floratest5/xiuos
1
0
Fork 0
forked from xuos/xiuos
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

support rtc SPI I2C eeprom ADC

Browse Source
This commit is contained in:
wlyu
2022-03-09 16:32:50 +08:00
parent 30ab8676f1
commit f69edc63ba
27 changed files with 231 additions and 5568 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Ubiquitous/XiZi/board/ok1052-c/include/board.h
-13
View File
@@ -5,19 +5,6 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2020 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file board.h
* @brief define imxrt1052-board init configure and start-up function
Ubiquitous/XiZi/board/ok1052-c/third_party_driver/Kconfig
+44
View File
@@ -11,6 +11,50 @@ menuconfig BSP_USING_LWIP
default n
select RESOURCES_LWIP
menuconfig BSP_USING_GPIO
bool "Using GPIO device "
default y
select RESOURCES_PIN
if BSP_USING_GPIO
source "$BSP_DIR/third_party_driver/gpio/Kconfig"
endif
menuconfig BSP_USING_I2C
bool "Using I2C device"
default y
select RESOURCES_I2C
if BSP_USING_I2C
source "$BSP_DIR/third_party_driver/i2c/Kconfig"
endif
menuconfig BSP_USING_ADC
bool "Using ADC device"
default y
select RESOURCES_ADC
if BSP_USING_ADC
source "$BSP_DIR/third_party_driver/adc/Kconfig"
endif
menuconfig BSP_USING_SPI
bool "Using SPI device"
default y
select RESOURCES_SPI
if BSP_USING_SPI
source "$BSP_DIR/third_party_driver/spi/Kconfig"
endif
menuconfig BSP_USING_RTC
bool "Using RTC device"
default n
select RESOURCES_RTC
if BSP_USING_RTC
source "$BSP_DIR/third_party_driver/rtc/Kconfig"
endif
menuconfig BSP_USING_SEMC
bool "Using SEMC device"
default n
Ubiquitous/XiZi/board/ok1052-c/third_party_driver/Makefile
+17
View File
@@ -8,10 +8,27 @@ ifeq ($(CONFIG_BSP_USING_LWIP),y)
SRC_DIR += ethernet
endif
ifeq ($(CONFIG_BSP_USING_I2C),y)
SRC_DIR += i2c
endif
ifeq ($(CONFIG_BSP_USING_ADC),y)
SRC_DIR += adc
endif
ifeq ($(CONFIG_BSP_USING_SPI),y)
SRC_DIR += spi
endif
ifeq ($(CONFIG_BSP_USING_SEMC),y)
SRC_DIR += semc
endif
ifeq ($(CONFIG_BSP_USING_RTC),y)
SRC_DIR += rtc
endif
ifeq ($(CONFIG_BSP_USING_SDIO),y)
SRC_DIR += sdio
endif
Ubiquitous/XiZi/board/ok1052-c/third_party_driver/common/pin_mux.c
+139
View File
@@ -749,6 +749,115 @@ BOARD_InitPins:
* Description : Configures pin routing and optionally pin electrical features.
*
* END ****************************************************************************************************************/
void BOARD_InitSPIPins ( void )
{
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK, /* GPIO_AD_B0_00 is configured as LPSPI3_SCK */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO, /* GPIO_AD_B0_01 is configured as LPSPI3_SDO */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI, /* GPIO_AD_B0_02 is configured as LPSPI3_SDI */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0, /* GPIO_AD_B0_03 is configured as LPSPI3_PCS0 */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK, /* GPIO_SD_B0_00 is configured as LPSPI1_SCK */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0, /* GPIO_SD_B0_01 is configured as LPSPI1_PCS0 */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO, /* GPIO_SD_B0_02 is configured as LPSPI1_SDO */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinMux (
IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI, /* GPIO_SD_B0_03 is configured as LPSPI1_SDI */
0U ); /* Software Input On Field: Input Path is determined by functionality */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK, /* GPIO_AD_B0_00 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO, /* GPIO_AD_B0_01 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI, /* GPIO_AD_B0_02 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0, /* GPIO_AD_B0_03 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK, /* GPIO_SD_B0_00 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0, /* GPIO_SD_B0_01 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO, /* GPIO_SD_B0_02 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI, /* GPIO_SD_B0_03 PAD functional properties : */
0x10B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Disabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 100K Ohm Pull Down
Hyst. Enable Field: Hysteresis Disabled */
}
void BOARD_InitPins(void) {
CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
@@ -964,6 +1073,36 @@ void BOARD_InitPins(void) {
Hyst. Enable Field: Hysteresis Disabled */
}
void BOARD_InitI2C1Pins ( void )
{
CLOCK_EnableClock ( kCLOCK_Iomuxc ); /* iomuxc clock (iomuxc_clk_enable): 0x03u */
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 is configured as LPI2C1_SCL */
1U ); /* Software Input On Field: Force input path of pad GPIO_AD_B1_00 */
IOMUXC_SetPinMux (
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 is configured as LPI2C1_SDA */
1U ); /* Software Input On Field: Force input path of pad GPIO_AD_B1_01 */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, /* GPIO_AD_B1_00 PAD functional properties : */
0xD8B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
IOMUXC_SetPinConfig (
IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, /* GPIO_AD_B1_01 PAD functional properties : */
0xD8B0u ); /* Slew Rate Field: Slow Slew Rate
Drive Strength Field: R0/6
Speed Field: medium(100MHz)
Open Drain Enable Field: Open Drain Enabled
Pull / Keep Enable Field: Pull/Keeper Enabled
Pull / Keep Select Field: Keeper
Pull Up / Down Config. Field: 22K Ohm Pull Up
Hyst. Enable Field: Hysteresis Disabled */
}
/***********************************************************************************************************************
* EOF
**********************************************************************************************************************/
Ubiquitous/XiZi/board/ok1052-c/third_party_driver/include/connect_spi.h
-1
View File
@@ -21,7 +21,6 @@
#ifndef CONNECT_SPI_H
#define CONNECT_SPI_H
#include <xiuos.h>
#include <device.h>
#ifdef __cplusplus