developer/xiuos
1
0
Fork 0
forked from xuos/xiuos
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

optimize lwip demo and ok1052-c directories

Browse Source
This commit is contained in:
wlyu
2021-12-30 11:20:36 +08:00
parent 8fa0d977a0
commit 62dcbef383
61 changed files with 1006 additions and 470 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/MIMXRT1052.h
Executable
+42538
View File
File diff suppressed because it is too large Load Diff
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/MIMXRT1052_features.h
Executable
+625
View File
@@ -0,0 +1,625 @@
/*
** ###################################################################
** Version: rev. 1.1, 2018-11-16
** Build: b181120
**
** Abstract:
** Chip specific module features.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2018 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 0.1 (2017-01-10)
** Initial version.
** - rev. 1.0 (2018-09-21)
** Update interrupt vector table and dma request source.
** Update register BEE_ADDR_OFFSET1's bitfield name to ADDR_OFFSET1.
** Split GPIO_COMBINED_IRQS to GPIO_COMBINED_LOW_IRQS and GPIO_COMBINED_HIGH_IRQS.
** - rev. 1.1 (2018-11-16)
** Update feature files to align with IMXRT1050RM Rev.1.
**
** ###################################################################
*/
#ifndef _MIMXRT1052_FEATURES_H_
#define _MIMXRT1052_FEATURES_H_
/* SOC module features */
/* @brief ADC availability on the SoC. */
#define FSL_FEATURE_SOC_ADC_COUNT (2)
/* @brief AIPSTZ availability on the SoC. */
#define FSL_FEATURE_SOC_AIPSTZ_COUNT (4)
/* @brief AOI availability on the SoC. */
#define FSL_FEATURE_SOC_AOI_COUNT (2)
/* @brief CCM availability on the SoC. */
#define FSL_FEATURE_SOC_CCM_COUNT (1)
/* @brief CCM_ANALOG availability on the SoC. */
#define FSL_FEATURE_SOC_CCM_ANALOG_COUNT (1)
/* @brief CMP availability on the SoC. */
#define FSL_FEATURE_SOC_CMP_COUNT (4)
/* @brief CSI availability on the SoC. */
#define FSL_FEATURE_SOC_CSI_COUNT (1)
/* @brief DCDC availability on the SoC. */
#define FSL_FEATURE_SOC_DCDC_COUNT (1)
/* @brief DCP availability on the SoC. */
#define FSL_FEATURE_SOC_DCP_COUNT (1)
/* @brief DMAMUX availability on the SoC. */
#define FSL_FEATURE_SOC_DMAMUX_COUNT (1)
/* @brief EDMA availability on the SoC. */
#define FSL_FEATURE_SOC_EDMA_COUNT (1)
/* @brief ENC availability on the SoC. */
#define FSL_FEATURE_SOC_ENC_COUNT (4)
/* @brief ENET availability on the SoC. */
#define FSL_FEATURE_SOC_ENET_COUNT (1)
/* @brief EWM availability on the SoC. */
#define FSL_FEATURE_SOC_EWM_COUNT (1)
/* @brief FLEXCAN availability on the SoC. */
#define FSL_FEATURE_SOC_FLEXCAN_COUNT (2)
/* @brief FLEXIO availability on the SoC. */
#define FSL_FEATURE_SOC_FLEXIO_COUNT (2)
/* @brief FLEXRAM availability on the SoC. */
#define FSL_FEATURE_SOC_FLEXRAM_COUNT (1)
/* @brief FLEXSPI availability on the SoC. */
#define FSL_FEATURE_SOC_FLEXSPI_COUNT (1)
/* @brief GPC availability on the SoC. */
#define FSL_FEATURE_SOC_GPC_COUNT (1)
/* @brief GPT availability on the SoC. */
#define FSL_FEATURE_SOC_GPT_COUNT (2)
/* @brief I2S availability on the SoC. */
#define FSL_FEATURE_SOC_I2S_COUNT (3)
/* @brief IGPIO availability on the SoC. */
#define FSL_FEATURE_SOC_IGPIO_COUNT (5)
/* @brief IOMUXC availability on the SoC. */
#define FSL_FEATURE_SOC_IOMUXC_COUNT (1)
/* @brief IOMUXC_GPR availability on the SoC. */
#define FSL_FEATURE_SOC_IOMUXC_GPR_COUNT (1)
/* @brief IOMUXC_SNVS availability on the SoC. */
#define FSL_FEATURE_SOC_IOMUXC_SNVS_COUNT (1)
/* @brief KPP availability on the SoC. */
#define FSL_FEATURE_SOC_KPP_COUNT (1)
/* @brief LCDIF availability on the SoC. */
#define FSL_FEATURE_SOC_LCDIF_COUNT (1)
/* @brief LPI2C availability on the SoC. */
#define FSL_FEATURE_SOC_LPI2C_COUNT (4)
/* @brief LPSPI availability on the SoC. */
#define FSL_FEATURE_SOC_LPSPI_COUNT (4)
/* @brief LPUART availability on the SoC. */
#define FSL_FEATURE_SOC_LPUART_COUNT (8)
/* @brief OCOTP availability on the SoC. */
#define FSL_FEATURE_SOC_OCOTP_COUNT (1)
/* @brief PIT availability on the SoC. */
#define FSL_FEATURE_SOC_PIT_COUNT (1)
/* @brief PMU availability on the SoC. */
#define FSL_FEATURE_SOC_PMU_COUNT (1)
/* @brief PWM availability on the SoC. */
#define FSL_FEATURE_SOC_PWM_COUNT (4)
/* @brief PXP availability on the SoC. */
#define FSL_FEATURE_SOC_PXP_COUNT (1)
/* @brief ROMC availability on the SoC. */
#define FSL_FEATURE_SOC_ROMC_COUNT (1)
/* @brief SEMC availability on the SoC. */
#define FSL_FEATURE_SOC_SEMC_COUNT (1)
/* @brief SNVS availability on the SoC. */
#define FSL_FEATURE_SOC_SNVS_COUNT (1)
/* @brief SPDIF availability on the SoC. */
#define FSL_FEATURE_SOC_SPDIF_COUNT (1)
/* @brief SRC availability on the SoC. */
#define FSL_FEATURE_SOC_SRC_COUNT (1)
/* @brief TEMPMON availability on the SoC. */
#define FSL_FEATURE_SOC_TEMPMON_COUNT (1)
/* @brief TMR availability on the SoC. */
#define FSL_FEATURE_SOC_TMR_COUNT (4)
/* @brief TRNG availability on the SoC. */
#define FSL_FEATURE_SOC_TRNG_COUNT (1)
/* @brief TSC availability on the SoC. */
#define FSL_FEATURE_SOC_TSC_COUNT (1)
/* @brief USBHS availability on the SoC. */
#define FSL_FEATURE_SOC_USBHS_COUNT (2)
/* @brief USBNC availability on the SoC. */
#define FSL_FEATURE_SOC_USBNC_COUNT (2)
/* @brief USBPHY availability on the SoC. */
#define FSL_FEATURE_SOC_USBPHY_COUNT (2)
/* @brief USDHC availability on the SoC. */
#define FSL_FEATURE_SOC_USDHC_COUNT (2)
/* @brief WDOG availability on the SoC. */
#define FSL_FEATURE_SOC_WDOG_COUNT (2)
/* @brief XBARA availability on the SoC. */
#define FSL_FEATURE_SOC_XBARA_COUNT (1)
/* @brief XBARB availability on the SoC. */
#define FSL_FEATURE_SOC_XBARB_COUNT (2)
/* @brief XTALOSC24M availability on the SoC. */
#define FSL_FEATURE_SOC_XTALOSC24M_COUNT (1)
/* ADC module features */
/* @brief Remove Hardware Trigger feature. */
#define FSL_FEATURE_ADC_SUPPORT_HARDWARE_TRIGGER_REMOVE (0)
/* @brief Remove ALT Clock selection feature. */
#define FSL_FEATURE_ADC_SUPPORT_ALTCLK_REMOVE (1)
/* ADC_ETC module features */
/* @brief Has DMA model control(bit field CTRL[DMA_MODE_SEL]). */
#define FSL_FEATURE_ADC_ETC_HAS_CTRL_DMA_MODE_SEL (1)
/* AOI module features */
/* @brief Maximum value of input mux. */
#define FSL_FEATURE_AOI_MODULE_INPUTS (4)
/* @brief Number of events related to number of registers AOIx_BFCRT01n/AOIx_BFCRT23n. */
#define FSL_FEATURE_AOI_EVENT_COUNT (4)
/* FLEXCAN module features */
/* @brief Message buffer size */
#define FSL_FEATURE_FLEXCAN_HAS_MESSAGE_BUFFER_MAX_NUMBERn(x) (64)
/* @brief Has doze mode support (register bit field MCR[DOZE]). */
#define FSL_FEATURE_FLEXCAN_HAS_DOZE_MODE_SUPPORT (0)
/* @brief Insatnce has doze mode support (register bit field MCR[DOZE]). */
#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_DOZE_MODE_SUPPORTn(x) (0)
/* @brief Has a glitch filter on the receive pin (register bit field MCR[WAKSRC]). */
#define FSL_FEATURE_FLEXCAN_HAS_GLITCH_FILTER (1)
/* @brief Has extended interrupt mask and flag register (register IMASK2, IFLAG2). */
#define FSL_FEATURE_FLEXCAN_HAS_EXTENDED_FLAG_REGISTER (1)
/* @brief Instance has extended bit timing register (register CBT). */
#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_EXTENDED_TIMING_REGISTERn(x) (0)
/* @brief Has a receive FIFO DMA feature (register bit field MCR[DMA]). */
#define FSL_FEATURE_FLEXCAN_HAS_RX_FIFO_DMA (0)
/* @brief Instance has a receive FIFO DMA feature (register bit field MCR[DMA]). */
#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_RX_FIFO_DMAn(x) (0)
/* @brief Remove CAN Engine Clock Source Selection from unsupported part. */
#define FSL_FEATURE_FLEXCAN_SUPPORT_ENGINE_CLK_SEL_REMOVE (1)
/* @brief Instance remove CAN Engine Clock Source Selection from unsupported part. */
#define FSL_FEATURE_FLEXCAN_INSTANCE_SUPPORT_ENGINE_CLK_SEL_REMOVEn(x) (1)
/* @brief Is affected by errata with ID 5641 (Module does not transmit a message that is enabled to be transmitted at a specific moment during the arbitration process). */
#define FSL_FEATURE_FLEXCAN_HAS_ERRATA_5641 (0)
/* @brief Is affected by errata with ID 5829 (FlexCAN: FlexCAN does not transmit a message that is enabled to be transmitted in a specific moment during the arbitration process). */
#define FSL_FEATURE_FLEXCAN_HAS_ERRATA_5829 (1)
/* @brief Is affected by errata with ID 6032 (FlexCAN: A frame with wrong ID or payload is transmitted into the CAN bus when the Message Buffer under transmission is either aborted or deactivated while the CAN bus is in the Bus Idle state). */
#define FSL_FEATURE_FLEXCAN_HAS_ERRATA_6032 (1)
/* @brief Is affected by errata with ID 9595 (FlexCAN: Corrupt frame possible if the Freeze Mode or the Low-Power Mode are entered during a Bus-Off state). */
#define FSL_FEATURE_FLEXCAN_HAS_ERRATA_9595 (1)
/* @brief Has CAN with Flexible Data rate (CAN FD) protocol. */
#define FSL_FEATURE_FLEXCAN_HAS_FLEXIBLE_DATA_RATE (0)
/* @brief CAN instance support Flexible Data rate (CAN FD) protocol. */
#define FSL_FEATURE_FLEXCAN_INSTANCE_HAS_FLEXIBLE_DATA_RATEn(x) (0)
/* @brief Has extra MB interrupt or common one. */
#define FSL_FEATURE_FLEXCAN_HAS_EXTRA_MB_INT (1)
/* CMP module features */
/* @brief Has Trigger mode in CMP (register bit field CR1[TRIGM]). */
#define FSL_FEATURE_CMP_HAS_TRIGGER_MODE (0)
/* @brief Has Window mode in CMP (register bit field CR1[WE]). */
#define FSL_FEATURE_CMP_HAS_WINDOW_MODE (1)
/* @brief Has External sample supported in CMP (register bit field CR1[SE]). */
#define FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT (1)
/* @brief Has DMA support in CMP (register bit field SCR[DMAEN]). */
#define FSL_FEATURE_CMP_HAS_DMA (1)
/* @brief Has Pass Through mode in CMP (register bit field MUXCR[PSTM]). */
#define FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE (0)
/* @brief Has DAC Test function in CMP (register DACTEST). */
#define FSL_FEATURE_CMP_HAS_DAC_TEST (0)
/* EDMA module features */
/* @brief Number of DMA channels (related to number of registers TCD, DCHPRI, bit fields ERQ[ERQn], EEI[EEIn], INT[INTn], ERR[ERRn], HRS[HRSn] and bit field widths ES[ERRCHN], CEEI[CEEI], SEEI[SEEI], CERQ[CERQ], SERQ[SERQ], CDNE[CDNE], SSRT[SSRT], CERR[CERR], CINT[CINT], TCDn_CITER_ELINKYES[LINKCH], TCDn_CSR[MAJORLINKCH], TCDn_BITER_ELINKYES[LINKCH]). (Valid only for eDMA modules.) */
#define FSL_FEATURE_EDMA_MODULE_CHANNEL (32)
/* @brief Total number of DMA channels on all modules. */
#define FSL_FEATURE_EDMA_DMAMUX_CHANNELS (32)
/* @brief Number of DMA channel groups (register bit fields CR[ERGA], CR[GRPnPRI], ES[GPE], DCHPRIn[GRPPRI]). (Valid only for eDMA modules.) */
#define FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT (1)
/* @brief Has DMA_Error interrupt vector. */
#define FSL_FEATURE_EDMA_HAS_ERROR_IRQ (1)
/* @brief Number of DMA channels with asynchronous request capability (register EARS). (Valid only for eDMA modules.) */
#define FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT (32)
/* DMAMUX module features */
/* @brief Number of DMA channels (related to number of register CHCFGn). */
#define FSL_FEATURE_DMAMUX_MODULE_CHANNEL (32)
/* @brief Total number of DMA channels on all modules. */
#define FSL_FEATURE_DMAMUX_DMAMUX_CHANNELS (FSL_FEATURE_SOC_DMAMUX_COUNT * 32)
/* @brief Has the periodic trigger capability for the triggered DMA channel (register bit CHCFG0[TRIG]). */
#define FSL_FEATURE_DMAMUX_HAS_TRIG (1)
/* @brief Has DMA Channel Always ON function (register bit CHCFG0[A_ON]). */
#define FSL_FEATURE_DMAMUX_HAS_A_ON (1)
/* ENET module features */
/* @brief Support Interrupt Coalesce */
#define FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE (1)
/* @brief Queue Size. */
#define FSL_FEATURE_ENET_QUEUE (1)
/* @brief Has AVB Support. */
#define FSL_FEATURE_ENET_HAS_AVB (0)
/* @brief Has Timer Pulse Width control. */
#define FSL_FEATURE_ENET_HAS_TIMER_PWCONTROL (1)
/* @brief Has Extend MDIO Support. */
#define FSL_FEATURE_ENET_HAS_EXTEND_MDIO (1)
/* @brief Has Additional 1588 Timer Channel Interrupt. */
#define FSL_FEATURE_ENET_HAS_ADD_1588_TIMER_CHN_INT (0)
/* EWM module features */
/* @brief Has clock select (register CLKCTRL). */
#define FSL_FEATURE_EWM_HAS_CLOCK_SELECT (1)
/* @brief Has clock prescaler (register CLKPRESCALER). */
#define FSL_FEATURE_EWM_HAS_PRESCALER (1)
/* FLEXIO module features */
/* @brief Has Shifter Status Register (FLEXIO_SHIFTSTAT) */
#define FSL_FEATURE_FLEXIO_HAS_SHIFTER_STATUS (1)
/* @brief Has Pin Data Input Register (FLEXIO_PIN) */
#define FSL_FEATURE_FLEXIO_HAS_PIN_STATUS (1)
/* @brief Has Shifter Buffer N Nibble Byte Swapped Register (FLEXIO_SHIFTBUFNBSn) */
#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_BYTE_SWAP (1)
/* @brief Has Shifter Buffer N Half Word Swapped Register (FLEXIO_SHIFTBUFHWSn) */
#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_HALF_WORD_SWAP (1)
/* @brief Has Shifter Buffer N Nibble Swapped Register (FLEXIO_SHIFTBUFNISn) */
#define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_SWAP (1)
/* @brief Supports Shifter State Mode (FLEXIO_SHIFTCTLn[SMOD]) */
#define FSL_FEATURE_FLEXIO_HAS_STATE_MODE (1)
/* @brief Supports Shifter Logic Mode (FLEXIO_SHIFTCTLn[SMOD]) */
#define FSL_FEATURE_FLEXIO_HAS_LOGIC_MODE (1)
/* @brief Supports paralle width (FLEXIO_SHIFTCFGn[PWIDTH]) */
#define FSL_FEATURE_FLEXIO_HAS_PARALLEL_WIDTH (1)
/* @brief Reset value of the FLEXIO_VERID register */
#define FSL_FEATURE_FLEXIO_VERID_RESET_VALUE (0x1010001)
/* @brief Reset value of the FLEXIO_PARAM register */
#define FSL_FEATURE_FLEXIO_PARAM_RESET_VALUE (0x2200404)
/* FLEXRAM module features */
/* @brief Bank size */
#define FSL_FEATURE_FLEXRAM_INTERNAL_RAM_BANK_SIZE (32768)
/* @brief Total Bank numbers */
#define FSL_FEATURE_FLEXRAM_INTERNAL_RAM_TOTAL_BANK_NUMBERS (16)
/* FLEXSPI module features */
/* @brief FlexSPI AHB buffer count */
#define FSL_FEATURE_FLEXSPI_AHB_BUFFER_COUNTn(x) (4)
/* @brief FlexSPI has no data learn. */
#define FSL_FEATURE_FLEXSPI_HAS_NO_DATA_LEARN (1)
/* GPC module features */
/* @brief Has DVFS0 Change Request. */
#define FSL_FEATURE_GPC_HAS_CNTR_DVFS0CR (0)
/* @brief Has GPC interrupt/event masking. */
#define FSL_FEATURE_GPC_HAS_CNTR_GPCIRQM (0)
/* @brief Has L2 cache power control. */
#define FSL_FEATURE_GPC_HAS_CNTR_L2PGE (0)
/* @brief Has FLEXRAM PDRAM0(bank1-7) power control. */
#define FSL_FEATURE_GPC_HAS_CNTR_PDRAM0PGE (1)
/* @brief Has VADC power control. */
#define FSL_FEATURE_GPC_HAS_CNTR_VADC (0)
/* @brief Has Display power control. */
#define FSL_FEATURE_GPC_HAS_CNTR_DISPLAY (0)
/* @brief Supports IRQ 0-31. */
#define FSL_FEATURE_GPC_HAS_IRQ_0_31 (1)
/* IGPIO module features */
/* @brief Has data register set DR_SET. */
#define FSL_FEATURE_IGPIO_HAS_DR_SET (1)
/* @brief Has data register clear DR_CLEAR. */
#define FSL_FEATURE_IGPIO_HAS_DR_CLEAR (1)
/* @brief Has data register toggle DR_TOGGLE. */
#define FSL_FEATURE_IGPIO_HAS_DR_TOGGLE (1)
/* LCDIF module features */
/* @brief LCDIF does not support alpha support. */
#define FSL_FEATURE_LCDIF_HAS_NO_AS (1)
/* @brief LCDIF does not support output reset pin to LCD panel. */
#define FSL_FEATURE_LCDIF_HAS_NO_RESET_PIN (1)
/* @brief LCDIF supports LUT. */
#define FSL_FEATURE_LCDIF_HAS_LUT (1)
/* LPI2C module features */
/* @brief Has separate DMA RX and TX requests. */
#define FSL_FEATURE_LPI2C_HAS_SEPARATE_DMA_RX_TX_REQn(x) (0)
