Prepare 2.8.7 release

CHANGELOG

@@ -1,7 +1,7 @@
-2.8.7.dev1
+2.8.7
 ----------
 
-- fix #1338: use predictable object resolution for monkeypatch'
+- fix #1338: use predictable object resolution for monkeypatch
 
 2.8.6
 -----

_pytest/__init__.py

@@ -1,2 +1,2 @@
 #
-__version__ = '2.8.7.dev1'
+__version__ = '2.8.7'

doc/en/announce/release-2.8.7.rst

@@ -0,0 +1,28 @@
+pytest-2.8.6
+============
+
+pytest is a mature Python testing tool with more than a 1100 tests
+against itself, passing on many different interpreters and platforms.
+This release is supposed to be drop-in compatible to 2.8.5.
+
+See below for the changes and see docs at:
+
+    http://pytest.org
+
+As usual, you can upgrade from pypi via::
+
+    pip install -U pytest
+
+Thanks to all who contributed to this release, among them:
+
+    Ronny Pfannschmidt
+
+
+Happy testing,
+The py.test Development Team
+
+
+2.8.7 (compared to 2.8.6)
+-------------------------
+
+- fix #1338: use predictable object resolution for monkeypatch

doc/en/assert.rst

@@ -26,7 +26,7 @@ you will see the return value of the function call::
 
     $ py.test test_assert1.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -146,7 +146,7 @@ if you run this module::
 
     $ py.test test_assert2.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/cache.rst

@@ -80,7 +80,7 @@ If you then run it with ``--lf``::
 
     $ py.test --lf
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     run-last-failure: rerun last 2 failures
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -121,7 +121,7 @@ of ``FF`` and dots)::
 
     $ py.test --ff
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     run-last-failure: rerun last 2 failures first
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 50 items
@@ -226,7 +226,7 @@ You can always peek at the content of the cache using the
 
     $ py.test --cache-clear
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/capture.rst

@@ -64,7 +64,7 @@ of the failing function and hide the other one::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     

doc/en/doctest.rst

@@ -46,7 +46,7 @@ then you can just invoke ``py.test`` without command line options::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 1 items
     

doc/en/example/markers.rst

@@ -31,7 +31,7 @@ You can then restrict a test run to only run tests marked with ``webtest``::
 
     $ py.test -v -m webtest
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -45,7 +45,7 @@ Or the inverse, running all tests except the webtest ones::
 
     $ py.test -v -m "not webtest"
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -66,7 +66,7 @@ tests based on their module, class, method, or function name::
 
     $ py.test -v test_server.py::TestClass::test_method
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 5 items
@@ -79,7 +79,7 @@ You can also select on the class::
 
     $ py.test -v test_server.py::TestClass
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -92,7 +92,7 @@ Or select multiple nodes::
 
   $ py.test -v test_server.py::TestClass test_server.py::test_send_http
   ======= test session starts ========
-  platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+  platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
   cachedir: .cache
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collecting ... collected 8 items
@@ -130,7 +130,7 @@ select tests based on their names::
 
     $ py.test -v -k http  # running with the above defined example module
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -144,7 +144,7 @@ And you can also run all tests except the ones that match the keyword::
 
     $ py.test -k "not send_http" -v
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -160,7 +160,7 @@ Or to select "http" and "quick" tests::
 
     $ py.test -k "http or quick" -v
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 4 items
@@ -350,7 +350,7 @@ the test needs::
 
     $ py.test -E stage2
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -362,7 +362,7 @@ and here is one that specifies exactly the environment needed::
 
     $ py.test -E stage1
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -481,7 +481,7 @@ then you will see two test skipped and two executed tests as expected::
 
     $ py.test -rs # this option reports skip reasons
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -495,7 +495,7 @@ Note that if you specify a platform via the marker-command line option like this
 
     $ py.test -m linux2
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -547,7 +547,7 @@ We can now use the ``-m option`` to select one set::
 
   $ py.test -m interface --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+  platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
   
@@ -569,7 +569,7 @@ or to select both "event" and "interface" tests::
 
   $ py.test -m "interface or event" --tb=short
   ======= test session starts ========
-  platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+  platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
   rootdir: $REGENDOC_TMPDIR, inifile: 
   collected 4 items
   

doc/en/example/nonpython.rst

@@ -27,7 +27,7 @@ now execute the test specification::
 
     nonpython $ py.test test_simple.yml
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
     
