_DEGLITCH)
//! @brief Format value for bitfield USB_ANALOG_USB2_MISC_EN_DEGLITCH.
#define BF_USB_ANALOG_USB2_MISC_EN_DEGLITCH(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_MISC_EN_DEGLITCH) & BM_USB_ANALOG_USB2_MISC_EN_DEGLITCH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_DEGLITCH field to a new value.
#define BW_USB_ANALOG_USB2_MISC_EN_DEGLITCH(v) BF_CS1(USB_ANALOG_USB2_MISC, EN_DEGLITCH, v)
#endif
//@}
/*! @name Register USB_ANALOG_USB2_MISC, field EN_CLK_UTMI[30] (RW)
*
* Enables the clk to the UTMI block.
*/
//@{
#define BP_USB_ANALOG_USB2_MISC_EN_CLK_UTMI (30) //!< Bit position for USB_ANALOG_USB2_MISC_EN_CLK_UTMI.
#define BM_USB_ANALOG_USB2_MISC_EN_CLK_UTMI (0x40000000) //!< Bit mask for USB_ANALOG_USB2_MISC_EN_CLK_UTMI.
//! @brief Get value of USB_ANALOG_USB2_MISC_EN_CLK_UTMI from a register value.
#define BG_USB_ANALOG_USB2_MISC_EN_CLK_UTMI(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_USB2_MISC_EN_CLK_UTMI) >> BP_USB_ANALOG_USB2_MISC_EN_CLK_UTMI)
//! @brief Format value for bitfield USB_ANALOG_USB2_MISC_EN_CLK_UTMI.
#define BF_USB_ANALOG_USB2_MISC_EN_CLK_UTMI(v) ((__REG_VALUE_TYPE((v), reg32_t) << BP_USB_ANALOG_USB2_MISC_EN_CLK_UTMI) & BM_USB_ANALOG_USB2_MISC_EN_CLK_UTMI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EN_CLK_UTMI field to a new value.
#define BW_USB_ANALOG_USB2_MISC_EN_CLK_UTMI(v) BF_CS1(USB_ANALOG_USB2_MISC, EN_CLK_UTMI, v)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_USB_ANALOG_DIGPROG - Chip Silicon Version
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_USB_ANALOG_DIGPROG - Chip Silicon Version (RO)
*
* Reset value: 0x00000000
*
* The DIGPROG register returns the digital program ID for the silicon.
*/
typedef union _hw_usb_analog_digprog
{
reg32_t U;
struct _hw_usb_analog_digprog_bitfields
{
unsigned MINOR : 8; //!< [7:0] Fixed read-only value reflecting the MINOR field of the RTL version.
unsigned MAJOR : 16; //!< [23:8] Fixed read-only value reflecting the MAJOR field of the RTL version.
unsigned RESERVED0 : 8; //!< [31:24] Reserved.
} B;
} hw_usb_analog_digprog_t;
#endif
/*!
* @name Constants and macros for entire USB_ANALOG_DIGPROG register
*/
//@{
#define HW_USB_ANALOG_DIGPROG_ADDR (REGS_USB_ANALOG_BASE + 0x260)
#ifndef __LANGUAGE_ASM__
#define HW_USB_ANALOG_DIGPROG (*(volatile hw_usb_analog_digprog_t *) HW_USB_ANALOG_DIGPROG_ADDR)
#define HW_USB_ANALOG_DIGPROG_RD() (HW_USB_ANALOG_DIGPROG.U)
#endif
//@}
/*
* constants & macros for individual USB_ANALOG_DIGPROG bitfields
*/
/*! @name Register USB_ANALOG_DIGPROG, field MINOR[7:0] (RO)
*
* Fixed read-only value reflecting the MINOR field of the RTL version.
*/
//@{
#define BP_USB_ANALOG_DIGPROG_MINOR (0) //!< Bit position for USB_ANALOG_DIGPROG_MINOR.
#define BM_USB_ANALOG_DIGPROG_MINOR (0x000000ff) //!< Bit mask for USB_ANALOG_DIGPROG_MINOR.
//! @brief Get value of USB_ANALOG_DIGPROG_MINOR from a register value.
#define BG_USB_ANALOG_DIGPROG_MINOR(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_DIGPROG_MINOR) >> BP_USB_ANALOG_DIGPROG_MINOR)
//@}
/*! @name Register USB_ANALOG_DIGPROG, field MAJOR[23:8] (RO)
*
* Fixed read-only value reflecting the MAJOR field of the RTL version.
*/
//@{
#define BP_USB_ANALOG_DIGPROG_MAJOR (8) //!< Bit position for USB_ANALOG_DIGPROG_MAJOR.