/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
#define FSL_FEATURE_LPI2C_FIFO_SIZEn(x) (4)
/* LPSPI module features */
/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
#define FSL_FEATURE_LPSPI_FIFO_SIZEn(x) (16)
/* @brief Has separate DMA RX and TX requests. */
#define FSL_FEATURE_LPSPI_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
/* LPUART module features */
/* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */
#define FSL_FEATURE_LPUART_HAS_IRQ_EXTENDED_FUNCTIONS (0)
/* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */
#define FSL_FEATURE_LPUART_HAS_LOW_POWER_UART_SUPPORT (1)
/* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */
#define FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS (1)
/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
#define FSL_FEATURE_LPUART_HAS_FIFO (1)
/* @brief Has 32-bit register MODIR */
#define FSL_FEATURE_LPUART_HAS_MODIR (1)
/* @brief Hardware flow control (RTS, CTS) is supported. */
#define FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT (1)
/* @brief Infrared (modulation) is supported. */
#define FSL_FEATURE_LPUART_HAS_IR_SUPPORT (1)
/* @brief 2 bits long stop bit is available. */
#define FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT (1)
/* @brief If 10-bit mode is supported. */
#define FSL_FEATURE_LPUART_HAS_10BIT_DATA_SUPPORT (1)
/* @brief If 7-bit mode is supported. */
#define FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT (1)
/* @brief Baud rate fine adjustment is available. */
#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (0)
/* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */
#define FSL_FEATURE_LPUART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (1)
/* @brief Baud rate oversampling is available. */
#define FSL_FEATURE_LPUART_HAS_RX_RESYNC_SUPPORT (1)
/* @brief Baud rate oversampling is available. */
#define FSL_FEATURE_LPUART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (1)
/* @brief Peripheral type. */
#define FSL_FEATURE_LPUART_IS_SCI (1)
/* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */
#define FSL_FEATURE_LPUART_FIFO_SIZEn(x) (4)
/* @brief Maximal data width without parity bit. */
#define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_NO_PARITY (10)
/* @brief Maximal data width with parity bit. */
#define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_PARITY (9)
/* @brief Supports two match addresses to filter incoming frames. */
#define FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING (1)
/* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */
#define FSL_FEATURE_LPUART_HAS_DMA_ENABLE (1)
/* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */
#define FSL_FEATURE_LPUART_HAS_DMA_SELECT (0)
/* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */
#define FSL_FEATURE_LPUART_HAS_BIT_ORDER_SELECT (1)
/* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */
#define FSL_FEATURE_LPUART_HAS_SMART_CARD_SUPPORT (0)
/* @brief Has improved smart card (ISO7816 protocol) support. */
#define FSL_FEATURE_LPUART_HAS_IMPROVED_SMART_CARD_SUPPORT (0)
/* @brief Has local operation network (CEA709.1-B protocol) support. */
#define FSL_FEATURE_LPUART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0)
/* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */
#define FSL_FEATURE_LPUART_HAS_32BIT_REGISTERS (1)
/* @brief Lin break detect available (has bit BAUD[LBKDIE]). */
#define FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT (1)
/* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */
#define FSL_FEATURE_LPUART_HAS_WAIT_MODE_OPERATION (0)
/* @brief Has separate DMA RX and TX requests. */
#define FSL_FEATURE_LPUART_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1)
/* @brief Has separate RX and TX interrupts. */
#define FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (0)
/* @brief Has LPAURT_PARAM. */
#define FSL_FEATURE_LPUART_HAS_PARAM (1)
/* @brief Has LPUART_VERID. */
#define FSL_FEATURE_LPUART_HAS_VERID (1)
/* @brief Has LPUART_GLOBAL. */
#define FSL_FEATURE_LPUART_HAS_GLOBAL (1)
/* @brief Has LPUART_PINCFG. */
#define FSL_FEATURE_LPUART_HAS_PINCFG (1)
/* interrupt module features */
/* @brief Lowest interrupt request number. */
#define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14)
/* @brief Highest interrupt request number. */
#define FSL_FEATURE_INTERRUPT_IRQ_MAX (151)
/* OCOTP module features */
/* No feature definitions */
/* PIT module features */
/* @brief Number of channels (related to number of registers LDVALn, CVALn, TCTRLn, TFLGn). */
#define FSL_FEATURE_PIT_TIMER_COUNT (4)
/* @brief Has lifetime timer (related to existence of registers LTMR64L and LTMR64H). */
#define FSL_FEATURE_PIT_HAS_LIFETIME_TIMER (1)
/* @brief Has chain mode (related to existence of register bit field TCTRLn[CHN]). */
#define FSL_FEATURE_PIT_HAS_CHAIN_MODE (1)
/* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */
#define FSL_FEATURE_PIT_HAS_SHARED_IRQ_HANDLER (1)
/* @brief Has timer enable control. */
#define FSL_FEATURE_PIT_HAS_MDIS (1)
/* PMU module features */
/* @brief PMU supports lower power control. */
#define FSL_FEATURE_PMU_HAS_LOWPWR_CTRL (0)
/* PWM module features */
/* @brief Number of each EflexPWM module channels (outputs). */
#define FSL_FEATURE_PWM_CHANNEL_COUNT (12U)
/* @brief Number of EflexPWM module A channels (outputs). */
#define FSL_FEATURE_PWM_CHANNELA_COUNT (4U)
/* @brief Number of EflexPWM module B channels (outputs). */
#define FSL_FEATURE_PWM_CHANNELB_COUNT (4U)
/* @brief Number of EflexPWM module X channels (outputs). */
#define FSL_FEATURE_PWM_CHANNELX_COUNT (4U)
/* @brief Number of each EflexPWM module compare channels interrupts. */
#define FSL_FEATURE_PWM_CMP_INT_HANDLER_COUNT (4U)
/* @brief Number of each EflexPWM module reload channels interrupts. */
#define FSL_FEATURE_PWM_RELOAD_INT_HANDLER_COUNT (4U)
/* @brief Number of each EflexPWM module capture channels interrupts. */
#define FSL_FEATURE_PWM_CAP_INT_HANDLER_COUNT (1U)
/* @brief Number of each EflexPWM module reload error channels interrupts. */
#define FSL_FEATURE_PWM_RERR_INT_HANDLER_COUNT (1U)
/* @brief Number of each EflexPWM module fault channels interrupts. */
#define FSL_FEATURE_PWM_FAULT_INT_HANDLER_COUNT (1U)
/* @brief Number of submodules in each EflexPWM module. */
#define FSL_FEATURE_PWM_SUBMODULE_COUNT (4U)
/* PXP module features */
/* @brief PXP module has dither engine. */
#define FSL_FEATURE_PXP_HAS_DITHER (0)
/* @brief PXP module supports repeat run */
#define FSL_FEATURE_PXP_HAS_EN_REPEAT (1)
/* @brief PXP doesn't have CSC */
#define FSL_FEATURE_PXP_HAS_NO_CSC2 (1)
/* @brief PXP doesn't have LUT */
#define FSL_FEATURE_PXP_HAS_NO_LUT (1)
/* RTWDOG module features */
/* @brief Watchdog is available. */
#define FSL_FEATURE_RTWDOG_HAS_WATCHDOG (1)
/* @brief RTWDOG_CNT can be 32-bit written. */
#define FSL_FEATURE_RTWDOG_HAS_32BIT_ACCESS (1)
/* SAI module features */
/* @brief Receive/transmit FIFO size in item count (register bit fields TCSR[FRDE], TCSR[FRIE], TCSR[FRF], TCR1[TFW], RCSR[FRDE], RCSR[FRIE], RCSR[FRF], RCR1[RFW], registers TFRn, RFRn). */
#define FSL_FEATURE_SAI_FIFO_COUNT (32)
/* @brief Receive/transmit channel number (register bit fields TCR3[TCE], RCR3[RCE], registers TDRn and RDRn). */
#define FSL_FEATURE_SAI_CHANNEL_COUNT (4)
/* @brief Maximum words per frame (register bit fields TCR3[WDFL], TCR4[FRSZ], TMR[TWM], RCR3[WDFL], RCR4[FRSZ], RMR[RWM]). */
#define FSL_FEATURE_SAI_MAX_WORDS_PER_FRAME (32)
/* @brief Has support of combining multiple data channel FIFOs into single channel FIFO (register bit fields TCR3[CFR], TCR4[FCOMB], TFR0[WCP], TFR1[WCP], RCR3[CFR], RCR4[FCOMB], RFR0[RCP], RFR1[RCP]). */
#define FSL_FEATURE_SAI_HAS_FIFO_COMBINE_MODE (1)
/* @brief Has packing of 8-bit and 16-bit data into each 32-bit FIFO word (register bit fields TCR4[FPACK], RCR4[FPACK]). */
#define FSL_FEATURE_SAI_HAS_FIFO_PACKING (1)
/* @brief Configures when the SAI will continue transmitting after a FIFO error has been detected (register bit fields TCR4[FCONT], RCR4[FCONT]). */
#define FSL_FEATURE_SAI_HAS_FIFO_FUNCTION_AFTER_ERROR (1)
/* @brief Configures if the frame sync is generated internally, a frame sync is only generated when the FIFO warning flag is clear or continuously (register bit fields TCR4[ONDEM], RCR4[ONDEM]). */
#define FSL_FEATURE_SAI_HAS_ON_DEMAND_MODE (1)
/* @brief Simplified bit clock source and asynchronous/synchronous mode selection (register bit fields TCR2[CLKMODE], RCR2[CLKMODE]), in comparison with the exclusively implemented TCR2[SYNC,BCS,BCI,MSEL], RCR2[SYNC,BCS,BCI,MSEL]. */
#define FSL_FEATURE_SAI_HAS_CLOCKING_MODE (0)
/* @brief Has register for configuration of the MCLK divide ratio (register bit fields MDR[FRACT], MDR[DIVIDE]). */
#define FSL_FEATURE_SAI_HAS_MCLKDIV_REGISTER (0)
/* @brief Interrupt source number */
#define FSL_FEATURE_SAI_INT_SOURCE_NUM (2)
/* @brief Has register of MCR. */
#define FSL_FEATURE_SAI_HAS_MCR (0)
/* @brief Has bit field MICS of the MCR register. */
#define FSL_FEATURE_SAI_HAS_NO_MCR_MICS (1)
/* @brief Has register of MDR */
#define FSL_FEATURE_SAI_HAS_MDR (0)
/* @brief Has support the BCLK bypass mode when BCLK = MCLK. */
#define FSL_FEATURE_SAI_HAS_BCLK_BYPASS (0)
/* SEMC module features */
/* @brief Has WDH time in NOR controller (register bit field NORCR2[WDH]). */
#define FSL_FEATURE_SEMC_HAS_NOR_WDH_TIME (1)
/* @brief Has WDS time in NOR controller (register bit field NORCR2[WDS]).) */
#define FSL_FEATURE_SEMC_HAS_NOR_WDS_TIME (1)
/* SNVS module features */
/* @brief Has Secure Real Time Counter Enabled and Valid (bit field LPCR[SRTC_ENV]). */
#define FSL_FEATURE_SNVS_HAS_SRTC (1)
/* SRC module features */
/* @brief There is MASK_WDOG3_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_MASK_WDOG3_RST (1)
/* @brief There is MIX_RST_STRCH bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_MIX_RST_STRCH (0)
/* @brief There is DBG_RST_MSK_PG bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_DBG_RST_MSK_PG (1)
/* @brief There is WDOG3_RST_OPTN bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_WDOG3_RST_OPTN (0)
/* @brief There is CORES_DBG_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_CORES_DBG_RST (0)
/* @brief There is MTSR bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_MTSR (0)
/* @brief There is CORE0_DBG_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_CORE0_DBG_RST (1)
/* @brief There is CORE0_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_CORE0_RST (1)
/* @brief There is LOCKUP_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_LOCKUP_RST (0)
/* @brief There is SWRC bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_SWRC (0)
/* @brief There is EIM_RST bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_EIM_RST (0)
/* @brief There is LUEN bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_SCR_LUEN (0)
/* @brief There is no WRBC bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_NO_SCR_WRBC (1)
/* @brief There is no WRE bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_NO_SCR_WRE (1)
/* @brief There is SISR register. */
#define FSL_FEATURE_SRC_HAS_SISR (0)
/* @brief There is RESET_OUT bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_RESET_OUT (0)
/* @brief There is WDOG3_RST_B bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_WDOG3_RST_B (1)
/* @brief There is SW bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_SW (0)
/* @brief There is IPP_USER_RESET_B bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_IPP_USER_RESET_B (1)
/* @brief There is SNVS bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_SNVS (0)
/* @brief There is CSU_RESET_B bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_CSU_RESET_B (1)
/* @brief There is LOCKUP bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_LOCKUP (0)
/* @brief There is LOCKUP_SYSRESETREQ bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_LOCKUP_SYSRESETREQ (1)
/* @brief There is POR bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_POR (0)
/* @brief There is IPP_RESET_B bit in SRSR register. */
#define FSL_FEATURE_SRC_HAS_SRSR_IPP_RESET_B (1)
/* @brief There is no WBI bit in SCR register. */
#define FSL_FEATURE_SRC_HAS_NO_SRSR_WBI (1)
/* SCB module features */
/* @brief L1 ICACHE line size in byte. */
#define FSL_FEATURE_L1ICACHE_LINESIZE_BYTE (32)
/* @brief L1 DCACHE line size in byte. */
#define FSL_FEATURE_L1DCACHE_LINESIZE_BYTE (32)
/* TRNG module features */
/* @brief TRNG has no TRNG_ACC bitfield. */
#define FSL_FEATURE_TRNG_HAS_NO_TRNG_ACC (1)
/* USBHS module features */
/* @brief EHCI module instance count */
#define FSL_FEATURE_USBHS_EHCI_COUNT (2)
/* @brief Number of endpoints supported */
#define FSL_FEATURE_USBHS_ENDPT_COUNT (8)
/* USDHC module features */
/* @brief Has external DMA support (VEND_SPEC[EXT_DMA_EN]) */
#define FSL_FEATURE_USDHC_HAS_EXT_DMA (0)
/* @brief Has HS400 mode (MIX_CTRL[HS400_MODE]) */
#define FSL_FEATURE_USDHC_HAS_HS400_MODE (0)
/* @brief Has SDR50 support (HOST_CTRL_CAP[SDR50_SUPPORT]) */
#define FSL_FEATURE_USDHC_HAS_SDR50_MODE (1)
/* @brief Has SDR104 support (HOST_CTRL_CAP[SDR104_SUPPORT]) */
#define FSL_FEATURE_USDHC_HAS_SDR104_MODE (1)
/* XBARA module features */
/* @brief DMA_CH_MUX_REQ_30. */
#define FSL_FEATURE_XBARA_OUTPUT_DMA_CH_MUX_REQ_30 (1)
/* @brief DMA_CH_MUX_REQ_31. */
#define FSL_FEATURE_XBARA_OUTPUT_DMA_CH_MUX_REQ_31 (1)
/* @brief DMA_CH_MUX_REQ_94. */
#define FSL_FEATURE_XBARA_OUTPUT_DMA_CH_MUX_REQ_94 (1)
/* @brief DMA_CH_MUX_REQ_95. */
#define FSL_FEATURE_XBARA_OUTPUT_DMA_CH_MUX_REQ_95 (1)
#endif /* _MIMXRT1052_FEATURES_H_ */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/enet_ethernetif.h
Executable
+202
View File
@@ -0,0 +1,202 @@
/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
/*
* Copyright (c) 2013-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2021 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file enet_ethernetif.h
* @brief ethernet drivers
* @version 1.0
* @author AIIT XUOS Lab
* @date 2021.11.11
*/
#ifndef ENET_ETHERNETIF_H
#define ENET_ETHERNETIF_H
#include "lwip/err.h"
#include "lwip/netif.h"
#include "fsl_enet.h"
/*******************************************************************************
* Definitions
******************************************************************************/
#ifndef ENET_RXBD_NUM
#define ENET_RXBD_NUM (5)
#endif
#ifndef ENET_TXBD_NUM
#if defined(FSL_FEATURE_SOC_LPC_ENET_COUNT) && (FSL_FEATURE_SOC_LPC_ENET_COUNT > 0)
#define ENET_TXBD_NUM (5)
#else
#define ENET_TXBD_NUM (3)
#endif
#endif
#ifndef ENET_RXBUFF_SIZE
#if defined(FSL_FEATURE_SOC_LPC_ENET_COUNT) && (FSL_FEATURE_SOC_LPC_ENET_COUNT > 0)
#define ENET_RXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN + ETH_PAD_SIZE)
#else
#define ENET_RXBUFF_SIZE ENET_FRAME_MAX_FRAMELEN
#endif
#endif
#ifndef ENET_TXBUFF_SIZE
#define ENET_TXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN)
#endif
#define ENET_TIMEOUT (0xFFFU)
/* ENET IRQ priority. Used in FreeRTOS. */
/* Interrupt priorities. */
#ifdef __CA7_REV
#ifndef ENET_PRIORITY
#define ENET_PRIORITY (21U)
#endif
#ifndef ENET_1588_PRIORITY
#define ENET_1588_PRIORITY (20U)
#endif
#else
#ifndef ENET_PRIORITY
#define ENET_PRIORITY (15U)//(6U)
#endif
#ifndef ENET_1588_PRIORITY
#define ENET_1588_PRIORITY (5U)
#endif
#endif
/* Defines Ethernet Autonegotiation Timeout during initialization.
