Fix#12355.
In the issue, it was reported that the `reorder_items` has quadratic (or
worse...) behavior with certain simple parametrizations. After some
debugging I found that the problem happens because the "Fix
items_by_argkey order" loop keeps adding the same item to the deque,
and it reaches epic sizes which causes the slowdown.
I don't claim to understand how the `reorder_items` algorithm works, but
if as far as I understand, if an item already exists in the deque, the
correct thing to do is to move it to the front. Since a deque doesn't
have such an (efficient) operation, this switches to `OrderedDict` which
can efficiently append from both sides, deduplicate and move to front.
The `.parent` was incorrectly removed in
a21fb87a90, but it was actually correct
(well, it assumes that Module.path.parent == Package.path, which I'm not
sure is always correct, but that's a different matter). Restore it.
Fix#12328.
and also fixes a regression in pytest 8.0.0 where `setup_method` crashes
if the class has static or class method tests.
It is allowed to have a test class with static/class methods which
request non-static/class method fixtures (including `setup_method`
xunit-fixture). I take it as a given that we need to support this
somewhat odd scenario (stdlib unittest also supports it).
This raises a question -- when a staticmethod test requests a bound
fixture, what is that fixture's `self`?
stdlib unittest says - a fresh instance for the test.
Previously, pytest said - some instance that is shared by all
static/class methods. This is definitely broken since it breaks test
isolation.
Change pytest to behave like stdlib unittest here.
In practice, this means stopping to rely on `self.obj.__self__` to get
to the instance from the test function's binding. This doesn't work
because staticmethods are not bound to anything.
Instead, keep the instance explicitly and use that.
BTW, I think this will allow us to change `Class`'s fixture collection
(`parsefactories`) to happen on the class itself instead of a class
instance, allowing us to avoid one class instantiation. But needs more
work.
Fixes#12065.
- Separate the requesting from the requested.
- Avoid the term "factory", I think most people don't distinguish
between "fixture" and "fixture function" (i.e. "factory") and would
find the term "factory" unfamiliar.
Previously, if more than one fixture finalizer raised, only the first
was reported, and the other errors were lost.
Use an exception group to report them all. This is similar to the change
we made in node teardowns (in `SetupState`).
Dicts these days preserve order, so the sort is no longer needed to
achieve determinism.
As shown by the `test_dynamic_parametrized_ordering` test, this can
change the ordering of items, but only in equivalent ways (same number
of setups/teardowns per scope), it will just respect the user's given
ordering better (hence `vxlan` items now ordered before `vlan` items
compared to the previous ordering).
* Improve error message when using @pytest.fixture twice
While obvious in hindsight, this error message confused me. I thought my fixture
function was used in a test function twice, since the wording is ambiguous.
Also, the error does not tell me *which* function is the culprit.
Finally, this adds a test, which wasn't done in
cfd16d0dac where this was originally implemented.
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
---------
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
ruff is faster and handle everything we had prior.
isort configuration done based on the indication from
https://github.com/astral-sh/ruff/issues/4670, previousely based on
reorder-python-import (#11896)
flake8-docstrings was a wrapper around pydocstyle (now archived) that
explicitly asks to use ruff in https://github.com/PyCQA/pydocstyle/pull/658.
flake8-typing-import is useful mainly for project that support python 3.7
and the one useful check will be implemented in https://github.com/astral-sh/ruff/issues/2302
We need to keep blacken-doc because ruff does not handle detection
of python code inside .md and .rst. The direct link to the repo is
now used to avoid a redirection.
Manual fixes:
- Lines that became too long
- % formatting that was not done automatically
- type: ignore that were moved around
- noqa of hard to fix issues (UP031 generally)
- fmt: off and fmt: on that is not really identical
between black and ruff
- autofix re-order in pre-commit from faster to slower
Co-authored-by: Ran Benita <ran@unusedvar.com>
Change our mypy configuration to disallow untyped defs by default, which ensures *new* files added to the code base are fully typed.
To avoid having to type-annotate everything now, add `# mypy: allow-untyped-defs` to files which are not fully type annotated yet.
As we fully type annotate those modules, we can then just remove that directive from the top.
Refs #11662.
--- Problem
Each fixture definition has a "visibility", the `FixtureDef.baseid`
attribute. This is nodeid-like string. When a certain `node` requests a
certain fixture name, we match node's nodeid against the fixture
definitions with this name.
The matching currently happens on the *textual* representation of the
nodeid - we split `node.nodeid` to its "parent nodeids" and then check
if the fixture's `baseid` is in there.
While this has worked so far, we really should try to avoid textual
manipulation of nodeids as much as possible. It has also caused problem
in an odd case of a `Package` in the root directory: the `Package` gets
nodeid `.`, while a `Module` in it gets nodeid `test_module.py`. And
textually, `.` is not a parent of `test_module.py`.
--- Solution
Avoid this entirely by just checking the node hierarchy itself. This is
made possible by the fact that we now have proper `Directory` nodes
(`Dir` or `Package`) for the entire hierarchy.
Also do the same for `_getautousenames` which is a similar deal.
The `iterparentnodeids` function is no longer used and is removed.
Previously, the `_getconftestmodules` function was used both to load
conftest modules for a path (during `pytest_load_initial_conftests`),
and to retrieve conftest modules for a path (during hook dispatch and
for fetching `collect_ignore`). This made things muddy - it is usually
nicer to have clear separation between "command" and "query" functions,
when they occur in separate phases.
So split into "load" and "get".
Currently, `gethookproxy` still loads conftest itself. I hope to change
this in the future.
This test makes clear the need for the `_check_scope()` call in the
`pytest_setup_fixture` impl in fixtures.py, which otherwise seems
redundant with the one in `_compute_fixture_value`.
* Fix non-sensical error message
Introduced in 12de92cd2b / #7698
* Add a test
* Put the unit back into unittest
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
It is not clear yet how we should proceed with this deprecation
because `pytest.Item.reportinfo` is public API and returns a `py.path` object,
and is not clear how plugins and our examples should handle that.
Reverting just the deprecation aspect of #8251 so we can get a 7.0.0 release out.
We will reintroduce the deprecation later once we have a clear path moving forward with replacing `reportinfo`.
Closes#8445Closes#8821
* add feature to view fixture source location in invocations with --fixtures-per-test option
* remove unrelated changes to show_fixtures_per_test::test_doctest_items
* eshew the extraneous else in _show_fixtures_per_test.write_fixture
* enable the accommodation of multi-line docstring with --fixtures-per-test option
* add feature to view fixture source location in invocations with --fixtures
* add colour encoding to fixture location paths
* add changelog for #8606 fixing
* [pre-commit.ci] auto fixes from pre-commit.com hooks
for more information, see https://pre-commit.ci
Co-authored-by: pre-commit-ci[bot] <66853113+pre-commit-ci[bot]@users.noreply.github.com>
In order to allow users to type annotate fixtures they request, the
types need to be imported from the `pytest` namespace. They are/were
always available to import from the `_pytest` namespace, but that is
not guaranteed to be stable.
These types are only exported for the purpose of typing. Specifically,
the following are *not* public:
- Construction (`__init__`)
- Subclassing
- staticmethods and classmethods
We try to combat them being used anyway by:
- Marking the classes as `@final` when possible (already done).
- Not documenting private stuff in the API Reference.
- Using `_`-prefixed names or marking as `:meta private:` for private
stuff.
- Adding a keyword-only `_ispytest=False` to private constructors,
warning if False, and changing pytest itself to pass True. In the
future it will (hopefully) become a hard error.
Hopefully that will be enough.
