Modify app address, for AT cmd

APP_Framework/Framework/connection/4g/ec801e/ec801e.c

@@ -200,15 +200,26 @@ static int Ec801eConnect(struct Adapter *adapter, enum NetRoleType net_role, con
     int try = 0;
     uint8_t ec801e_cmd[64];
 
-    ADAPTER_DEBUG("%s enter\n", __func__);
+    printf("%s enter\n", __func__);
 
     AtSetReplyEndChar(adapter->agent, 0x4F, 0x4B);
 
     /*step1: serial write "+++", quit transparent mode*/
     PrivTaskDelay(1500); //before +++ command, wait at least 1s
-    ATOrderSend(adapter->agent, REPLY_TIME_OUT, NULL, "+++");
+    ATOrderSend(adapter->agent, REPLY_TIME_OUT, NULL, EC801E_AT_MODE_CMD);
     PrivTaskDelay(1500); //after +++ command, wait at least 1s
 
+    for(try = 0; try < TRY_TIMES; try++){
+        ret = AtCmdConfigAndCheck(adapter->agent, EC801E_ATI_CMD, EC801E_OK_REPLY);
+        if (ret == 0) {
+            break;
+        }
+    }
+    if (ret < 0) {
+        goto out;
+    }
+    PrivTaskDelay(300);
+
     /*step2: serial write "AT+CPIN?", check SIM status*/
     for(try = 0; try < TRY_TIMES; try++){
         ret = AtCmdConfigAndCheck(adapter->agent, EC801E_GET_CPIN_CMD, EC801E_READY_REPLY);

APP_Framework/Framework/connection/adapter.c

@@ -407,7 +407,7 @@ int AdapterDeviceConnect(struct Adapter *adapter, enum NetRoleType net_role, con
     
         if (NULL == ip_done->connect)
             return -1;
-    
+        printf("AdapterDeviceConnect to connect ip=%s port=%s\n", ip, port);
         return ip_done->connect(adapter, net_role, ip, port, ip_type);
     } else {
         printf("AdapterDeviceConnect net_protocol %d not support\n", adapter->net_protocol);

APP_Framework/Framework/connection/adapter_agent.c

@@ -589,6 +589,7 @@ static void *ATAgentReceiveProcess(void *param)
                     memset(reply->reply_buffer, 0, reply->reply_max_len);
                     memcpy(reply->reply_buffer, agent->maintain_buffer, agent->maintain_len);
                     reply->reply_len = agent->maintain_len;
+                    printf("%s reply->reply_buffer=%s\n", __func__, reply->reply_buffer);
                 }
                 else
                 {

APP_Framework/lib/mqtt/platform_mqtt.c

@@ -74,8 +74,8 @@ out:
     if (ret < 0) 
     {
         AdapterDeviceClose(adapter);
+        KPrintf("%s fail\n", __func__);
     }
-    KPrintf("%s fail\n", __func__);
 
     return ret;
 }

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/.defconfig_boot

@@ -22,6 +22,7 @@ CONFIG_BSP_USING_LTE=y
 CONFIG_LTE_BUS_NAME="lte"
 CONFIG_LTE_DRV_NAME="lte_drv"
 CONFIG_LTE_DEVICE_NAME_1="lte_dev1"
+# CONFIG_LTE_TEST is not set
 
 #
 # Hardware feature
@@ -101,6 +102,8 @@ CONFIG_KERNEL_CONSOLEBUF_SIZE=128
 # Command shell
 #
 # CONFIG_TOOL_SHELL is not set
+# CONFIG_SHELL_ENTER_CR_AND_LF is not set
+# CONFIG_SHELL_ENTER_CRLF is not set
 
 #
 # Kernel data structure Manage
@@ -166,6 +169,8 @@ CONFIG_FS_VFS_DEVFS=y
 CONFIG_TOOL_USING_OTA=y
 CONFIG_MCUBOOT_BOOTLOADER=y
 # CONFIG_MCUBOOT_APPLICATION is not set
+# CONFIG_OTA_BY_PLATFORM is not set
+# CONFIG_OTA_BY_TCPSERVER is not set
 
 #
 # Flash area address and size configuration.

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/link_application.ld

@@ -27,7 +27,7 @@ MEMORY
    FLASH-160K + RAM-32K
 */
 	/*FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 448K*/
-	FLASH (rx) : ORIGIN = 0x0001c000, LENGTH = 364K
+	FLASH (rx) : ORIGIN = 0x00010000, LENGTH = 412K
 	RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
 }
 

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/link_bootloader.ld

@@ -26,7 +26,7 @@ MEMORY
    FLASH-144K + RAM-48K
    FLASH-160K + RAM-32K
 */
-	FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 112K
+	FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 64K
 	RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
 }
 

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/third_party_driver/Kconfig

@@ -109,5 +109,8 @@ menuconfig BSP_USING_LTE
         config LTE_DEVICE_NAME_1
             string "lte bus device 1 name"
             default "lte_dev1"
+        config LTE_TEST
+            bool "Enable lte test"
+            default y
     endif	
 	

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/third_party_driver/include/boot_for_ota.h

@@ -22,7 +22,7 @@
 #define __BOOT_FOR_OTA_H__
 
 #define IMAGE_IAP_START_ADD    0x08000000
-#define IMAGE_IAP_SIZE         (112 * 1024)
+#define IMAGE_IAP_SIZE         (64 * 1024)
 #define IMAGE_A_START_ADD      (IMAGE_IAP_START_ADD + IMAGE_IAP_SIZE)
 
 void mcuboot_bord_init(void);

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/third_party_driver/lte/Makefile

@@ -1,5 +1,7 @@
 # SRC_FILES := connect_uart.c test_uart.c
-SRC_DIR := test
+ifeq ($(CONFIG_LTE_TEST),y)
+  SRC_DIR := test
+endif
 SRC_FILES := connect_lte.c
 
 include $(KERNEL_ROOT)/compiler.mk

Ubiquitous/XiZi_IIoT/board/ch32v208rbt6/third_party_driver/uart/connect_uart.c

@@ -221,7 +221,7 @@ static int SerialGetChar(struct SerialHardwareDevice *serial_dev) {
     if (RESET != USART_GetFlagStatus((USART_TypeDef *)serial_cfg->hw_cfg.serial_register_base, USART_FLAG_RXNE)) {
         ch = USART_ReceiveData((USART_TypeDef *)serial_cfg->hw_cfg.serial_register_base) & 0xff;
     }
-#ifdef BSP_USING_LTE
+#ifdef LTE_TEST
 #define TRANSPARENT_TRANSMISSION_MODE 0  // 数据透传模式
 #define COMMAND_LINE_MODE 1              // 命令行模式
                                          /* lte模式下，实现DBG串口和MAIN串口的数据转发 */