* Set it to 0 to disable the waiting. */
#ifndef ENET_ATONEGOTIATION_TIMEOUT
#define ENET_ATONEGOTIATION_TIMEOUT (0xFFFU)
#endif
/* Define those to better describe your network interface. */
#define IFNAME0 'e'
#define IFNAME1 'n'
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
#if defined(FSL_FEATURE_L2CACHE_LINESIZE_BYTE) \
&& ((!defined(FSL_SDK_DISBLE_L2CACHE_PRESENT)) || (FSL_SDK_DISBLE_L2CACHE_PRESENT == 0))
#if defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define FSL_CACHE_LINESIZE_MAX MAX(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE, FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#define FSL_ENET_BUFF_ALIGNMENT MAX(ENET_BUFF_ALIGNMENT, FSL_CACHE_LINESIZE_MAX)
#else
#define FSL_ENET_BUFF_ALIGNMENT MAX(ENET_BUFF_ALIGNMENT, FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#endif
#elif defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define FSL_ENET_BUFF_ALIGNMENT MAX(ENET_BUFF_ALIGNMENT, FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#else
#define FSL_ENET_BUFF_ALIGNMENT ENET_BUFF_ALIGNMENT
#endif
#else
#define FSL_ENET_BUFF_ALIGNMENT ENET_BUFF_ALIGNMENT
#endif
#define ENET_RING_NUM 1U
typedef uint8_t rx_buffer_t[SDK_SIZEALIGN(ENET_RXBUFF_SIZE, FSL_ENET_BUFF_ALIGNMENT)];
typedef uint8_t tx_buffer_t[SDK_SIZEALIGN(ENET_TXBUFF_SIZE, FSL_ENET_BUFF_ALIGNMENT)];
#if (defined(FSL_FEATURE_SOC_LPC_ENET_COUNT) && (FSL_FEATURE_SOC_LPC_ENET_COUNT > 0))
typedef struct mem_range
{
uint32_t start;
uint32_t end;
} mem_range_t;
#endif /* FSL_FEATURE_SOC_LPC_ENET_COUNT */
/**
* Helper struct to hold data for configuration of ethernet interface.
*/
typedef struct ethernetif_config
{
uint32_t phyAddress;
clock_name_t clockName;
uint8_t macAddress[NETIF_MAX_HWADDR_LEN];
#if (defined(FSL_FEATURE_SOC_LPC_ENET_COUNT) && (FSL_FEATURE_SOC_LPC_ENET_COUNT > 0))
const mem_range_t *non_dma_memory;
#endif /* FSL_FEATURE_SOC_LPC_ENET_COUNT */
} ethernetif_config_t;
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/**
* This function should be passed as a parameter to netif_add()
* if you initialize the first ENET interface.
*/
err_t ethernetif0_init(struct netif *netif);
#if (defined(FSL_FEATURE_SOC_ENET_COUNT) && (FSL_FEATURE_SOC_ENET_COUNT > 1)) \
|| (defined(FSL_FEATURE_SOC_LPC_ENET_COUNT) && (FSL_FEATURE_SOC_LPC_ENET_COUNT > 1))
/**
* This function should be passed as a parameter to netif_add()
* if you initialize the second ENET interface.
*/
err_t ethernetif1_init(struct netif *netif);
#endif /* FSL_FEATURE_SOC_*_ENET_COUNT */
/**
* This function should be called when a packet is ready to be read
* from the interface.
* It is used by bare-metal applications.
*
* @param netif the lwip network interface structure for this ethernetif
*/
void ethernetif_input( struct netif *netif);
void ETH_BSP_Config(void);
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* ENET_ETHERNETIF_H */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/enet_ethernetif_priv.h
Executable
+94
View File
@@ -0,0 +1,94 @@
/*
* Copyright 2019 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2021 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file enet_ethernetif_priv.h
* @brief ethernet drivers
* @version 1.0
* @author AIIT XUOS Lab
* @date 2021.11.11
*/
#ifndef ENET_ETHERNETIF_PRIV_H
#define ENET_ETHERNETIF_PRIV_H
#include "lwip/err.h"
struct ethernetif;
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
err_t ethernetif_init(struct netif *netif, struct ethernetif *ethernetif,
const uint8_t enetIdx,
const ethernetif_config_t *ethernetifConfig);
void ethernetif_enet_init(struct netif *netif, struct ethernetif *ethernetif,
const ethernetif_config_t *ethernetifConfig);
void ethernetif_phy_init(struct ethernetif *ethernetif,
const ethernetif_config_t *ethernetifConfig,
enet_config_t *config);
ENET_Type **ethernetif_enet_ptr(struct ethernetif *ethernetif);
#if LWIP_IPV4 && LWIP_IGMP
err_t ethernetif_igmp_mac_filter(struct netif *netif, const ip4_addr_t *group,
enum netif_mac_filter_action action);
#endif
#if LWIP_IPV6 && LWIP_IPV6_MLD
err_t ethernetif_mld_mac_filter(struct netif *netif, const ip6_addr_t *group,
enum netif_mac_filter_action action);
#endif
/**
* Should allocate a pbuf and transfer the bytes of the incoming
* packet from the interface into the pbuf.
*
* @param netif the lwip network interface structure for this ethernetif
* @return a pbuf filled with the received packet (including MAC header)
* NULL on memory error
*/
struct pbuf *ethernetif_linkinput(struct netif *netif);
/**
* This function should do the actual transmission of the packet. The packet is
* contained in the pbuf that is passed to the function. This pbuf
* might be chained.
*
* @param netif the lwip network interface structure for this ethernetif
* @param p the MAC packet to send (e.g. IP packet including MAC addresses and type)
* @return ERR_OK if the packet could be sent
* an err_t value if the packet couldn't be sent
*
* @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
* strange results. You might consider waiting for space in the DMA queue
* to become available since the stack doesn't retry to send a packet
* dropped because of memory failure (except for the TCP timers).
*/
err_t ethernetif_linkoutput(struct netif *netif, struct pbuf *p);
#if defined(__cplusplus)
}
#endif /* __cplusplus */
#endif /* ENET_ETHERNETIF_PRIV_H */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_cache.h
Executable
+488
View File
@@ -0,0 +1,488 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2021 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file fsl_cache.h
* @brief cache drivers
* @version 1.0
* @author AIIT XUOS Lab
* @date 2021.11.11
*/
#ifndef _FSL_CACHE_H_
#define _FSL_CACHE_H_
#include "fsl_common.h"
/*!
* @addtogroup cache
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief cache driver version 2.0.1. */
#define FSL_CACHE_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
#if defined(FSL_FEATURE_SOC_L2CACHEC_COUNT) && FSL_FEATURE_SOC_L2CACHEC_COUNT
#ifndef FSL_SDK_DISBLE_L2CACHE_PRESENT
#define FSL_SDK_DISBLE_L2CACHE_PRESENT 0
#endif
#endif /* FSL_FEATURE_SOC_L2CACHEC_COUNT */
/*******************************************************************************
* Definitions
******************************************************************************/
#if defined(FSL_FEATURE_SOC_L2CACHEC_COUNT) && FSL_FEATURE_SOC_L2CACHEC_COUNT
/*! @brief Number of level 2 cache controller ways. */
typedef enum _l2cache_way_num
{
kL2CACHE_8ways = 0, /*!< 8 ways. */
#if defined(FSL_FEATURE_L2CACHE_SUPPORT_16_WAY_ASSOCIATIVITY) && FSL_FEATURE_L2CACHE_SUPPORT_16_WAY_ASSOCIATIVITY
kL2CACHE_16ways /*!< 16 ways. */
#endif /* FSL_FEATURE_L2CACHE_SUPPORT_16_WAY_ASSOCIATIVITY */
} l2cache_way_num_t;
/*! @brief Level 2 cache controller way size. */
typedef enum _l2cache_way_size
{
kL2CACHE_16KBSize = 1, /*!< 16 KB way size. */
kL2CACHE_32KBSize = 2, /*!< 32 KB way size. */
kL2CACHE_64KBSize = 3, /*!< 64 KB way size. */
kL2CACHE_128KBSize = 4, /*!< 128 KB way size. */
kL2CACHE_256KBSize = 5, /*!< 256 KB way size. */
kL2CACHE_512KBSize = 6 /*!< 512 KB way size. */
} l2cache_way_size;
/*! @brief Level 2 cache controller replacement policy. */
typedef enum _l2cache_replacement
{
kL2CACHE_Pseudorandom = 0U, /*!< Peseudo-random replacement policy using an lfsr. */
kL2CACHE_Roundrobin /*!< Round-robin replacemnt policy. */
} l2cache_replacement_t;
/*! @brief Level 2 cache controller force write allocate options. */
typedef enum _l2cache_writealloc
{
kL2CACHE_UseAwcache = 0, /*!< Use AWCAHE attribute for the write allocate. */
kL2CACHE_NoWriteallocate, /*!< Force no write allocate. */
kL2CACHE_forceWriteallocate /*!< Force write allocate when write misses. */
} l2cache_writealloc_t;
/*! @brief Level 2 cache controller tag/data ram latency. */
typedef enum _l2cache_latency
{
kL2CACHE_1CycleLate = 0, /*!< 1 cycle of latency. */
kL2CACHE_2CycleLate, /*!< 2 cycle of latency. */
kL2CACHE_3CycleLate, /*!< 3 cycle of latency. */
kL2CACHE_4CycleLate, /*!< 4 cycle of latency. */
kL2CACHE_5CycleLate, /*!< 5 cycle of latency. */
kL2CACHE_6CycleLate, /*!< 6 cycle of latency. */
kL2CACHE_7CycleLate, /*!< 7 cycle of latency. */
kL2CACHE_8CycleLate /*!< 8 cycle of latency. */
} l2cache_latency_t;
/*! @brief Level 2 cache controller tag/data ram latency configure structure. */
typedef struct _l2cache_latency_config
{
l2cache_latency_t tagWriteLate; /*!< Tag write latency. */
l2cache_latency_t tagReadLate; /*!< Tag Read latency. */
l2cache_latency_t tagSetupLate; /*!< Tag setup latency. */
l2cache_latency_t dataWriteLate; /*!< Data write latency. */
l2cache_latency_t dataReadLate; /*!< Data Read latency. */
l2cache_latency_t dataSetupLate; /*!< Data setup latency. */
} L2cache_latency_config_t;
/*! @brief Level 2 cache controller configure structure. */
typedef struct _l2cache_config
{
/* ------------------------ l2 cachec basic settings ---------------------------- */
l2cache_way_num_t wayNum; /*!< The number of ways. */
l2cache_way_size waySize; /*!< The way size = Cache Ram size / wayNum. */
l2cache_replacement_t repacePolicy; /*!< Replacemnet policy. */
/* ------------------------ tag/data ram latency settings ----------------------- */
L2cache_latency_config_t *lateConfig; /*!< Tag/data latency configure. Set NUll if not required. */
/* ------------------------ Prefetch enable settings ---------------------------- */
bool istrPrefetchEnable; /*!< Instruction prefetch enable. */
bool dataPrefetchEnable; /*!< Data prefetch enable. */
/* ------------------------ Non-secure access settings -------------------------- */
bool nsLockdownEnable; /*!< None-secure lockdown enable. */
/* ------------------------ other settings -------------------------------------- */
l2cache_writealloc_t writeAlloc; /*!< Write allcoate force option. */
} l2cache_config_t;
#endif /* FSL_FEATURE_SOC_L2CACHEC_COUNT */
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name Control for cortex-m7 L1 cache
*@{
*/
/*!
* @brief Enables cortex-m7 L1 instruction cache.
*
*/
static inline void L1CACHE_EnableICache(void)
{
SCB_EnableICache();
}
/*!
* @brief Disables cortex-m7 L1 instruction cache.
*
*/
static inline void L1CACHE_DisableICache(void)
{
SCB_DisableICache();
}
/*!
* @brief Invalidate cortex-m7 L1 instruction cache.
*
*/
static inline void L1CACHE_InvalidateICache(void)
{
SCB_InvalidateICache();
}
/*!
* @brief Invalidate cortex-m7 L1 instruction cache by range.
*
* @param address The start address of the memory to be invalidated.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L1ICACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L1 I-cache line size if
* startAddr is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
void L1CACHE_InvalidateICacheByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Enables cortex-m7 L1 data cache.
*
*/
static inline void L1CACHE_EnableDCache(void)
{
SCB_EnableDCache();
}
/*!
* @brief Disables cortex-m7 L1 data cache.
*
*/
static inline void L1CACHE_DisableDCache(void)
{
SCB_DisableDCache();
}
/*!
* @brief Invalidates cortex-m7 L1 data cache.
*
*/
static inline void L1CACHE_InvalidateDCache(void)
{
SCB_InvalidateDCache();
}
/*!
* @brief Cleans cortex-m7 L1 data cache.
*
*/
static inline void L1CACHE_CleanDCache(void)
{
SCB_CleanDCache();
}
/*!
* @brief Cleans and Invalidates cortex-m7 L1 data cache.
*
*/
static inline void L1CACHE_CleanInvalidateDCache(void)
{
SCB_CleanInvalidateDCache();
}
/*!
* @brief Invalidates cortex-m7 L1 data cache by range.
*
* @param address The start address of the memory to be invalidated.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L1 D-cache line size if
* startAddr is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
static inline void L1CACHE_InvalidateDCacheByRange(uint32_t address, uint32_t size_byte)
{
uint32_t startAddr = address & (uint32_t) ~(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE - 1);
uint32_t size = size_byte + address - startAddr;
SCB_InvalidateDCache_by_Addr((uint32_t *)startAddr, size);
}
/*!
* @brief Cleans cortex-m7 L1 data cache by range.
*
* @param address The start address of the memory to be cleaned.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L1 D-cache line size if
* startAddr is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
static inline void L1CACHE_CleanDCacheByRange(uint32_t address, uint32_t size_byte)
{
uint32_t startAddr = address & (uint32_t) ~(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE - 1);
uint32_t size = size_byte + address - startAddr;
SCB_CleanDCache_by_Addr((uint32_t *)startAddr, size);
}
/*!
* @brief Cleans and Invalidates cortex-m7 L1 data cache by range.
