Ubiquitous/RT-Thread/:add atti-arm32-board bsp

1.Modify the peripheral interface of the development board 2.Complete configuration files and build files 3.GCC is supported
2022-04-02 09:51:33 +08:00
parent e6101ab1d4
commit da9ff9a53a
34 changed files with 6157 additions and 0 deletions
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     SummerGift   first version
+ */
+
+#include "board.h"
+
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
+
+  /**Configure the main internal regulator output voltage 
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+  /**Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE
+                              |RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
+  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 4;
+  RCC_OscInitStruct.PLL.PLLN = 168;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /**Initializes the CPU, AHB and APB busses clocks 
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
+  PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
+  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}