#define BM_USB_ANALOG_DIGPROG_MAJOR (0x00ffff00) //!< Bit mask for USB_ANALOG_DIGPROG_MAJOR.
//! @brief Get value of USB_ANALOG_DIGPROG_MAJOR from a register value.
#define BG_USB_ANALOG_DIGPROG_MAJOR(r) ((__REG_VALUE_TYPE((r), reg32_t) & BM_USB_ANALOG_DIGPROG_MAJOR) >> BP_USB_ANALOG_DIGPROG_MAJOR)
//@}
//-------------------------------------------------------------------------------------------
// hw_usb_analog_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All USB_ANALOG module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_usb_analog
{
reg32_t _reserved0[104];
volatile hw_usb_analog_usb1_vbus_detect_t USB1_VBUS_DETECT; //!< USB VBUS Detect Register
volatile reg32_t USB1_VBUS_DETECT_SET; //!< USB VBUS Detect Register Set
volatile reg32_t USB1_VBUS_DETECT_CLR; //!< USB VBUS Detect Register Clear
volatile reg32_t USB1_VBUS_DETECT_TOG; //!< USB VBUS Detect Register Toggle
volatile hw_usb_analog_usb1_chrg_detect_t USB1_CHRG_DETECT; //!< USB Charger Detect Register
volatile reg32_t USB1_CHRG_DETECT_SET; //!< USB Charger Detect Register Set
volatile reg32_t USB1_CHRG_DETECT_CLR; //!< USB Charger Detect Register Clear
volatile reg32_t USB1_CHRG_DETECT_TOG; //!< USB Charger Detect Register Toggle
volatile hw_usb_analog_usb1_vbus_detect_stat_t USB1_VBUS_DETECT_STAT; //!< USB VBUS Detect Status Register
reg32_t _reserved1[3];
volatile hw_usb_analog_usb1_chrg_detect_stat_t USB1_CHRG_DETECT_STAT; //!< USB Charger Detect Status Register
reg32_t _reserved2[7];
volatile hw_usb_analog_usb1_misc_t USB1_MISC; //!< USB Misc Register
volatile reg32_t USB1_MISC_SET; //!< USB Misc Register Set
volatile reg32_t USB1_MISC_CLR; //!< USB Misc Register Clear
volatile reg32_t USB1_MISC_TOG; //!< USB Misc Register Toggle
volatile hw_usb_analog_usb2_vbus_detect_t USB2_VBUS_DETECT; //!< USB VBUS Detect Register
volatile reg32_t USB2_VBUS_DETECT_SET; //!< USB VBUS Detect Register Set
volatile reg32_t USB2_VBUS_DETECT_CLR; //!< USB VBUS Detect Register Clear
volatile reg32_t USB2_VBUS_DETECT_TOG; //!< USB VBUS Detect Register Toggle
volatile hw_usb_analog_usb2_chrg_detect_t USB2_CHRG_DETECT; //!< USB Charger Detect Register
volatile reg32_t USB2_CHRG_DETECT_SET; //!< USB Charger Detect Register Set
volatile reg32_t USB2_CHRG_DETECT_CLR; //!< USB Charger Detect Register Clear
volatile reg32_t USB2_CHRG_DETECT_TOG; //!< USB Charger Detect Register Toggle
volatile hw_usb_analog_usb2_vbus_detect_stat_t USB2_VBUS_DETECT_STAT; //!< USB VBUS Detect Status Register
reg32_t _reserved3[3];
volatile hw_usb_analog_usb2_chrg_detect_stat_t USB2_CHRG_DETECT_STAT; //!< USB Charger Detect Status Register
reg32_t _reserved4[7];
volatile hw_usb_analog_usb2_misc_t USB2_MISC; //!< USB Misc Register
volatile reg32_t USB2_MISC_SET; //!< USB Misc Register Set
volatile reg32_t USB2_MISC_CLR; //!< USB Misc Register Clear
volatile reg32_t USB2_MISC_TOG; //!< USB Misc Register Toggle
volatile hw_usb_analog_digprog_t DIGPROG; //!< Chip Silicon Version
} hw_usb_analog_t;
#pragma pack()
//! @brief Macro to access all USB_ANALOG registers.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_USB_ANALOG</code>.
#define HW_USB_ANALOG (*(hw_usb_analog_t *) REGS_USB_ANALOG_BASE)
#endif
#endif // __HW_USB_ANALOG_REGISTERS_H__
// v18/121106/1.2.2
// EOF
Reference in New Issue View Git Blame Copy Permalink