*
* @param address The start address of the memory to be clean and invalidated.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L1 D-cache line size if
* startAddr is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
static inline void L1CACHE_CleanInvalidateDCacheByRange(uint32_t address, uint32_t size_byte)
{
uint32_t startAddr = address & (uint32_t) ~(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE - 1);
uint32_t size = size_byte + address - startAddr;
SCB_CleanInvalidateDCache_by_Addr((uint32_t *)startAddr, size);
}
/*@}*/
#if defined(FSL_FEATURE_SOC_L2CACHEC_COUNT) && FSL_FEATURE_SOC_L2CACHEC_COUNT
/*!
* @name Control for L2 pl310 cache
*@{
*/
/*!
* @brief Initializes the level 2 cache controller module.
*
* @param config Pointer to configuration structure. See "l2cache_config_t".
*/
void L2CACHE_Init(l2cache_config_t *config);
/*!
* @brief Gets an available default settings for the cache controller.
*
* This function initializes the cache controller configuration structure with default settings.
* The default values are:
* @code
* config->waysNum = kL2CACHE_8ways;
* config->waySize = kL2CACHE_32KbSize;
* config->repacePolicy = kL2CACHE_Roundrobin;
* config->lateConfig = NULL;
* config->istrPrefetchEnable = false;
* config->dataPrefetchEnable = false;
* config->nsLockdownEnable = false;
* config->writeAlloc = kL2CACHE_UseAwcache;
* @endcode
* @param config Pointer to the configuration structure.
*/
void L2CACHE_GetDefaultConfig(l2cache_config_t *config);
/*!
* @brief Enables the level 2 cache controller.
* This function enables the cache controller. Must be written using a secure access.
* If write with a Non-secure access will cause a DECERR response.
*
*/
void L2CACHE_Enable(void);
/*!
* @brief Disables the level 2 cache controller.
* This function disables the cache controller. Must be written using a secure access.
* If write with a Non-secure access will cause a DECERR response.
*
*/
void L2CACHE_Disable(void);
/*!
* @brief Invalidates the Level 2 cache.
* This function invalidates all entries in cache.
*
*/
void L2CACHE_Invalidate(void);
/*!
* @brief Invalidates the Level 2 cache lines in the range of two physical addresses.
* This function invalidates all cache lines between two physical addresses.
*
* @param address The start address of the memory to be invalidated.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L2CACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L2 line size if startAddr
* is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
void L2CACHE_InvalidateByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Cleans the level 2 cache controller.
* This function cleans all entries in the level 2 cache controller.
*
*/
void L2CACHE_Clean(void);
/*!
* @brief Cleans the Level 2 cache lines in the range of two physical addresses.
* This function cleans all cache lines between two physical addresses.
*
* @param address The start address of the memory to be cleaned.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L2CACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L2 line size if startAddr
* is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
void L2CACHE_CleanByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Cleans and invalidates the level 2 cache controller.
* This function cleans and invalidates all entries in the level 2 cache controller.
*
*/
void L2CACHE_CleanInvalidate(void);
/*!
* @brief Cleans and invalidates the Level 2 cache lines in the range of two physical addresses.
* This function cleans and invalidates all cache lines between two physical addresses.
*
* @param address The start address of the memory to be cleaned and invalidated.
* @param size_byte The memory size.
* @note The start address and size_byte should be 32-byte(FSL_FEATURE_L2CACHE_LINESIZE_BYTE) aligned.
* The startAddr here will be forced to align to L2 line size if startAddr
* is not aligned. For the size_byte, application should make sure the
* alignment or make sure the right operation order if the size_byte is not aligned.
*/
void L2CACHE_CleanInvalidateByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Enables or disables to lock down the data and instruction by way.
* This function locks down the cached instruction/data by way and prevent the adresses from
* being allocated and prevent dara from being evicted out of the level 2 cache.
* But the normal cache maintenance operations that invalidate, clean or clean
* and validate cache contents affect the locked-down cache lines as normal.
*
* @param masterId The master id, range from 0 ~ 7.
* @param mask The ways to be enabled or disabled to lockdown.
* each bit in value is related to each way of the cache. for example:
* value: bit 0 ------ way 0.
* value: bit 1 ------ way 1.
* --------------------------
* value: bit 15 ------ way 15.
* Note: please make sure the value setting is align with your supported ways.
* @param enable True enable the lockdown, false to disable the lockdown.
*/
void L2CACHE_LockdownByWayEnable(uint32_t masterId, uint32_t mask, bool enable);
/*@}*/
#endif /* FSL_FEATURE_SOC_L2CACHEC_COUNT */
/*!
* @name Unified Cache Control for all caches (cortex-m7 L1 cache + l2 pl310)
* Mainly used for many drivers for easy cache operation.
*@{
*/
/*!
* @brief Invalidates all instruction caches by range.
*
* Both cortex-m7 L1 cache line and L2 PL310 cache line length is 32-byte.
*
* @param address The physical address.
* @param size_byte size of the memory to be invalidated.
* @note address and size should be aligned to cache line size
* 32-Byte due to the cache operation unit is one cache line. The startAddr here will be forced
* to align to the cache line size if startAddr is not aligned. For the size_byte, application should
* make sure the alignment or make sure the right operation order if the size_byte is not aligned.
*/
void ICACHE_InvalidateByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Invalidates all data caches by range.
*
* Both cortex-m7 L1 cache line and L2 PL310 cache line length is 32-byte.
*
* @param address The physical address.
* @param size_byte size of the memory to be invalidated.
* @note address and size should be aligned to cache line size
* 32-Byte due to the cache operation unit is one cache line. The startAddr here will be forced
* to align to the cache line size if startAddr is not aligned. For the size_byte, application should
* make sure the alignment or make sure the right operation order if the size_byte is not aligned.
*/
void DCACHE_InvalidateByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Cleans all data caches by range.
*
* Both cortex-m7 L1 cache line and L2 PL310 cache line length is 32-byte.
*
* @param address The physical address.
* @param size_byte size of the memory to be cleaned.
* @note address and size should be aligned to cache line size
* 32-Byte due to the cache operation unit is one cache line. The startAddr here will be forced
* to align to the cache line size if startAddr is not aligned. For the size_byte, application should
* make sure the alignment or make sure the right operation order if the size_byte is not aligned.
*/
void DCACHE_CleanByRange(uint32_t address, uint32_t size_byte);
/*!
* @brief Cleans and Invalidates all data caches by range.
*
* Both cortex-m7 L1 cache line and L2 PL310 cache line length is 32-byte.
*
* @param address The physical address.
* @param size_byte size of the memory to be cleaned and invalidated.
* @note address and size should be aligned to cache line size
* 32-Byte due to the cache operation unit is one cache line. The startAddr here will be forced
* to align to the cache line size if startAddr is not aligned. For the size_byte, application should
* make sure the alignment or make sure the right operation order if the size_byte is not aligned.
*/
void DCACHE_CleanInvalidateByRange(uint32_t address, uint32_t size_byte);
/*@}*/
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_CACHE_H_*/
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_clock.h
Executable
+1580
View File
File diff suppressed because it is too large Load Diff
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_common.h
Executable
+605
View File
@@ -0,0 +1,605 @@
/*
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2021 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file fsl_common.h
* @brief common drivers header
* @version 1.0
* @author AIIT XUOS Lab
* @date 2021.11.11
*/
#ifndef _FSL_COMMON_H_
#define _FSL_COMMON_H_
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include <stdlib.h>
#if defined(__ICCARM__)
#include <stddef.h>
#endif
#include "fsl_device_registers.h"
/*!
* @addtogroup ksdk_common
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @brief Construct a status code value from a group and code number. */
#define MAKE_STATUS(group, code) ((((group)*100) + (code)))
/*! @brief Construct the version number for drivers. */
#define MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix))
/*! @name Driver version */
/*@{*/
/*! @brief common driver version 2.0.1. */
#define FSL_COMMON_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
/* Debug console type definition. */
#define DEBUG_CONSOLE_DEVICE_TYPE_NONE 0U /*!< No debug console. */
#define DEBUG_CONSOLE_DEVICE_TYPE_UART 1U /*!< Debug console based on UART. */
#define DEBUG_CONSOLE_DEVICE_TYPE_LPUART 2U /*!< Debug console based on LPUART. */
#define DEBUG_CONSOLE_DEVICE_TYPE_LPSCI 3U /*!< Debug console based on LPSCI. */
#define DEBUG_CONSOLE_DEVICE_TYPE_USBCDC 4U /*!< Debug console based on USBCDC. */
#define DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM 5U /*!< Debug console based on FLEXCOMM. */
#define DEBUG_CONSOLE_DEVICE_TYPE_IUART 6U /*!< Debug console based on i.MX UART. */
#define DEBUG_CONSOLE_DEVICE_TYPE_VUSART 7U /*!< Debug console based on LPC_VUSART. */
#define DEBUG_CONSOLE_DEVICE_TYPE_MINI_USART 8U /*!< Debug console based on LPC_USART. */
#define DEBUG_CONSOLE_DEVICE_TYPE_SWO 9U /*!< Debug console based on SWO. */
/*! @brief Status group numbers. */
enum _status_groups
{
kStatusGroup_Generic = 0, /*!< Group number for generic status codes. */
kStatusGroup_FLASH = 1, /*!< Group number for FLASH status codes. */
kStatusGroup_LPSPI = 4, /*!< Group number for LPSPI status codes. */
kStatusGroup_FLEXIO_SPI = 5, /*!< Group number for FLEXIO SPI status codes. */
kStatusGroup_DSPI = 6, /*!< Group number for DSPI status codes. */
kStatusGroup_FLEXIO_UART = 7, /*!< Group number for FLEXIO UART status codes. */
kStatusGroup_FLEXIO_I2C = 8, /*!< Group number for FLEXIO I2C status codes. */
kStatusGroup_LPI2C = 9, /*!< Group number for LPI2C status codes. */
kStatusGroup_UART = 10, /*!< Group number for UART status codes. */
kStatusGroup_I2C = 11, /*!< Group number for UART status codes. */
kStatusGroup_LPSCI = 12, /*!< Group number for LPSCI status codes. */
kStatusGroup_LPUART = 13, /*!< Group number for LPUART status codes. */
kStatusGroup_SPI = 14, /*!< Group number for SPI status code.*/
kStatusGroup_XRDC = 15, /*!< Group number for XRDC status code.*/
kStatusGroup_SEMA42 = 16, /*!< Group number for SEMA42 status code.*/
kStatusGroup_SDHC = 17, /*!< Group number for SDHC status code */
kStatusGroup_SDMMC = 18, /*!< Group number for SDMMC status code */
kStatusGroup_SAI = 19, /*!< Group number for SAI status code */
kStatusGroup_MCG = 20, /*!< Group number for MCG status codes. */
kStatusGroup_SCG = 21, /*!< Group number for SCG status codes. */
kStatusGroup_SDSPI = 22, /*!< Group number for SDSPI status codes. */
kStatusGroup_FLEXIO_I2S = 23, /*!< Group number for FLEXIO I2S status codes */
kStatusGroup_FLEXIO_MCULCD = 24, /*!< Group number for FLEXIO LCD status codes */
kStatusGroup_FLASHIAP = 25, /*!< Group number for FLASHIAP status codes */
kStatusGroup_FLEXCOMM_I2C = 26, /*!< Group number for FLEXCOMM I2C status codes */
kStatusGroup_I2S = 27, /*!< Group number for I2S status codes */
kStatusGroup_IUART = 28, /*!< Group number for IUART status codes */
kStatusGroup_CSI = 29, /*!< Group number for CSI status codes */
kStatusGroup_MIPI_DSI = 30, /*!< Group number for MIPI DSI status codes */
kStatusGroup_SDRAMC = 35, /*!< Group number for SDRAMC status codes. */
kStatusGroup_POWER = 39, /*!< Group number for POWER status codes. */
kStatusGroup_ENET = 40, /*!< Group number for ENET status codes. */
kStatusGroup_PHY = 41, /*!< Group number for PHY status codes. */
kStatusGroup_TRGMUX = 42, /*!< Group number for TRGMUX status codes. */
kStatusGroup_SMARTCARD = 43, /*!< Group number for SMARTCARD status codes. */
kStatusGroup_LMEM = 44, /*!< Group number for LMEM status codes. */
kStatusGroup_QSPI = 45, /*!< Group number for QSPI status codes. */
kStatusGroup_DMA = 50, /*!< Group number for DMA status codes. */
kStatusGroup_EDMA = 51, /*!< Group number for EDMA status codes. */
kStatusGroup_DMAMGR = 52, /*!< Group number for DMAMGR status codes. */
kStatusGroup_FLEXCAN = 53, /*!< Group number for FlexCAN status codes. */
kStatusGroup_LTC = 54, /*!< Group number for LTC status codes. */
kStatusGroup_FLEXIO_CAMERA = 55, /*!< Group number for FLEXIO CAMERA status codes. */
kStatusGroup_LPC_SPI = 56, /*!< Group number for LPC_SPI status codes. */
kStatusGroup_LPC_USART = 57, /*!< Group number for LPC_USART status codes. */
kStatusGroup_DMIC = 58, /*!< Group number for DMIC status codes. */
kStatusGroup_SDIF = 59, /*!< Group number for SDIF status codes.*/
kStatusGroup_SPIFI = 60, /*!< Group number for SPIFI status codes. */
kStatusGroup_OTP = 61, /*!< Group number for OTP status codes. */
kStatusGroup_MCAN = 62, /*!< Group number for MCAN status codes. */
kStatusGroup_CAAM = 63, /*!< Group number for CAAM status codes. */
kStatusGroup_ECSPI = 64, /*!< Group number for ECSPI status codes. */
kStatusGroup_USDHC = 65, /*!< Group number for USDHC status codes.*/
kStatusGroup_LPC_I2C = 66, /*!< Group number for LPC_I2C status codes.*/
kStatusGroup_DCP = 67, /*!< Group number for DCP status codes.*/
kStatusGroup_MSCAN = 68, /*!< Group number for MSCAN status codes.*/
kStatusGroup_ESAI = 69, /*!< Group number for ESAI status codes. */
kStatusGroup_FLEXSPI = 70, /*!< Group number for FLEXSPI status codes. */
kStatusGroup_MMDC = 71, /*!< Group number for MMDC status codes. */
kStatusGroup_PDM = 72, /*!< Group number for MIC status codes. */
kStatusGroup_SDMA = 73, /*!< Group number for SDMA status codes. */
kStatusGroup_ICS = 74, /*!< Group number for ICS status codes. */
kStatusGroup_SPDIF = 75, /*!< Group number for SPDIF status codes. */
kStatusGroup_LPC_MINISPI = 76, /*!< Group number for LPC_MINISPI status codes. */
kStatusGroup_HASHCRYPT = 77, /*!< Group number for Hashcrypt status codes */
kStatusGroup_LPC_SPI_SSP = 78, /*!< Group number for LPC_SPI_SSP status codes. */
kStatusGroup_LPC_I2C_1 = 97, /*!< Group number for LPC_I2C_1 status codes. */
kStatusGroup_NOTIFIER = 98, /*!< Group number for NOTIFIER status codes. */
kStatusGroup_DebugConsole = 99, /*!< Group number for debug console status codes. */
kStatusGroup_SEMC = 100, /*!< Group number for SEMC status codes. */
kStatusGroup_ApplicationRangeStart = 101, /*!< Starting number for application groups. */
kStatusGroup_IAP = 102, /*!< Group number for IAP status codes */
kStatusGroup_HAL_GPIO = 121, /*!< Group number for HAL GPIO status codes. */
kStatusGroup_HAL_UART = 122, /*!< Group number for HAL UART status codes. */
kStatusGroup_HAL_TIMER = 123, /*!< Group number for HAL TIMER status codes. */
kStatusGroup_HAL_SPI = 124, /*!< Group number for HAL SPI status codes. */
kStatusGroup_HAL_I2C = 125, /*!< Group number for HAL I2C status codes. */
kStatusGroup_HAL_FLASH = 126, /*!< Group number for HAL FLASH status codes. */
kStatusGroup_HAL_PWM = 127, /*!< Group number for HAL PWM status codes. */
kStatusGroup_HAL_RNG = 128, /*!< Group number for HAL RNG status codes. */
kStatusGroup_TIMERMANAGER = 135, /*!< Group number for TiMER MANAGER status codes. */
kStatusGroup_SERIALMANAGER = 136, /*!< Group number for SERIAL MANAGER status codes. */
kStatusGroup_LED = 137, /*!< Group number for LED status codes. */
kStatusGroup_BUTTON = 138, /*!< Group number for BUTTON status codes. */
kStatusGroup_EXTERN_EEPROM = 139, /*!< Group number for EXTERN EEPROM status codes. */
kStatusGroup_SHELL = 140, /*!< Group number for SHELL status codes. */
kStatusGroup_MEM_MANAGER = 141, /*!< Group number for MEM MANAGER status codes. */
kStatusGroup_LIST = 142, /*!< Group number for List status codes. */
kStatusGroup_OSA = 143, /*!< Group number for OSA status codes. */
kStatusGroup_COMMON_TASK = 144, /*!< Group number for Common task status codes. */
kStatusGroup_MSG = 145, /*!< Group number for messaging status codes. */
};
/*! @brief Generic status return codes. */
enum _generic_status
{
kStatus_Success = MAKE_STATUS(kStatusGroup_Generic, 0),
kStatus_Fail = MAKE_STATUS(kStatusGroup_Generic, 1),
kStatus_ReadOnly = MAKE_STATUS(kStatusGroup_Generic, 2),
kStatus_OutOfRange = MAKE_STATUS(kStatusGroup_Generic, 3),
kStatus_InvalidArgument = MAKE_STATUS(kStatusGroup_Generic, 4),
kStatus_Timeout = MAKE_STATUS(kStatusGroup_Generic, 5),
kStatus_NoTransferInProgress = MAKE_STATUS(kStatusGroup_Generic, 6),
};
/*! @brief Type used for all status and error return values. */
typedef int32_t status_t;
/*
* The fsl_clock.h is included here because it needs MAKE_VERSION/MAKE_STATUS/status_t
* defined in previous of this file.
