Added utest frame using CUnit(http://cunit.sourceforge.net/).

This commit is contained in:
Xianyi Zhang 2011-02-16 17:33:06 +08:00
parent 376677452f
commit fbf95688d6
8 changed files with 261 additions and 1 deletions

View File

@ -7,13 +7,17 @@ ifndef DYNAMIC_ARCH
BLASDIRS += kernel
endif
ifdef UTEST_CHECK
SANITY_CHECK = 1
endif
ifdef SANITY_CHECK
BLASDIRS += reference
endif
SUBDIRS = $(BLASDIRS) lapack
SUBDIRS_ALL = $(SUBDIRS) test ctest exports benchmark ../laswp ../bench
SUBDIRS_ALL = $(SUBDIRS) test ctest utest exports benchmark ../laswp ../bench
.PHONY : all libs netlib test ctest shared
.NOTPARALLEL : all libs prof lapack-test
@ -77,6 +81,9 @@ ifndef CROSS
touch $(LIBNAME)
ifndef NO_FBLAS
$(MAKE) -C test all
ifdef UTEST_CHECK
$(MAKE) -C utest all
endif
endif
ifndef NO_CBLAS
$(MAKE) -C ctest all

View File

@ -84,6 +84,10 @@ VERSION = 0.1
# slow (Not implemented yet).
# SANITY_CHECK = 1
# Run testcases in utest/ . When you enable UTEST_CHECK, it would enable
# SANITY_CHECK to compare the result with reference BLAS.
# UTEST_CHECK = 1
# Common Optimization Flag; -O2 is enough.
COMMON_OPT += -O2

View File

@ -141,6 +141,11 @@ NO_EXPRECISION = 1
endif
endif
ifdef UTEST_CHECK
CCOMMON_OPT += -DUTEST_CHECK
SANITY_CHECK = 1
endif
ifdef SANITY_CHECK
CCOMMON_OPT += -DSANITY_CHECK -DREFNAME=$(*F)f$(BU)
endif

View File

@ -0,0 +1,46 @@
/*****************************************************************************
Copyright (c) 2011, Lab of Parallel Software and Computational Science,ICSAS
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. Neither the name of the ISCAS nor the names of its contributors may
be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************************/
#ifndef ASSEMBLER
#define REF_BU f
#define BLASFUNC_REF_2(x,y) BLASFUNC(x## y)
#define BLASFUNC_REF_1(x,y) BLASFUNC_REF_2(x,y)
#define BLASFUNC_REF(x) BLASFUNC_REF_1(x,REF_BU)
void BLASFUNC_REF(srot) (blasint *, float *, blasint *, float *, blasint *, float *, float *);
void BLASFUNC_REF(drot) (blasint *, double *, blasint *, double *, blasint *, double *, double *);
void BLASFUNC_REF(qrot) (blasint *, xdouble *, blasint *, xdouble *, blasint *, xdouble *, xdouble *);
void BLASFUNC_REF(csrot) (blasint *, float *, blasint *, float *, blasint *, float *, float *);
void BLASFUNC_REF(zdrot) (blasint *, double *, blasint *, double *, blasint *, double *, double *);
void BLASFUNC_REF(xqrot) (blasint *, xdouble *, blasint *, xdouble *, blasint *, xdouble *, xdouble *);
#endif

22
utest/Makefile Normal file
View File

@ -0,0 +1,22 @@
UTEST_CHECK = 1
TOPDIR = ..
include $(TOPDIR)/Makefile.system
TARGET=openblas_utest
CUNIT_LIB=/usr/local/lib/libcunit.a
OBJS=main.o test_rot.o
all : run_test
$(TARGET): $(OBJS)
$(CC) -o $@ $^ ../$(LIBNAME) $(CUNIT_LIB)
run_test: $(TARGET)
./$(TARGET)
clean:
rm -f *.o $(TARGET)
libs:

44
utest/common_utest.h Normal file
View File

@ -0,0 +1,44 @@
/*****************************************************************************
Copyright (c) 2011, Lab of Parallel Software and Computational Science,ICSAS
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. Neither the name of the ISCAS nor the names of its contributors may
be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************************/
#ifndef COMMON_UTEST_H_
#define COMMON_UTEST_H_
#include <CUnit/CUnit.h>
#include <common.h>
#define CHECK_EPS 0.0002
//Testcase list
void test_drot_incx_0(void);
#endif

78
utest/main.c Normal file
View File

@ -0,0 +1,78 @@
/*****************************************************************************
Copyright (c) 2011, Lab of Parallel Software and Computational Science,ICSAS
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. Neither the name of the ISCAS nor the names of its contributors may
be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************************/
#include <stdio.h>
#include <string.h>
#include "common_utest.h"
#include <CUnit/Basic.h>
CU_TestInfo test_level1[]={
{"Testing drot when incx & incy == 0",test_drot_incx_0},
CU_TEST_INFO_NULL,
};
CU_SuiteInfo suites[]={
{"Level1 Test Suite", NULL,NULL,test_level1},
CU_SUITE_INFO_NULL,
};
int main()
{
CU_ErrorCode error;
if (CUE_SUCCESS != CU_initialize_registry())
return CU_get_error();
error=CU_register_suites(suites);
if (error != CUE_SUCCESS) {
perror(CU_get_error_msg());
CU_cleanup_registry();
return CU_get_error();
}
/* Run all tests using the CUnit Basic interface */
CU_basic_set_mode(CU_BRM_VERBOSE);
CU_basic_run_tests();
CU_cleanup_registry();
return CU_get_error();
}

54
utest/test_rot.c Normal file
View File

@ -0,0 +1,54 @@
/*****************************************************************************
Copyright (c) 2011, Lab of Parallel Software and Computational Science,ICSAS
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
3. Neither the name of the ISCAS nor the names of its contributors may
be used to endorse or promote products derived from this software
without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**********************************************************************************/
#include "common_utest.h"
void test_drot_incx_0(void)
{
int i;
int N=4,incX=0,incY=0;
double c=0.25,s=0.5;
double x1[]={1.0,3.0,5.0,7.0};
double y1[]={2.0,4.0,6.0,8.0};
double x2[]={1.0,3.0,5.0,7.0};
double y2[]={2.0,4.0,6.0,8.0};
//OpenBLAS
drot_(&N,x1,&incX,y1,&incY,&c,&s);
//reference
drotf_(&N,x2,&incX,y2,&incY,&c,&s);
for(i=0; i<N; i++){
CU_ASSERT_DOUBLE_EQUAL(x1[i], x2[i], CHECK_EPS);
CU_ASSERT_DOUBLE_EQUAL(y1[i], y2[i], CHECK_EPS);
}
}