@@ -59,7 +59,7 @@ consulted when reporting in ``verbose`` mode::
 
     nonpython $ py.test -v
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collecting ... collected 2 items
@@ -81,7 +81,7 @@ interesting to just look at the collection tree::
 
     nonpython $ py.test --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/nonpython, inifile: 
     collected 2 items
     <YamlFile 'test_simple.yml'>

doc/en/example/parametrize.rst

@@ -130,7 +130,7 @@ objects, they are still using the default pytest representation::
 
     $ py.test test_time.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 6 items
     <Module 'test_time.py'>
@@ -181,7 +181,7 @@ this is a fully self-contained example which you can run with::
 
     $ py.test test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
@@ -194,7 +194,7 @@ If you just collect tests you'll also nicely see 'advanced' and 'basic' as varia
 
     $ py.test --collect-only test_scenarios.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     <Module 'test_scenarios.py'>
@@ -259,7 +259,7 @@ Let's first see how it looks like at collection time::
 
     $ py.test test_backends.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     <Module 'test_backends.py'>
@@ -320,7 +320,7 @@ The result of this test will be successful::
 
     $ py.test test_indirect_list.py --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     <Module 'test_indirect_list.py'>
@@ -369,7 +369,7 @@ argument sets to use for each test function.  Let's run it::
     $ py.test -q
     F..
     ======= FAILURES ========
-    _______ TestClass.test_equals[2-1] ________
+    _______ TestClass.test_equals[1-2] ________
     
     self = <test_parametrize.TestClass object at 0xdeadbeef>, a = 1, b = 2
     
@@ -397,11 +397,8 @@ is to be run with different sets of arguments for its three arguments:
 Running it results in some skips if we don't have all the python interpreters installed and otherwise runs all combinations (5 interpreters times 5 interpreters times 3 objects to serialize/deserialize)::
 
    . $ py.test -rs -q multipython.py
-   ssssssssssss...ssssssssssss
+   ...........................
-   ======= short test summary info ========
+   27 passed in 0.12 seconds
-   SKIP [12] $REGENDOC_TMPDIR/CWD/multipython.py:22: 'python2.6' not found
-   SKIP [12] $REGENDOC_TMPDIR/CWD/multipython.py:22: 'python3.3' not found
-   3 passed, 24 skipped in 0.12 seconds
 
 Indirect parametrization of optional implementations/imports
 --------------------------------------------------------------------
@@ -448,7 +445,7 @@ If you run this with reporting for skips enabled::
 
     $ py.test -rs test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     

doc/en/example/pythoncollection.rst

@@ -82,7 +82,7 @@ then the test collection looks like this::
 
     $ py.test --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: setup.cfg
     collected 2 items
     <Module 'check_myapp.py'>
@@ -128,7 +128,7 @@ You can always peek at the collection tree without running tests like this::
 
     . $ py.test --collect-only pythoncollection.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 3 items
     <Module 'CWD/pythoncollection.py'>
@@ -182,7 +182,7 @@ interpreters and will leave out the setup.py file::
 
     $ py.test --collect-only
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: pytest.ini
     collected 0 items
     

doc/en/example/reportingdemo.rst

@@ -13,7 +13,7 @@ get on the terminal - we are working on that):
 
     assertion $ py.test failure_demo.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/assertion, inifile: 
     collected 42 items
     

doc/en/example/simple.rst

@@ -108,7 +108,7 @@ directory with the above conftest.py::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
     
@@ -156,7 +156,7 @@ and when running it will see a skipped "slow" test::
 
     $ py.test -rs    # "-rs" means report details on the little 's'
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -170,7 +170,7 @@ Or run it including the ``slow`` marked test::
 
     $ py.test --runslow
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -262,7 +262,7 @@ which will add the string to the test header accordingly::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     project deps: mylib-1.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
@@ -286,7 +286,7 @@ which will add info only when run with "--v"::
 
     $ py.test -v
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     info1: did you know that ...
     did you?
@@ -299,7 +299,7 @@ and nothing when run plainly::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 0 items
     
@@ -332,7 +332,7 @@ Now we can profile which test functions execute the slowest::
 
     $ py.test --durations=3
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     
@@ -394,11 +394,14 @@ If we run this::
 