*/
#include "fsl_clock.h"
/*
* Chip level peripheral reset API, for MCUs that implement peripheral reset control external to a peripheral
*/
#if ((defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0)) || \
(defined(FSL_FEATURE_SOC_ASYNC_SYSCON_COUNT) && (FSL_FEATURE_SOC_ASYNC_SYSCON_COUNT > 0)))
#include "fsl_reset.h"
#endif
/*
* Macro guard for whether to use default weak IRQ implementation in drivers
*/
#ifndef FSL_DRIVER_TRANSFER_DOUBLE_WEAK_IRQ
#define FSL_DRIVER_TRANSFER_DOUBLE_WEAK_IRQ 1
#endif
/*! @name Min/max macros */
/* @{ */
#if !defined(MIN)
#define MIN(a, b) ((a) < (b) ? (a) : (b))
#endif
#if !defined(MAX)
#define MAX(a, b) ((a) > (b) ? (a) : (b))
#endif
/* @} */
/*! @brief Computes the number of elements in an array. */
#if !defined(ARRAY_SIZE)
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#endif
/*! @name UINT16_MAX/UINT32_MAX value */
/* @{ */
#if !defined(UINT16_MAX)
#define UINT16_MAX ((uint16_t)-1)
#endif
#if !defined(UINT32_MAX)
#define UINT32_MAX ((uint32_t)-1)
#endif
/* @} */
/*! @name Timer utilities */
/* @{ */
/*! Macro to convert a microsecond period to raw count value */
#define USEC_TO_COUNT(us, clockFreqInHz) (uint64_t)((uint64_t)us * clockFreqInHz / 1000000U)
/*! Macro to convert a raw count value to microsecond */
#define COUNT_TO_USEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000000U / clockFreqInHz)
/*! Macro to convert a millisecond period to raw count value */
#define MSEC_TO_COUNT(ms, clockFreqInHz) (uint64_t)((uint64_t)ms * clockFreqInHz / 1000U)
/*! Macro to convert a raw count value to millisecond */
#define COUNT_TO_MSEC(count, clockFreqInHz) (uint64_t)((uint64_t)count * 1000U / clockFreqInHz)
/* @} */
/*! @name Alignment variable definition macros */
/* @{ */
#if (defined(__ICCARM__))
/**
* Workaround to disable MISRA C message suppress warnings for IAR compiler.
* http://supp.iar.com/Support/?note=24725
*/
_Pragma("diag_suppress=Pm120")
#define SDK_PRAGMA(x) _Pragma(#x)
_Pragma("diag_error=Pm120")
/*! Macro to define a variable with alignbytes alignment */
#define SDK_ALIGN(var, alignbytes) SDK_PRAGMA(data_alignment = alignbytes) var
/*! Macro to define a variable with L1 d-cache line size alignment */
#if defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define SDK_L1DCACHE_ALIGN(var) SDK_PRAGMA(data_alignment = FSL_FEATURE_L1DCACHE_LINESIZE_BYTE) var
#endif
/*! Macro to define a variable with L2 cache line size alignment */
#if defined(FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#define SDK_L2CACHE_ALIGN(var) SDK_PRAGMA(data_alignment = FSL_FEATURE_L2CACHE_LINESIZE_BYTE) var
#endif
#elif defined(__CC_ARM) || defined(__ARMCC_VERSION)
/*! Macro to define a variable with alignbytes alignment */
#define SDK_ALIGN(var, alignbytes) __attribute__((aligned(alignbytes))) var
/*! Macro to define a variable with L1 d-cache line size alignment */
#if defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define SDK_L1DCACHE_ALIGN(var) __attribute__((aligned(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE))) var
#endif
/*! Macro to define a variable with L2 cache line size alignment */
#if defined(FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#define SDK_L2CACHE_ALIGN(var) __attribute__((aligned(FSL_FEATURE_L2CACHE_LINESIZE_BYTE))) var
#endif
#elif defined(__GNUC__)
/*! Macro to define a variable with alignbytes alignment */
#define SDK_ALIGN(var, alignbytes) var __attribute__((aligned(alignbytes)))
/*! Macro to define a variable with L1 d-cache line size alignment */
#if defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define SDK_L1DCACHE_ALIGN(var) var __attribute__((aligned(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)))
#endif
/*! Macro to define a variable with L2 cache line size alignment */
#if defined(FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#define SDK_L2CACHE_ALIGN(var) var __attribute__((aligned(FSL_FEATURE_L2CACHE_LINESIZE_BYTE)))
#endif
#else
#error Toolchain not supported
#define SDK_ALIGN(var, alignbytes) var
#if defined(FSL_FEATURE_L1DCACHE_LINESIZE_BYTE)
#define SDK_L1DCACHE_ALIGN(var) var
#endif
#if defined(FSL_FEATURE_L2CACHE_LINESIZE_BYTE)
#define SDK_L2CACHE_ALIGN(var) var
#endif
#endif
/*! Macro to change a value to a given size aligned value */
#define SDK_SIZEALIGN(var, alignbytes) \
((unsigned int)((var) + ((alignbytes)-1)) & (unsigned int)(~(unsigned int)((alignbytes)-1)))
/* @} */
/*! @name Non-cacheable region definition macros */
/* For initialized non-zero non-cacheable variables, please using "AT_NONCACHEABLE_SECTION_INIT(var) ={xx};" or
* "AT_NONCACHEABLE_SECTION_ALIGN_INIT(var) ={xx};" in your projects to define them, for zero-inited non-cacheable variables,
* please using "AT_NONCACHEABLE_SECTION(var);" or "AT_NONCACHEABLE_SECTION_ALIGN(var);" to define them, these zero-inited variables
* will be initialized to zero in system startup.
*/
/* @{ */
#if (defined(__ICCARM__))
#if ((!(defined(FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION) && FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION)) && defined(FSL_FEATURE_L1ICACHE_LINESIZE_BYTE))
#define AT_NONCACHEABLE_SECTION(var) var @"NonCacheable"
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) SDK_PRAGMA(data_alignment = alignbytes) var @"NonCacheable"
#define AT_NONCACHEABLE_SECTION_INIT(var) var @"NonCacheable.init"
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) SDK_PRAGMA(data_alignment = alignbytes) var @"NonCacheable.init"
#else
#define AT_NONCACHEABLE_SECTION(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) SDK_PRAGMA(data_alignment = alignbytes) var
#define AT_NONCACHEABLE_SECTION_INIT(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) SDK_PRAGMA(data_alignment = alignbytes) var
#endif
#elif(defined(__CC_ARM) || defined(__ARMCC_VERSION))
#if ((!(defined(FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION) && FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION)) && defined(FSL_FEATURE_L1ICACHE_LINESIZE_BYTE))
#define AT_NONCACHEABLE_SECTION(var) __attribute__((section("NonCacheable"), zero_init)) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) \
__attribute__((section("NonCacheable"), zero_init)) __attribute__((aligned(alignbytes))) var
#define AT_NONCACHEABLE_SECTION_INIT(var) __attribute__((section("NonCacheable.init"))) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) \
__attribute__((section("NonCacheable.init"))) __attribute__((aligned(alignbytes))) var
#else
#define AT_NONCACHEABLE_SECTION(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) __attribute__((aligned(alignbytes))) var
#define AT_NONCACHEABLE_SECTION_INIT(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) __attribute__((aligned(alignbytes))) var
#endif
#elif(defined(__GNUC__))
/* For GCC, when the non-cacheable section is required, please define "__STARTUP_INITIALIZE_NONCACHEDATA"
* in your projects to make sure the non-cacheable section variables will be initialized in system startup.
*/
#if ((!(defined(FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION) && FSL_FEATURE_HAS_NO_NONCACHEABLE_SECTION)) && defined(FSL_FEATURE_L1ICACHE_LINESIZE_BYTE))
#define AT_NONCACHEABLE_SECTION_INIT(var) __attribute__((section("NonCacheable.init"))) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) \
__attribute__((section("NonCacheable.init"))) var __attribute__((aligned(alignbytes)))
#define AT_NONCACHEABLE_SECTION(var) __attribute__((section("NonCacheable,\"aw\",%nobits @"))) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) \
__attribute__((section("NonCacheable,\"aw\",%nobits @"))) var __attribute__((aligned(alignbytes)))
#else
#define AT_NONCACHEABLE_SECTION(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) var __attribute__((aligned(alignbytes)))
#define AT_NONCACHEABLE_SECTION_INIT(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) var __attribute__((aligned(alignbytes)))
#endif
#else
#error Toolchain not supported.
#define AT_NONCACHEABLE_SECTION(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN(var, alignbytes) var
#define AT_NONCACHEABLE_SECTION_INIT(var) var
#define AT_NONCACHEABLE_SECTION_ALIGN_INIT(var, alignbytes) var
#endif
/* @} */
/*! @name Time sensitive region */
/* @{ */
#if defined(FSL_SDK_DRIVER_QUICK_ACCESS_ENABLE) && FSL_SDK_DRIVER_QUICK_ACCESS_ENABLE
#if (defined(__ICCARM__))
#define AT_QUICKACCESS_SECTION_CODE(func) func @"CodeQuickAccess"
#define AT_QUICKACCESS_SECTION_DATA(func) func @"DataQuickAccess"
#elif(defined(__CC_ARM) || defined(__ARMCC_VERSION))
#define AT_QUICKACCESS_SECTION_CODE(func) __attribute__((section("CodeQuickAccess"))) func
#define AT_QUICKACCESS_SECTION_DATA(func) __attribute__((section("DataQuickAccess"))) func
#elif(defined(__GNUC__))
#define AT_QUICKACCESS_SECTION_CODE(func) __attribute__((section("CodeQuickAccess"))) func
#define AT_QUICKACCESS_SECTION_DATA(func) __attribute__((section("DataQuickAccess"))) func
#else
#error Toolchain not supported.
#endif /* defined(__ICCARM__) */
#else
#if (defined(__ICCARM__))
#define AT_QUICKACCESS_SECTION_CODE(func) func
#define AT_QUICKACCESS_SECTION_DATA(func) func
#elif(defined(__CC_ARM) || defined(__ARMCC_VERSION))
#define AT_QUICKACCESS_SECTION_CODE(func) func
#define AT_QUICKACCESS_SECTION_DATA(func) func
#elif(defined(__GNUC__))
#define AT_QUICKACCESS_SECTION_CODE(func) func
#define AT_QUICKACCESS_SECTION_DATA(func) func
#else
#error Toolchain not supported.
#endif
#endif /* __FSL_SDK_DRIVER_QUICK_ACCESS_ENABLE */
/* @} */
/*! @name Ram Function */
#if (defined(__ICCARM__))
#define RAMFUNCTION_SECTION_CODE(func) func @"RamFunction"
#elif(defined(__CC_ARM) || defined(__ARMCC_VERSION))
#define RAMFUNCTION_SECTION_CODE(func) __attribute__((section("RamFunction"))) func
#elif(defined(__GNUC__))
#define RAMFUNCTION_SECTION_CODE(func) __attribute__((section("RamFunction"))) func
#else
#error Toolchain not supported.
#endif /* defined(__ICCARM__) */
/* @} */
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C"
{
#endif
/*!
* @brief Enable specific interrupt.
*
* Enable LEVEL1 interrupt. For some devices, there might be multiple interrupt
* levels. For example, there are NVIC and intmux. Here the interrupts connected
* to NVIC are the LEVEL1 interrupts, because they are routed to the core directly.
* The interrupts connected to intmux are the LEVEL2 interrupts, they are routed
* to NVIC first then routed to core.
*
* This function only enables the LEVEL1 interrupts. The number of LEVEL1 interrupts
* is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.
*
* @param interrupt The IRQ number.
* @retval kStatus_Success Interrupt enabled successfully
* @retval kStatus_Fail Failed to enable the interrupt
*/
static inline status_t EnableIRQ(IRQn_Type interrupt)
{
if (NotAvail_IRQn == interrupt)
{
return kStatus_Fail;
}
#if defined(FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS) && (FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS > 0)
if (interrupt >= FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS)
{
return kStatus_Fail;
}
#endif
#if defined(__GIC_PRIO_BITS)
GIC_EnableIRQ(interrupt);
#else
NVIC_EnableIRQ(interrupt);
#endif
return kStatus_Success;
}
/*!
* @brief Disable specific interrupt.
*
* Disable LEVEL1 interrupt. For some devices, there might be multiple interrupt
* levels. For example, there are NVIC and intmux. Here the interrupts connected
* to NVIC are the LEVEL1 interrupts, because they are routed to the core directly.
* The interrupts connected to intmux are the LEVEL2 interrupts, they are routed
* to NVIC first then routed to core.
*
* This function only disables the LEVEL1 interrupts. The number of LEVEL1 interrupts
* is indicated by the feature macro FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS.
*
* @param interrupt The IRQ number.
* @retval kStatus_Success Interrupt disabled successfully
* @retval kStatus_Fail Failed to disable the interrupt
*/
static inline status_t DisableIRQ(IRQn_Type interrupt)
{
if (NotAvail_IRQn == interrupt)
{
return kStatus_Fail;
}
#if defined(FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS) && (FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS > 0)
if (interrupt >= FSL_FEATURE_NUMBER_OF_LEVEL1_INT_VECTORS)
{
return kStatus_Fail;
}
#endif
#if defined(__GIC_PRIO_BITS)
GIC_DisableIRQ(interrupt);
#else
NVIC_DisableIRQ(interrupt);
#endif
return kStatus_Success;
}
/*!
* @brief Disable the global IRQ
*
* Disable the global interrupt and return the current primask register. User is required to provided the primask
* register for the EnableGlobalIRQ().
*
* @return Current primask value.
*/
static inline uint32_t DisableGlobalIRQ(void)
{
#if defined(CPSR_I_Msk)
uint32_t cpsr = __get_CPSR() & CPSR_I_Msk;
__disable_irq();
return cpsr;
#else
uint32_t regPrimask = __get_PRIMASK();
__disable_irq();
return regPrimask;
#endif
}
/*!
* @brief Enable the global IRQ
*
* Set the primask register with the provided primask value but not just enable the primask. The idea is for the
* convenience of integration of RTOS. some RTOS get its own management mechanism of primask. User is required to
* use the EnableGlobalIRQ() and DisableGlobalIRQ() in pair.
*
* @param primask value of primask register to be restored. The primask value is supposed to be provided by the
* DisableGlobalIRQ().
*/
static inline void EnableGlobalIRQ(uint32_t primask)
{
#if defined(CPSR_I_Msk)
__set_CPSR((__get_CPSR() & ~CPSR_I_Msk) | primask);
#else
__set_PRIMASK(primask);
#endif
}
#if defined(ENABLE_RAM_VECTOR_TABLE)
/*!
* @brief install IRQ handler
*
* @param irq IRQ number
* @param irqHandler IRQ handler address
* @return The old IRQ handler address
*/
uint32_t InstallIRQHandler(IRQn_Type irq, uint32_t irqHandler);
#endif /* ENABLE_RAM_VECTOR_TABLE. */
#if (defined(FSL_FEATURE_SOC_SYSCON_COUNT) && (FSL_FEATURE_SOC_SYSCON_COUNT > 0))
/*!
* @brief Enable specific interrupt for wake-up from deep-sleep mode.
*
* Enable the interrupt for wake-up from deep sleep mode.
* Some interrupts are typically used in sleep mode only and will not occur during
* deep-sleep mode because relevant clocks are stopped. However, it is possible to enable
* those clocks (significantly increasing power consumption in the reduced power mode),
* making these wake-ups possible.
*
* @note This function also enables the interrupt in the NVIC (EnableIRQ() is called internaly).
*
* @param interrupt The IRQ number.
*/
void EnableDeepSleepIRQ(IRQn_Type interrupt);
/*!
* @brief Disable specific interrupt for wake-up from deep-sleep mode.
*
* Disable the interrupt for wake-up from deep sleep mode.
* Some interrupts are typically used in sleep mode only and will not occur during
* deep-sleep mode because relevant clocks are stopped. However, it is possible to enable
* those clocks (significantly increasing power consumption in the reduced power mode),
* making these wake-ups possible.
*
* @note This function also disables the interrupt in the NVIC (DisableIRQ() is called internaly).
*
* @param interrupt The IRQ number.
*/
void DisableDeepSleepIRQ(IRQn_Type interrupt);
#endif /* FSL_FEATURE_SOC_SYSCON_COUNT */
/*!
