move aiit-arm32-board and aiit-riscv64-board to aiit_board

2022-03-04 14:48:58 +08:00
parent 96ecc0324f
commit a5f48c65b7
118 changed files with 9 additions and 2 deletions
@@ -0,0 +1,125 @@
+#
+# For a description of the syntax of this configuration file,
+# see the file kconfig-language.txt in the NuttX tools repository.
+#
+
+if ARCH_BOARD_STM32F4_AIIT
+
+config STM32F4DISBB
+	bool "STM32F4DIS-BB base board"
+	default n
+	---help---
+		Select if you are using the STM32F4DIS-BB base board with the
+		STM32F4Discovery.
+
+config STM32F4AIIT
+	bool "STM32F4AIIT base board"
+	default n
+	---help---
+		Select if you are using the STM32F4AIIT base board with the
+		STM32F4AIIT.
+
+config STM32_ROMFS
+	bool "Automount baked-in ROMFS image"
+	default n
+	depends on FS_ROMFS
+	---help---
+		Select STM32_ROMFS_IMAGEFILE, STM32_ROMFS_DEV_MINOR, STM32_ROMFS_MOUNTPOINT
+
+config STM32_ROMFS_DEV_MINOR
+	int "Minor for the block device backing the data"
+	depends on STM32_ROMFS
+	default 64
+
+config STM32_ROMFS_MOUNTPOINT
+	string "Mountpoint of the custom romfs image"
+	depends on STM32_ROMFS
+	default "/rom"
+
+config STM32_ROMFS_IMAGEFILE
+	string "ROMFS image file to include into build"
+	depends on STM32_ROMFS
+	default "../../../../../rom.img"
+
+config STM32F4DISCO_USBHOST_STACKSIZE
+	int "USB host waiter stack size"
+	default 1024
+	depends on USBHOST
+
+config STM32F4DISCO_USBHOST_PRIO
+	int "USB host waiter task priority"
+	default 100
+	depends on USBHOST
+
+config STM32F4DISCO_QETIMER
+	int "Timer to use with QE encoder"
+	default 2
+	depends on SENSORS_QENCODER
+
+config STM32F4DISCO_LIS3DSH
+	bool "Enable LIS3DSH driver for the IMU on STM32F4Discovery (rev. MB997C)"
+	default n
+	depends on SPI
+	depends on LIS3DSH
+	default n
+	select SENSORS_LIS3DSH
+	---help---
+		Select to create a LIS3DSH driver instance for the builtin accelerometer of
+		STM32F4Discovery. Provides /dev/acc0 device file.
+		Also see apps/examples/lis3dsh_reader.
+		The LIS3DSH is available on the STM32F4Discovery rev. MB997C (see the board manual).
+
+config PM_BUTTONS
+	bool "PM button support"
+	default n
+	depends on PM && ARCH_IRQBUTTONS
+	---help---
+		Enable PM button EXTI interrupts to support PM testing
+
+config PM_BUTTON_ACTIVITY
+	int "Button PM activity weight"
+	default 10
+	depends on PM_BUTTONS
+	---help---
+		The activity weight to report to the power management subsystem when
+		a button is pressed.
+
+config PM_ALARM_SEC
+	int "PM_STANDBY delay (seconds)"
+	default 15
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY
+		mode.
+
+config PM_ALARM_NSEC
+	int "PM_STANDBY delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_STANDBY before going
+		to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP
+	bool "PM_SLEEP wake-up alarm"
+	default n
+	depends on PM && RTC_ALARM
+	---help---
+		Wake-up of PM_SLEEP mode after a delay and resume normal operation.
+
+config PM_SLEEP_WAKEUP_SEC
+	int "PM_SLEEP delay (seconds)"
+	default 10
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP_NSEC
+	int "PM_SLEEP delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_SLEEP before going to
+		PM_STANDBY mode.
+
+endif