     $ py.test -rx
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 4 items
     
     test_step.py .Fx.
+    ======= short test summary info ========
+    XFAIL test_step.py::TestUserHandling::()::test_deletion
+      reason: previous test failed (test_modification)
     
     ======= FAILURES ========
     _______ TestUserHandling.test_modification ________
@@ -410,9 +413,6 @@ If we run this::
     E       assert 0
     
     test_step.py:9: AssertionError
-    ======= short test summary info ========
-    XFAIL test_step.py::TestUserHandling::()::test_deletion
-      reason: previous test failed (test_modification)
     ======= 1 failed, 2 passed, 1 xfailed in 0.12 seconds ========
 
 We'll see that ``test_deletion`` was not executed because ``test_modification``
@@ -465,7 +465,7 @@ We can run this::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 7 items
     
@@ -479,7 +479,7 @@ We can run this::
     file $REGENDOC_TMPDIR/b/test_error.py, line 1
       def test_root(db):  # no db here, will error out
             fixture 'db' not found
-            available fixtures: capsys, capfd, pytestconfig, tmpdir_factory, monkeypatch, record_xml_property, cache, tmpdir, recwarn
+            available fixtures: record_xml_property, pytestconfig, cache, capsys, recwarn, monkeypatch, tmpdir, capfd, tmpdir_factory
             use 'py.test --fixtures [testpath]' for help on them.
     
     $REGENDOC_TMPDIR/b/test_error.py:1
@@ -569,7 +569,7 @@ and run them::
 
     $ py.test test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -660,7 +660,7 @@ and run it::
 
     $ py.test -s test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     

doc/en/fixture.rst

@@ -75,7 +75,7 @@ marked ``smtp`` fixture function.  Running the test looks like this::
 
     $ py.test test_smtpsimple.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     
@@ -193,7 +193,7 @@ inspect what is going on and can now run the tests::
 
     $ py.test test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items
     
@@ -480,7 +480,7 @@ Running the above tests results in the following test IDs being used::
 
    $ py.test --collect-only
    ======= test session starts ========
-   platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+   platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
    rootdir: $REGENDOC_TMPDIR, inifile: 
    collected 10 items
    <Module 'test_anothersmtp.py'>
@@ -531,7 +531,7 @@ Here we declare an ``app`` fixture which receives the previously defined
 
     $ py.test -v test_appsetup.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 2 items
@@ -597,7 +597,7 @@ Let's run the tests in verbose mode and with looking at the print-output::
 
     $ py.test -v -s test_module.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1 -- $PYTHON_PREFIX/bin/python3.4
     cachedir: .cache
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collecting ... collected 8 items

doc/en/getting-started.rst

@@ -27,7 +27,7 @@ Installation options::
 To check your installation has installed the correct version::
 
     $ py.test --version
-    This is pytest version 2.8.5, imported from $PYTHON_PREFIX/lib/python3.4/site-packages/pytest.py
+    This is pytest version 2.8.7, imported from $PYTHON_PREFIX/lib/python3.4/site-packages/pytest.py
 
 If you get an error checkout :ref:`installation issues`.
 
@@ -49,7 +49,7 @@ That's it. You can execute the test function now::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/parametrize.rst

@@ -55,7 +55,7 @@ them in turn::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     
@@ -103,7 +103,7 @@ Let's run this::
 
     $ py.test
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 3 items
     

doc/en/skipping.rst

@@ -165,7 +165,7 @@ Running it with the report-on-xfail option gives this output::
 
     example $ py.test -rx xfail_demo.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR/example, inifile: 
     collected 7 items
     

doc/en/tmpdir.rst

@@ -29,7 +29,7 @@ Running this would result in a passed test except for the last
 
     $ py.test test_tmpdir.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 1 items
     

doc/en/unittest.rst

@@ -88,7 +88,7 @@ the ``self.db`` values in the traceback::
 
     $ py.test test_unittest_db.py
     ======= test session starts ========
-    platform linux -- Python 3.4.3, pytest-2.8.5, py-1.4.31, pluggy-0.3.1
+    platform linux -- Python 3.4.3, pytest-2.8.7, py-1.4.31, pluggy-0.3.1
     rootdir: $REGENDOC_TMPDIR, inifile: 
     collected 2 items