* @brief Allocate memory with given alignment and aligned size.
*
* This is provided to support the dynamically allocated memory
* used in cache-able region.
* @param size The length required to malloc.
* @param alignbytes The alignment size.
* @retval The allocated memory.
*/
void *SDK_Malloc(size_t size, size_t alignbytes);
/*!
* @brief Free memory.
*
* @param ptr The memory to be release.
*/
void SDK_Free(void *ptr);
#if defined(__cplusplus)
}
#endif
/*! @} */
#endif /* _FSL_COMMON_H_ */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_debug_console.h
Executable
+213
View File
@@ -0,0 +1,213 @@
/*
* Copyright (c) 2013 - 2015, Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*
* Debug console shall provide input and output functions to scan and print formatted data.
* o Support a format specifier for PRINTF follows this prototype "%[flags][width][.precision][length]specifier"
* - [flags] :'-', '+', '#', ' ', '0'
* - [width]: number (0,1...)
* - [.precision]: number (0,1...)
* - [length]: do not support
* - [specifier]: 'd', 'i', 'f', 'F', 'x', 'X', 'o', 'p', 'u', 'c', 's', 'n'
* o Support a format specifier for SCANF follows this prototype " %[*][width][length]specifier"
* - [*]: is supported.
* - [width]: number (0,1...)
* - [length]: 'h', 'hh', 'l','ll','L'. ignore ('j','z','t')
* - [specifier]: 'd', 'i', 'u', 'f', 'F', 'e', 'E', 'g', 'G', 'a', 'A', 'o', 'c', 's'
*/
#ifndef _FSL_DEBUGCONSOLE_H_
#define _FSL_DEBUGCONSOLE_H_
#include "fsl_common.h"
//#include "serial_manager.h"
/*!
* @addtogroup debugconsole
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
extern serial_handle_t g_serialHandle; /*!< serial manager handle */
/*! @brief Definition select redirect toolchain printf, scanf to uart or not. */
#define DEBUGCONSOLE_REDIRECT_TO_TOOLCHAIN 0U /*!< Select toolchain printf and scanf. */
#define DEBUGCONSOLE_REDIRECT_TO_SDK 1U /*!< Select SDK version printf, scanf. */
#define DEBUGCONSOLE_DISABLE 2U /*!< Disable debugconsole function. */
/*! @brief Definition to select sdk or toolchain printf, scanf. The macro only support
* to be redefined in project setting.
*/
#ifndef SDK_DEBUGCONSOLE
#define SDK_DEBUGCONSOLE 1U
#endif
/*! @brief Definition to select redirect toolchain printf, scanf to uart or not. */
#ifndef SDK_DEBUGCONSOLE_UART
/* mcux will handle this macro, not define it here */
#if (!defined(__MCUXPRESSO))
#define SDK_DEBUGCONSOLE_UART
#endif
#endif
#if defined(SDK_DEBUGCONSOLE) && !(SDK_DEBUGCONSOLE)
#include <stdio.h>
#endif
/*! @brief Definition to select redirect toolchain printf, scanf to uart or not.
*
* if SDK_DEBUGCONSOLE defined to 0,it represents select toolchain printf, scanf.
* if SDK_DEBUGCONSOLE defined to 1,it represents select SDK version printf, scanf.
* if SDK_DEBUGCONSOLE defined to 2,it represents disable debugconsole function.
*/
#if SDK_DEBUGCONSOLE == DEBUGCONSOLE_DISABLE /* Disable debug console */
#define PRINTF
#define SCANF
#define PUTCHAR
#define GETCHAR
#elif SDK_DEBUGCONSOLE == DEBUGCONSOLE_REDIRECT_TO_SDK /* Select printf, scanf, putchar, getchar of SDK version. */
#define PRINTF DbgConsole_Printf
#define SCANF DbgConsole_Scanf
#define PUTCHAR DbgConsole_Putchar
#define GETCHAR DbgConsole_Getchar
#elif SDK_DEBUGCONSOLE == DEBUGCONSOLE_REDIRECT_TO_TOOLCHAIN /* Select printf, scanf, putchar, getchar of toolchain. \ \
*/
#define PRINTF printf
#define SCANF scanf
#define PUTCHAR putchar
#define GETCHAR getchar
#endif /* SDK_DEBUGCONSOLE */
/*******************************************************************************
* Prototypes
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* __cplusplus */
/*! @name Initialization*/
/* @{ */
/*!
* @brief Initializes the peripheral used for debug messages.
*
* Call this function to enable debug log messages to be output via the specified peripheral
* initialized by the serial manager module.
* After this function has returned, stdout and stdin are connected to the selected peripheral.
*
* @param instance The instance of the module.
* @param baudRate The desired baud rate in bits per second.
* @param device Low level device type for the debug console, can be one of the following.
* @arg kSerialPort_Uart,
* @arg kSerialPort_UsbCdc
* @arg kSerialPort_UsbCdcVirtual.
* @param clkSrcFreq Frequency of peripheral source clock.
*
* @return Indicates whether initialization was successful or not.
* @retval kStatus_Success Execution successfully
*/
status_t DbgConsole_Init(uint8_t instance, uint32_t baudRate, serial_port_type_t device, uint32_t clkSrcFreq);
/*!
* @brief De-initializes the peripheral used for debug messages.
*
* Call this function to disable debug log messages to be output via the specified peripheral
* initialized by the serial manager module.
*
* @return Indicates whether de-initialization was successful or not.
*/
status_t DbgConsole_Deinit(void);
#if SDK_DEBUGCONSOLE
/*!
* @brief Writes formatted output to the standard output stream.
*
* Call this function to write a formatted output to the standard output stream.
*
* @param formatString Format control string.
* @return Returns the number of characters printed or a negative value if an error occurs.
*/
int DbgConsole_Printf(const char *formatString, ...);
/*!
* @brief Writes a character to stdout.
*
* Call this function to write a character to stdout.
*
* @param ch Character to be written.
* @return Returns the character written.
*/
int DbgConsole_Putchar(int ch);
/*!
* @brief Reads formatted data from the standard input stream.
*
* Call this function to read formatted data from the standard input stream.
*
* @note Due the limitation in the BM OSA environment (CPU is blocked in the function,
* other tasks will not be scheduled), the function cannot be used when the
* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING is set in the BM OSA environment.
* And an error is returned when the function called in this case. The suggestion
* is that polling the non-blocking function DbgConsole_TryGetchar to get the input char.
*
* @param formatString Format control string.
* @return Returns the number of fields successfully converted and assigned.
*/
int DbgConsole_Scanf(char *formatString, ...);
/*!
* @brief Reads a character from standard input.
*
* Call this function to read a character from standard input.
*
* @note Due the limitation in the BM OSA environment (CPU is blocked in the function,
* other tasks will not be scheduled), the function cannot be used when the
* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING is set in the BM OSA environment.
* And an error is returned when the function called in this case. The suggestion
* is that polling the non-blocking function DbgConsole_TryGetchar to get the input char.
*
* @return Returns the character read.
*/
int DbgConsole_Getchar(void);
/*!
* @brief Debug console flush.
*
* Call this function to wait the tx buffer empty.
* If interrupt transfer is using, make sure the global IRQ is enable before call this function
* This function should be called when
* 1, before enter power down mode
* 2, log is required to print to terminal immediately
* @return Indicates whether wait idle was successful or not.
*/
status_t DbgConsole_Flush(void);
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
/*!
* @brief Debug console try to get char
* This function provides a API which will not block current task, if character is
* available return it, otherwise return fail.
* @param ch the address of char to receive
* @return Indicates get char was successful or not.
*/
status_t DbgConsole_TryGetchar(char *ch);
#endif
#endif /* SDK_DEBUGCONSOLE */
/*! @} */
#if defined(__cplusplus)
}
#endif /* __cplusplus */
/*! @} */
#endif /* _FSL_DEBUGCONSOLE_H_ */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_debug_console_conf.h
Executable
+158
View File
@@ -0,0 +1,158 @@
/*
* Copyright 2017 - 2019 NXP
* All rights reserved.
*
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_DEBUG_CONSOLE_CONF_H_
#define _FSL_DEBUG_CONSOLE_CONF_H_
/****************Debug console configuration********************/
/*! @brief If Non-blocking mode is needed, please define it at project setting,
* otherwise blocking mode is the default transfer mode.
* Warning: If you want to use non-blocking transfer,please make sure the corresponding
* IO interrupt is enable, otherwise there is no output.
* And non-blocking is combine with buffer, no matter bare-metal or rtos.
* Below shows how to configure in your project if you want to use non-blocking mode.
* For IAR, right click project and select "Options", define it in "C/C++ Compiler->Preprocessor->Defined symbols".
* For KEIL, click "Options for Target…", define it in "C/C++->Preprocessor Symbols->Define".
* For ARMGCC, open CmakeLists.txt and add the following lines,
* "SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DDEBUG_CONSOLE_TRANSFER_NON_BLOCKING")" for debug target.
* "SET(CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} -DDEBUG_CONSOLE_TRANSFER_NON_BLOCKING")" for release target.
* For MCUxpresso, right click project and select "Properties", define it in "C/C++ Build->Settings->MCU C
* Complier->Preprocessor".
*
*/
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
/*! @brief define the transmit buffer length which is used to store the multi task log, buffer is enabled automatically
* when
* non-blocking transfer is using,
* This value will affect the RAM's ultilization, should be set per paltform's capability and software requirement.
* If it is configured too small, log maybe missed , because the log will not be
* buffered if the buffer is full, and the print will return immediately with -1.
* And this value should be multiple of 4 to meet memory alignment.
*
*/
#ifndef DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN
#define DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN (512U)
#endif /* DEBUG_CONSOLE_TRANSMIT_BUFFER_LEN */
/*! @brief define the receive buffer length which is used to store the user input, buffer is enabled automatically when
* non-blocking transfer is using,
* This value will affect the RAM's ultilization, should be set per paltform's capability and software requirement.
* If it is configured too small, log maybe missed, because buffer will be overwrited if buffer is too small.
* And this value should be multiple of 4 to meet memory alignment.
*
*/
#ifndef DEBUG_CONSOLE_RECEIVE_BUFFER_LEN
#define DEBUG_CONSOLE_RECEIVE_BUFFER_LEN (1024U)
#endif /* DEBUG_CONSOLE_RECEIVE_BUFFER_LEN */
/*!@ brief Whether enable the reliable TX function
* If the macro is zero, the reliable TX function of the debug console is disabled.
* When the macro is zero, the string of PRINTF will be thrown away after the transmit buffer is full.
*/
#ifndef DEBUG_CONSOLE_TX_RELIABLE_ENABLE
#define DEBUG_CONSOLE_TX_RELIABLE_ENABLE (1U)
#endif /* DEBUG_CONSOLE_RX_ENABLE */
#else
#define DEBUG_CONSOLE_TRANSFER_BLOCKING
#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */
/*!@ brief Whether enable the RX function
* If the macro is zero, the receive function of the debug console is disabled.
*/
#ifndef DEBUG_CONSOLE_RX_ENABLE
#define DEBUG_CONSOLE_RX_ENABLE (1U)
#endif /* DEBUG_CONSOLE_RX_ENABLE */
/*!@ brief define the MAX log length debug console support , that is when you call printf("log", x);, the log
* length can not bigger than this value.
* This macro decide the local log buffer length, the buffer locate at stack, the stack maybe overflow if
* the buffer is too big and current task stack size not big enough.
*/
#ifndef DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN
#define DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN (128U)
#endif /* DEBUG_CONSOLE_PRINTF_MAX_LOG_LEN */
/*!@ brief define the buffer support buffer scanf log length, that is when you call scanf("log", &x);, the log
* length can not bigger than this value.
* As same as the DEBUG_CONSOLE_BUFFER_PRINTF_MAX_LOG_LEN.
*/
#ifndef DEBUG_CONSOLE_SCANF_MAX_LOG_LEN
#define DEBUG_CONSOLE_SCANF_MAX_LOG_LEN (20U)
#endif /* DEBUG_CONSOLE_SCANF_MAX_LOG_LEN */
/*! @brief Debug console synchronization
* User should not change these macro for synchronization mode, but add the
* corresponding synchronization mechanism per different software environment.
* Such as, if another RTOS is used,
* add:
* #define DEBUG_CONSOLE_SYNCHRONIZATION_XXXX 3
* in this configuration file and implement the synchronization in fsl.log.c.
*/
/*! @brief synchronization for baremetal software */
#define DEBUG_CONSOLE_SYNCHRONIZATION_BM 0
/*! @brief synchronization for freertos software */
#define DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS 1
/*! @brief RTOS synchronization mechanism disable
* If not defined, default is enable, to avoid multitask log print mess.
* If other RTOS is used, you can implement the RTOS's specific synchronization mechanism in fsl.log.c
* If synchronization is disabled, log maybe messed on terminal.
*/
#ifndef DEBUG_CONSOLE_DISABLE_RTOS_SYNCHRONIZATION
#ifdef DEBUG_CONSOLE_TRANSFER_NON_BLOCKING
#ifdef FSL_RTOS_FREE_RTOS
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_FREERTOS
#else
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
#endif /* FSL_RTOS_FREE_RTOS */
#else
#define DEBUG_CONSOLE_SYNCHRONIZATION_MODE DEBUG_CONSOLE_SYNCHRONIZATION_BM
#endif /* DEBUG_CONSOLE_TRANSFER_NON_BLOCKING */
#endif /* DEBUG_CONSOLE_DISABLE_RTOS_SYNCHRONIZATION */
/*! @brief echo function support
* If you want to use the echo function,please define DEBUG_CONSOLE_ENABLE_ECHO
* at your project setting.
*/
#ifndef DEBUG_CONSOLE_ENABLE_ECHO
#define DEBUG_CONSOLE_ENABLE_ECHO_FUNCTION 0
#else
#define DEBUG_CONSOLE_ENABLE_ECHO_FUNCTION 1
#endif /* DEBUG_CONSOLE_ENABLE_ECHO */
/*********************************************************************/
/***************Debug console other configuration*********************/
/*! @brief Definition to printf the float number. */
#ifndef PRINTF_FLOAT_ENABLE
#define PRINTF_FLOAT_ENABLE 0U
#endif /* PRINTF_FLOAT_ENABLE */
/*! @brief Definition to scanf the float number. */
#ifndef SCANF_FLOAT_ENABLE
#define SCANF_FLOAT_ENABLE 0U
#endif /* SCANF_FLOAT_ENABLE */
/*! @brief Definition to support advanced format specifier for printf. */
#ifndef PRINTF_ADVANCED_ENABLE
#define PRINTF_ADVANCED_ENABLE 0U
#endif /* PRINTF_ADVANCED_ENABLE */
/*! @brief Definition to support advanced format specifier for scanf. */
#ifndef SCANF_ADVANCED_ENABLE
#define SCANF_ADVANCED_ENABLE 0U
#endif /* SCANF_ADVANCED_ENABLE */
/*! @brief Definition to select virtual com(USB CDC) as the debug console. */
#ifndef BOARD_USE_VIRTUALCOM
#define BOARD_USE_VIRTUALCOM 0U
#endif
/*******************************************************************/
#endif /* _FSL_DEBUG_CONSOLE_CONF_H_ */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_device_registers.h
Executable
+36
View File
@@ -0,0 +1,36 @@
/*
* Copyright 2014-2016 Freescale Semiconductor, Inc.
* Copyright 2016-2018 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*
*/
#ifndef __FSL_DEVICE_REGISTERS_H__
#define __FSL_DEVICE_REGISTERS_H__
/*
* Include the cpu specific register header files.
*
* The CPU macro should be declared in the project or makefile.
*/
#if (defined(CPU_MIMXRT1052CVJ5B) || defined(CPU_MIMXRT1052CVL5B) || defined(CPU_MIMXRT1052DVJ6B) || \
defined(CPU_MIMXRT1052DVL6B))
#define MIMXRT1052_SERIES
/* CMSIS-style register definitions */
#include "MIMXRT1052.h"
/* CPU specific feature definitions */
#include "MIMXRT1052_features.h"
#else
#error "No valid CPU defined!"
#endif
#endif /* __FSL_DEVICE_REGISTERS_H__ */
/*******************************************************************************
* EOF
******************************************************************************/
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_enet.h
Executable
+1629
View File
File diff suppressed because it is too large Load Diff
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_gpio.h
Executable
+342
View File
@@ -0,0 +1,342 @@
/*
* Copyright (c) 2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FSL_GPIO_H_
#define _FSL_GPIO_H_
#include "fsl_common.h"
/*!
* @addtogroup gpio_driver
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief GPIO driver version 2.0.1. */
#define FSL_GPIO_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
/*@}*/
/*! @brief GPIO direction definition. */
typedef enum _gpio_pin_direction
{
kGPIO_DigitalInput = 0U, /*!< Set current pin as digital input.*/
kGPIO_DigitalOutput = 1U, /*!< Set current pin as digital output.*/
} gpio_pin_direction_t;
/*! @brief GPIO interrupt mode definition. */
typedef enum _gpio_interrupt_mode
{
kGPIO_NoIntmode = 0U, /*!< Set current pin general IO functionality.*/
kGPIO_IntLowLevel = 1U, /*!< Set current pin interrupt is low-level sensitive.*/
kGPIO_IntHighLevel = 2U, /*!< Set current pin interrupt is high-level sensitive.*/
kGPIO_IntRisingEdge = 3U, /*!< Set current pin interrupt is rising-edge sensitive.*/
kGPIO_IntFallingEdge = 4U, /*!< Set current pin interrupt is falling-edge sensitive.*/
kGPIO_IntRisingOrFallingEdge = 5U, /*!< Enable the edge select bit to override the ICR register's configuration.*/
} gpio_interrupt_mode_t;
/*! @brief GPIO Init structure definition. */
typedef struct _gpio_pin_config
{
gpio_pin_direction_t direction; /*!< Specifies the pin direction. */
uint8_t outputLogic; /*!< Set a default output logic, which has no use in input */
gpio_interrupt_mode_t
interruptMode; /*!< Specifies the pin interrupt mode, a value of @ref gpio_interrupt_mode_t. */
} gpio_pin_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @name GPIO Initialization and Configuration functions
* @{
*/
/*!
* @brief Initializes the GPIO peripheral according to the specified
* parameters in the initConfig.
*
* @param base GPIO base pointer.
* @param pin Specifies the pin number
* @param initConfig pointer to a @ref gpio_pin_config_t structure that
* contains the configuration information.
*/
void GPIO_PinInit(GPIO_Type *base, uint32_t pin, const gpio_pin_config_t *Config);
/*@}*/
/*!
* @name GPIO Reads and Write Functions
* @{
*/
/*!
* @brief Sets the output level of the individual GPIO pin to logic 1 or 0.
*
* @param base GPIO base pointer.
* @param pin GPIO port pin number.
* @param output GPIOpin output logic level.
* - 0: corresponding pin output low-logic level.
* - 1: corresponding pin output high-logic level.
*/
void GPIO_PinWrite(GPIO_Type *base, uint32_t pin, uint8_t output);
/*!
* @brief Sets the output level of the individual GPIO pin to logic 1 or 0.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PinWrite.
*/
static inline void GPIO_WritePinOutput(GPIO_Type *base, uint32_t pin, uint8_t output)
{
GPIO_PinWrite(base, pin, output);
}
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 1.
*
* @param base GPIO peripheral base pointer (GPIO1, GPIO2, GPIO3, and so on.)
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortSet(GPIO_Type *base, uint32_t mask)
{
#if (defined(FSL_FEATURE_IGPIO_HAS_DR_SET) && (FSL_FEATURE_IGPIO_HAS_DR_SET == 1))
base->DR_SET = mask;
#else
base->DR |= mask;
#endif /* FSL_FEATURE_IGPIO_HAS_DR_SET */
}
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 1.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PortSet.
*/
static inline void GPIO_SetPinsOutput(GPIO_Type *base, uint32_t mask)
{
GPIO_PortSet(base, mask);
}
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 0.
*
* @param base GPIO peripheral base pointer (GPIO1, GPIO2, GPIO3, and so on.)
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortClear(GPIO_Type *base, uint32_t mask)
{
#if (defined(FSL_FEATURE_IGPIO_HAS_DR_CLEAR) && (FSL_FEATURE_IGPIO_HAS_DR_CLEAR == 1))
base->DR_CLEAR = mask;
#else
base->DR &= ~mask;
#endif /* FSL_FEATURE_IGPIO_HAS_DR_CLEAR */
}
/*!
* @brief Sets the output level of the multiple GPIO pins to the logic 0.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PortClear.
*/
static inline void GPIO_ClearPinsOutput(GPIO_Type *base, uint32_t mask)
{
GPIO_PortClear(base, mask);
}
/*!
* @brief Reverses the current output logic of the multiple GPIO pins.
*
* @param base GPIO peripheral base pointer (GPIO1, GPIO2, GPIO3, and so on.)
* @param mask GPIO pin number macro
*/
static inline void GPIO_PortToggle(GPIO_Type *base, uint32_t mask)
{
#if (defined(FSL_FEATURE_IGPIO_HAS_DR_TOGGLE) && (FSL_FEATURE_IGPIO_HAS_DR_TOGGLE == 1))
base->DR_TOGGLE = mask;
#endif /* FSL_FEATURE_IGPIO_HAS_DR_TOGGLE */
}
/*!
* @brief Reads the current input value of the GPIO port.
*
* @param base GPIO base pointer.
* @param pin GPIO port pin number.
* @retval GPIO port input value.
*/
static inline uint32_t GPIO_PinRead(GPIO_Type *base, uint32_t pin)
{
assert(pin < 32);
return (((base->DR) >> pin) & 0x1U);
}
/*!
* @brief Reads the current input value of the GPIO port.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PinRead.
*/
static inline uint32_t GPIO_ReadPinInput(GPIO_Type *base, uint32_t pin)
{
return GPIO_PinRead(base, pin);
}
/*@}*/
/*!
* @name GPIO Reads Pad Status Functions
* @{
*/
/*!
* @brief Reads the current GPIO pin pad status.
*
* @param base GPIO base pointer.
* @param pin GPIO port pin number.
* @retval GPIO pin pad status value.
*/
static inline uint8_t GPIO_PinReadPadStatus(GPIO_Type *base, uint32_t pin)
{
assert(pin < 32);
return (uint8_t)(((base->PSR) >> pin) & 0x1U);
}
/*!
* @brief Reads the current GPIO pin pad status.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PinReadPadStatus.
*/
static inline uint8_t GPIO_ReadPadStatus(GPIO_Type *base, uint32_t pin)
{
return GPIO_PinReadPadStatus(base, pin);
}
/*@}*/
/*!
* @name Interrupts and flags management functions
* @{
*/
/*!
* @brief Sets the current pin interrupt mode.
*
* @param base GPIO base pointer.
* @param pin GPIO port pin number.
* @param pininterruptMode pointer to a @ref gpio_interrupt_mode_t structure
* that contains the interrupt mode information.
*/
void GPIO_PinSetInterruptConfig(GPIO_Type *base, uint32_t pin, gpio_interrupt_mode_t pinInterruptMode);
/*!
* @brief Sets the current pin interrupt mode.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PinSetInterruptConfig.
*/
static inline void GPIO_SetPinInterruptConfig(GPIO_Type *base, uint32_t pin, gpio_interrupt_mode_t pinInterruptMode)
{
GPIO_PinSetInterruptConfig(base, pin, pinInterruptMode);
}
/*!
* @brief Enables the specific pin interrupt.
*
* @param base GPIO base pointer.
* @param mask GPIO pin number macro.
*/
static inline void GPIO_PortEnableInterrupts(GPIO_Type *base, uint32_t mask)
{
base->IMR |= mask;
}
/*!
* @brief Enables the specific pin interrupt.
*
* @param base GPIO base pointer.
* @param mask GPIO pin number macro.
*/
static inline void GPIO_EnableInterrupts(GPIO_Type *base, uint32_t mask)
{
GPIO_PortEnableInterrupts(base, mask);
}
/*!
* @brief Disables the specific pin interrupt.
*
* @param base GPIO base pointer.
* @param mask GPIO pin number macro.
*/
static inline void GPIO_PortDisableInterrupts(GPIO_Type *base, uint32_t mask)
{
base->IMR &= ~mask;
}
/*!
* @brief Disables the specific pin interrupt.
* @deprecated Do not use this function. It has been superceded by @ref GPIO_PortDisableInterrupts.
*/
static inline void GPIO_DisableInterrupts(GPIO_Type *base, uint32_t mask)
{
GPIO_PortDisableInterrupts(base, mask);
}
/*!
* @brief Reads individual pin interrupt status.
*
* @param base GPIO base pointer.
* @retval current pin interrupt status flag.
*/
static inline uint32_t GPIO_PortGetInterruptFlags(GPIO_Type *base)
{
return base->ISR;
}
/*!
* @brief Reads individual pin interrupt status.
*
* @param base GPIO base pointer.
* @retval current pin interrupt status flag.
*/
static inline uint32_t GPIO_GetPinsInterruptFlags(GPIO_Type *base)
{
return GPIO_PortGetInterruptFlags(base);
}
/*!
* @brief Clears pin interrupt flag. Status flags are cleared by
* writing a 1 to the corresponding bit position.
*
* @param base GPIO base pointer.
* @param mask GPIO pin number macro.
*/
static inline void GPIO_PortClearInterruptFlags(GPIO_Type *base, uint32_t mask)
{
base->ISR = mask;
}
/*!
* @brief Clears pin interrupt flag. Status flags are cleared by
* writing a 1 to the corresponding bit position.
*
* @param base GPIO base pointer.
* @param mask GPIO pin number macro.
*/
static inline void GPIO_ClearPinsInterruptFlags(GPIO_Type *base, uint32_t mask)
{
GPIO_PortClearInterruptFlags(base, mask);
}
/*@}*/
#if defined(__cplusplus)
}
#endif
/*!
* @}
*/
#endif /* _FSL_GPIO_H_*/
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_iomuxc.h
Executable
+1260
View File
File diff suppressed because it is too large Load Diff
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/fsl_lpuart.h
Executable
+876
View File
@@ -0,0 +1,876 @@
/*
* Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
* Copyright 2016-2017 NXP
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/*
* Copyright (c) 2021 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file fsl_lpuart.h
* @brief fsl uart drivers
* @version 1.0
* @author AIIT XUOS Lab
* @date 2021.11.11
*/
#ifndef _FSL_LPUART_H_
#define _FSL_LPUART_H_
#include "fsl_common.h"
/*!
* @addtogroup lpuart_driver
* @{
*/
/*******************************************************************************
* Definitions
******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief LPUART driver version 2.2.6. */
#define FSL_LPUART_DRIVER_VERSION (MAKE_VERSION(2, 2, 6))
/*@}*/
/*! @brief Error codes for the LPUART driver. */
enum _lpuart_status
{
kStatus_LPUART_TxBusy = MAKE_STATUS(kStatusGroup_LPUART, 0), /*!< TX busy */
kStatus_LPUART_RxBusy = MAKE_STATUS(kStatusGroup_LPUART, 1), /*!< RX busy */
kStatus_LPUART_TxIdle = MAKE_STATUS(kStatusGroup_LPUART, 2), /*!< LPUART transmitter is idle. */
kStatus_LPUART_RxIdle = MAKE_STATUS(kStatusGroup_LPUART, 3), /*!< LPUART receiver is idle. */
kStatus_LPUART_TxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_LPUART, 4), /*!< TX FIFO watermark too large */
kStatus_LPUART_RxWatermarkTooLarge = MAKE_STATUS(kStatusGroup_LPUART, 5), /*!< RX FIFO watermark too large */
kStatus_LPUART_FlagCannotClearManually = MAKE_STATUS(kStatusGroup_LPUART, 6), /*!< Some flag can't manually clear */
kStatus_LPUART_Error = MAKE_STATUS(kStatusGroup_LPUART, 7), /*!< Error happens on LPUART. */
kStatus_LPUART_RxRingBufferOverrun =
MAKE_STATUS(kStatusGroup_LPUART, 8), /*!< LPUART RX software ring buffer overrun. */
kStatus_LPUART_RxHardwareOverrun = MAKE_STATUS(kStatusGroup_LPUART, 9), /*!< LPUART RX receiver overrun. */
kStatus_LPUART_NoiseError = MAKE_STATUS(kStatusGroup_LPUART, 10), /*!< LPUART noise error. */
kStatus_LPUART_FramingError = MAKE_STATUS(kStatusGroup_LPUART, 11), /*!< LPUART framing error. */
kStatus_LPUART_ParityError = MAKE_STATUS(kStatusGroup_LPUART, 12), /*!< LPUART parity error. */
kStatus_LPUART_BaudrateNotSupport =
MAKE_STATUS(kStatusGroup_LPUART, 13), /*!< Baudrate is not support in current clock source */
kStatus_LPUART_IdleLineDetected = MAKE_STATUS(kStatusGroup_LPUART, 14), /*!< IDLE flag. */
};
/*! @brief LPUART parity mode. */
typedef enum _lpuart_parity_mode
{
kLPUART_ParityDisabled = 0x0U, /*!< Parity disabled */
kLPUART_ParityEven = 0x2U, /*!< Parity enabled, type even, bit setting: PE|PT = 10 */
kLPUART_ParityOdd = 0x3U, /*!< Parity enabled, type odd, bit setting: PE|PT = 11 */
} lpuart_parity_mode_t;
/*! @brief LPUART data bits count. */
typedef enum _lpuart_data_bits
{
kLPUART_EightDataBits = 0x0U, /*!< Eight data bit */
#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT
kLPUART_SevenDataBits = 0x1U, /*!< Seven data bit */
#endif
} lpuart_data_bits_t;
/*! @brief LPUART stop bit count. */
typedef enum _lpuart_stop_bit_count
{
kLPUART_OneStopBit = 0U, /*!< One stop bit */
kLPUART_TwoStopBit = 1U, /*!< Two stop bits */
} lpuart_stop_bit_count_t;
#if defined(FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT) && FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT
/*! @brief LPUART transmit CTS source. */
typedef enum _lpuart_transmit_cts_source
{
kLPUART_CtsSourcePin = 0U, /*!< CTS resource is the LPUART_CTS pin. */
kLPUART_CtsSourceMatchResult = 1U, /*!< CTS resource is the match result. */
} lpuart_transmit_cts_source_t;
/*! @brief LPUART transmit CTS configure. */
typedef enum _lpuart_transmit_cts_config
{
kLPUART_CtsSampleAtStart = 0U, /*!< CTS input is sampled at the start of each character. */
kLPUART_CtsSampleAtIdle = 1U, /*!< CTS input is sampled when the transmitter is idle */
} lpuart_transmit_cts_config_t;
#endif
/*! @brief LPUART idle flag type defines when the receiver starts counting. */
typedef enum _lpuart_idle_type_select
{
kLPUART_IdleTypeStartBit = 0U, /*!< Start counting after a valid start bit. */
kLPUART_IdleTypeStopBit = 1U, /*!< Start counting after a stop bit. */
} lpuart_idle_type_select_t;
/*! @brief LPUART idle detected configuration.
* This structure defines the number of idle characters that must be received before
* the IDLE flag is set.
*/
typedef enum _lpuart_idle_config
{
kLPUART_IdleCharacter1 = 0U, /*!< the number of idle characters. */
kLPUART_IdleCharacter2 = 1U, /*!< the number of idle characters. */
kLPUART_IdleCharacter4 = 2U, /*!< the number of idle characters. */
kLPUART_IdleCharacter8 = 3U, /*!< the number of idle characters. */
kLPUART_IdleCharacter16 = 4U, /*!< the number of idle characters. */
kLPUART_IdleCharacter32 = 5U, /*!< the number of idle characters. */
kLPUART_IdleCharacter64 = 6U, /*!< the number of idle characters. */
kLPUART_IdleCharacter128 = 7U, /*!< the number of idle characters. */
} lpuart_idle_config_t;
/*!
* @brief LPUART interrupt configuration structure, default settings all disabled.
*
* This structure contains the settings for all LPUART interrupt configurations.
*/
enum _lpuart_interrupt_enable
{
#if defined(FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT
kLPUART_LinBreakInterruptEnable = (LPUART_BAUD_LBKDIE_MASK >> 8), /*!< LIN break detect. */
#endif
kLPUART_RxActiveEdgeInterruptEnable = (LPUART_BAUD_RXEDGIE_MASK >> 8), /*!< Receive Active Edge. */
kLPUART_TxDataRegEmptyInterruptEnable = (LPUART_CTRL_TIE_MASK), /*!< Transmit data register empty. */
kLPUART_TransmissionCompleteInterruptEnable = (LPUART_CTRL_TCIE_MASK), /*!< Transmission complete. */
kLPUART_RxDataRegFullInterruptEnable = (LPUART_CTRL_RIE_MASK), /*!< Receiver data register full. */
kLPUART_IdleLineInterruptEnable = (LPUART_CTRL_ILIE_MASK), /*!< Idle line. */
kLPUART_RxOverrunInterruptEnable = (LPUART_CTRL_ORIE_MASK), /*!< Receiver Overrun. */
kLPUART_NoiseErrorInterruptEnable = (LPUART_CTRL_NEIE_MASK), /*!< Noise error flag. */
kLPUART_FramingErrorInterruptEnable = (LPUART_CTRL_FEIE_MASK), /*!< Framing error flag. */
kLPUART_ParityErrorInterruptEnable = (LPUART_CTRL_PEIE_MASK), /*!< Parity error flag. */
#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO
kLPUART_TxFifoOverflowInterruptEnable = (LPUART_FIFO_TXOFE_MASK >> 8), /*!< Transmit FIFO Overflow. */
kLPUART_RxFifoUnderflowInterruptEnable = (LPUART_FIFO_RXUFE_MASK >> 8), /*!< Receive FIFO Underflow. */
#endif
};
/*!
* @brief LPUART status flags.
*
* This provides constants for the LPUART status flags for use in the LPUART functions.
*/
enum _lpuart_flags
{
kLPUART_TxDataRegEmptyFlag =
(LPUART_STAT_TDRE_MASK), /*!< Transmit data register empty flag, sets when transmit buffer is empty */
kLPUART_TransmissionCompleteFlag =
(LPUART_STAT_TC_MASK), /*!< Transmission complete flag, sets when transmission activity complete */
kLPUART_RxDataRegFullFlag =
(LPUART_STAT_RDRF_MASK), /*!< Receive data register full flag, sets when the receive data buffer is full */
kLPUART_IdleLineFlag = (LPUART_STAT_IDLE_MASK), /*!< Idle line detect flag, sets when idle line detected */
kLPUART_RxOverrunFlag = (LPUART_STAT_OR_MASK), /*!< Receive Overrun, sets when new data is received before data is
read from receive register */
kLPUART_NoiseErrorFlag = (LPUART_STAT_NF_MASK), /*!< Receive takes 3 samples of each received bit. If any of these
samples differ, noise flag sets */
kLPUART_FramingErrorFlag =
(LPUART_STAT_FE_MASK), /*!< Frame error flag, sets if logic 0 was detected where stop bit expected */
kLPUART_ParityErrorFlag = (LPUART_STAT_PF_MASK), /*!< If parity enabled, sets upon parity error detection */
#if defined(FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT) && FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT
kLPUART_LinBreakFlag =
(int)(LPUART_STAT_LBKDIF_MASK), /*!< LIN break detect interrupt flag, sets when LIN break char
detected and LIN circuit enabled */
#endif
kLPUART_RxActiveEdgeFlag =
(LPUART_STAT_RXEDGIF_MASK), /*!< Receive pin active edge interrupt flag, sets when active edge detected */
kLPUART_RxActiveFlag =
(LPUART_STAT_RAF_MASK), /*!< Receiver Active Flag (RAF), sets at beginning of valid start bit */
#if defined(FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING) && FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING
kLPUART_DataMatch1Flag = LPUART_STAT_MA1F_MASK, /*!< The next character to be read from LPUART_DATA matches MA1*/
kLPUART_DataMatch2Flag = LPUART_STAT_MA2F_MASK, /*!< The next character to be read from LPUART_DATA matches MA2*/
#endif
#if defined(FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS) && FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS
kLPUART_NoiseErrorInRxDataRegFlag =
(LPUART_DATA_NOISY_MASK >> 10), /*!< NOISY bit, sets if noise detected in current data word */
kLPUART_ParityErrorInRxDataRegFlag =
(LPUART_DATA_PARITYE_MASK >> 10), /*!< PARITYE bit, sets if noise detected in current data word */
#endif
#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO
kLPUART_TxFifoEmptyFlag = (LPUART_FIFO_TXEMPT_MASK >> 16), /*!< TXEMPT bit, sets if transmit buffer is empty */
kLPUART_RxFifoEmptyFlag = (LPUART_FIFO_RXEMPT_MASK >> 16), /*!< RXEMPT bit, sets if receive buffer is empty */
kLPUART_TxFifoOverflowFlag =
(LPUART_FIFO_TXOF_MASK >> 16), /*!< TXOF bit, sets if transmit buffer overflow occurred */
kLPUART_RxFifoUnderflowFlag =
(LPUART_FIFO_RXUF_MASK >> 16), /*!< RXUF bit, sets if receive buffer underflow occurred */
#endif
};
/*! @brief LPUART configuration structure. */
typedef struct _lpuart_config
{
uint32_t baudRate_Bps; /*!< LPUART baud rate */
lpuart_parity_mode_t parityMode; /*!< Parity mode, disabled (default), even, odd */
lpuart_data_bits_t dataBitsCount; /*!< Data bits count, eight (default), seven */
bool isMsb; /*!< Data bits order, LSB (default), MSB */
#if defined(FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT) && FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT
lpuart_stop_bit_count_t stopBitCount; /*!< Number of stop bits, 1 stop bit (default) or 2 stop bits */
#endif
#if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO
uint8_t txFifoWatermark; /*!< TX FIFO watermark */
uint8_t rxFifoWatermark; /*!< RX FIFO watermark */
#endif
#if defined(FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT) && FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT
bool enableRxRTS; /*!< RX RTS enable */
bool enableTxCTS; /*!< TX CTS enable */
lpuart_transmit_cts_source_t txCtsSource; /*!< TX CTS source */
lpuart_transmit_cts_config_t txCtsConfig; /*!< TX CTS configure */
#endif
lpuart_idle_type_select_t rxIdleType; /*!< RX IDLE type. */
lpuart_idle_config_t rxIdleConfig; /*!< RX IDLE configuration. */
bool enableTx; /*!< Enable TX */
bool enableRx; /*!< Enable RX */
} lpuart_config_t;
/*! @brief LPUART transfer structure. */
typedef struct _lpuart_transfer
{
uint8_t *data; /*!< The buffer of data to be transfer.*/
size_t dataSize; /*!< The byte count to be transfer. */
} lpuart_transfer_t;
/* Forward declaration of the handle typedef. */
typedef struct _lpuart_handle lpuart_handle_t;
/*! @brief LPUART transfer callback function. */
typedef void (*lpuart_transfer_callback_t)(LPUART_Type *base, lpuart_handle_t *handle, status_t status, void *userData);
/*! @brief LPUART handle structure. */
struct _lpuart_handle
{
uint8_t *volatile txData; /*!< Address of remaining data to send. */
volatile size_t txDataSize; /*!< Size of the remaining data to send. */
size_t txDataSizeAll; /*!< Size of the data to send out. */
uint8_t *volatile rxData; /*!< Address of remaining data to receive. */
volatile size_t rxDataSize; /*!< Size of the remaining data to receive. */
size_t rxDataSizeAll; /*!< Size of the data to receive. */
uint8_t *rxRingBuffer; /*!< Start address of the receiver ring buffer. */
size_t rxRingBufferSize; /*!< Size of the ring buffer. */
volatile uint16_t rxRingBufferHead; /*!< Index for the driver to store received data into ring buffer. */
volatile uint16_t rxRingBufferTail; /*!< Index for the user to get data from the ring buffer. */
lpuart_transfer_callback_t callback; /*!< Callback function. */
void *userData; /*!< LPUART callback function parameter.*/
volatile uint8_t txState; /*!< TX transfer state. */
volatile uint8_t rxState; /*!< RX transfer state. */
#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT
bool isSevenDataBits; /*!< Seven data bits flag. */
#endif
};
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif /* _cplusplus */
#if defined(FSL_FEATURE_LPUART_HAS_GLOBAL) && FSL_FEATURE_LPUART_HAS_GLOBAL
/*!
* @name Software Reset
* @{
*/
/*!
* @brief Resets the LPUART using software.
*
* This function resets all internal logic and registers except the Global Register.
* Remains set until cleared by software.
*
* @param base LPUART peripheral base address.
*/
static inline void LPUART_SoftwareReset(LPUART_Type *base)
{
base->GLOBAL |= LPUART_GLOBAL_RST_MASK;
base->GLOBAL &= ~LPUART_GLOBAL_RST_MASK;
}
/* @} */
#endif /*FSL_FEATURE_LPUART_HAS_GLOBAL*/
/*!
* @name Initialization and deinitialization
* @{
*/
/*!
* @brief Initializes an LPUART instance with the user configuration structure and the peripheral clock.
*
* This function configures the LPUART module with user-defined settings. Call the LPUART_GetDefaultConfig() function
* to configure the configuration structure and get the default configuration.
* The example below shows how to use this API to configure the LPUART.
* @code
* lpuart_config_t lpuartConfig;
* lpuartConfig.baudRate_Bps = 115200U;
* lpuartConfig.parityMode = kLPUART_ParityDisabled;
* lpuartConfig.dataBitsCount = kLPUART_EightDataBits;
* lpuartConfig.isMsb = false;
* lpuartConfig.stopBitCount = kLPUART_OneStopBit;
* lpuartConfig.txFifoWatermark = 0;
* lpuartConfig.rxFifoWatermark = 1;
* LPUART_Init(LPUART1, &lpuartConfig, 20000000U);
* @endcode
*
* @param base LPUART peripheral base address.
* @param config Pointer to a user-defined configuration structure.
* @param srcClock_Hz LPUART clock source frequency in HZ.
* @retval kStatus_LPUART_BaudrateNotSupport Baudrate is not support in current clock source.
* @retval kStatus_Success LPUART initialize succeed
*/
status_t LPUART_Init(LPUART_Type *base, const lpuart_config_t *config, uint32_t srcClock_Hz);
/*!
* @brief Deinitializes a LPUART instance.
*
* This function waits for transmit to complete, disables TX and RX, and disables the LPUART clock.
*
* @param base LPUART peripheral base address.
*/
void LPUART_Deinit(LPUART_Type *base);
/*!
* @brief Gets the default configuration structure.
*
* This function initializes the LPUART configuration structure to a default value. The default
* values are:
* lpuartConfig->baudRate_Bps = 115200U;
* lpuartConfig->parityMode = kLPUART_ParityDisabled;
* lpuartConfig->dataBitsCount = kLPUART_EightDataBits;
* lpuartConfig->isMsb = false;
* lpuartConfig->stopBitCount = kLPUART_OneStopBit;
* lpuartConfig->txFifoWatermark = 0;
* lpuartConfig->rxFifoWatermark = 1;
* lpuartConfig->rxIdleType = kLPUART_IdleTypeStartBit;
* lpuartConfig->rxIdleConfig = kLPUART_IdleCharacter1;
* lpuartConfig->enableTx = false;
* lpuartConfig->enableRx = false;
*
* @param config Pointer to a configuration structure.
*/
void LPUART_GetDefaultConfig(lpuart_config_t *config);
/*!
* @brief Sets the LPUART instance baudrate.
*
* This function configures the LPUART module baudrate. This function is used to update
* the LPUART module baudrate after the LPUART module is initialized by the LPUART_Init.
* @code
* LPUART_SetBaudRate(LPUART1, 115200U, 20000000U);
* @endcode
*
* @param base LPUART peripheral base address.
* @param baudRate_Bps LPUART baudrate to be set.
* @param srcClock_Hz LPUART clock source frequency in HZ.
* @retval kStatus_LPUART_BaudrateNotSupport Baudrate is not supported in the current clock source.
* @retval kStatus_Success Set baudrate succeeded.
*/
status_t LPUART_SetBaudRate(LPUART_Type *base, uint32_t baudRate_Bps, uint32_t srcClock_Hz);
/* @} */
/*!
* @name Status
* @{
*/
/*!
* @brief Gets LPUART status flags.
*
* This function gets all LPUART status flags. The flags are returned as the logical
* OR value of the enumerators @ref _lpuart_flags. To check for a specific status,
* compare the return value with enumerators in the @ref _lpuart_flags.
* For example, to check whether the TX is empty:
* @code
* if (kLPUART_TxDataRegEmptyFlag & LPUART_GetStatusFlags(LPUART1))
* {
* ...
* }
* @endcode
*
* @param base LPUART peripheral base address.
* @return LPUART status flags which are ORed by the enumerators in the _lpuart_flags.
*/
uint32_t LPUART_GetStatusFlags(LPUART_Type *base);
/*!
* @brief Clears status flags with a provided mask.
*
* This function clears LPUART status flags with a provided mask. Automatically cleared flags
* can't be cleared by this function.
* Flags that can only cleared or set by hardware are:
* kLPUART_TxDataRegEmptyFlag, kLPUART_TransmissionCompleteFlag, kLPUART_RxDataRegFullFlag,
* kLPUART_RxActiveFlag, kLPUART_NoiseErrorInRxDataRegFlag, kLPUART_ParityErrorInRxDataRegFlag,
* kLPUART_TxFifoEmptyFlag,kLPUART_RxFifoEmptyFlag
* Note: This API should be called when the Tx/Rx is idle, otherwise it takes no effects.
*
* @param base LPUART peripheral base address.
* @param mask the status flags to be cleared. The user can use the enumerators in the
* _lpuart_status_flag_t to do the OR operation and get the mask.
* @return 0 succeed, others failed.
* @retval kStatus_LPUART_FlagCannotClearManually The flag can't be cleared by this function but
* it is cleared automatically by hardware.
* @retval kStatus_Success Status in the mask are cleared.
*/
status_t LPUART_ClearStatusFlags(LPUART_Type *base, uint32_t mask);
/* @} */
/*!
* @name Interrupts
* @{
*/
/*!
* @brief Enables LPUART interrupts according to a provided mask.
*
* This function enables the LPUART interrupts according to a provided mask. The mask
* is a logical OR of enumeration members. See the @ref _lpuart_interrupt_enable.
* This examples shows how to enable TX empty interrupt and RX full interrupt:
* @code
* LPUART_EnableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable);
* @endcode
*
* @param base LPUART peripheral base address.
* @param mask The interrupts to enable. Logical OR of @ref _uart_interrupt_enable.
*/
void LPUART_EnableInterrupts(LPUART_Type *base, uint32_t mask);
/*!
* @brief Disables LPUART interrupts according to a provided mask.
*
* This function disables the LPUART interrupts according to a provided mask. The mask
* is a logical OR of enumeration members. See @ref _lpuart_interrupt_enable.
* This example shows how to disable the TX empty interrupt and RX full interrupt:
* @code
* LPUART_DisableInterrupts(LPUART1,kLPUART_TxDataRegEmptyInterruptEnable | kLPUART_RxDataRegFullInterruptEnable);
* @endcode
*
* @param base LPUART peripheral base address.
* @param mask The interrupts to disable. Logical OR of @ref _lpuart_interrupt_enable.
*/
void LPUART_DisableInterrupts(LPUART_Type *base, uint32_t mask);
/*!
* @brief Gets enabled LPUART interrupts.
*
* This function gets the enabled LPUART interrupts. The enabled interrupts are returned
* as the logical OR value of the enumerators @ref _lpuart_interrupt_enable. To check
* a specific interrupt enable status, compare the return value with enumerators
* in @ref _lpuart_interrupt_enable.
* For example, to check whether the TX empty interrupt is enabled:
* @code
* uint32_t enabledInterrupts = LPUART_GetEnabledInterrupts(LPUART1);
*
* if (kLPUART_TxDataRegEmptyInterruptEnable & enabledInterrupts)
* {
* ...
* }
* @endcode
*
* @param base LPUART peripheral base address.
* @return LPUART interrupt flags which are logical OR of the enumerators in @ref _lpuart_interrupt_enable.
*/
uint32_t LPUART_GetEnabledInterrupts(LPUART_Type *base);
#if defined(FSL_FEATURE_LPUART_HAS_DMA_ENABLE) && FSL_FEATURE_LPUART_HAS_DMA_ENABLE
/*!
* @brief Gets the LPUART data register address.
*
* This function returns the LPUART data register address, which is mainly used by the DMA/eDMA.
*
* @param base LPUART peripheral base address.
* @return LPUART data register addresses which are used both by the transmitter and receiver.
*/
static inline uint32_t LPUART_GetDataRegisterAddress(LPUART_Type *base)
{
return (uint32_t) & (base->DATA);
}
/*!
* @brief Enables or disables the LPUART transmitter DMA request.
*
* This function enables or disables the transmit data register empty flag, STAT[TDRE], to generate DMA requests.
*
* @param base LPUART peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void LPUART_EnableTxDMA(LPUART_Type *base, bool enable)
{
if (enable)
{
base->BAUD |= LPUART_BAUD_TDMAE_MASK;
}
else
{
base->BAUD &= ~LPUART_BAUD_TDMAE_MASK;
}
}
/*!
* @brief Enables or disables the LPUART receiver DMA.
*
* This function enables or disables the receiver data register full flag, STAT[RDRF], to generate DMA requests.
*
* @param base LPUART peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void LPUART_EnableRxDMA(LPUART_Type *base, bool enable)
{
if (enable)
{
base->BAUD |= LPUART_BAUD_RDMAE_MASK;
}
else
{
base->BAUD &= ~LPUART_BAUD_RDMAE_MASK;
}
}
/* @} */
#endif /* FSL_FEATURE_LPUART_HAS_DMA_ENABLE */
/*!
* @name Bus Operations
* @{
*/
/*!
* @brief Get the LPUART instance from peripheral base address.
*
* @param base LPUART peripheral base address.
* @return LPUART instance.
*/
uint32_t LPUART_GetInstance(LPUART_Type *base);
/*!
* @brief Enables or disables the LPUART transmitter.
*
* This function enables or disables the LPUART transmitter.
*
* @param base LPUART peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void LPUART_EnableTx(LPUART_Type *base, bool enable)
{
if (enable)
{
base->CTRL |= LPUART_CTRL_TE_MASK;
}
else
{
base->CTRL &= ~LPUART_CTRL_TE_MASK;
}
}
/*!
* @brief Enables or disables the LPUART receiver.
*
* This function enables or disables the LPUART receiver.
*
* @param base LPUART peripheral base address.
* @param enable True to enable, false to disable.
*/
static inline void LPUART_EnableRx(LPUART_Type *base, bool enable)
{
if (enable)
{
base->CTRL |= LPUART_CTRL_RE_MASK;
}
else
{
base->CTRL &= ~LPUART_CTRL_RE_MASK;
}
}
/*!
* @brief Writes to the transmitter register.
*
* This function writes data to the transmitter register directly. The upper layer must
* ensure that the TX register is empty or that the TX FIFO has room before calling this function.
*
* @param base LPUART peripheral base address.
* @param data Data write to the TX register.
*/
static inline void LPUART_WriteByte(LPUART_Type *base, uint8_t data)
{
base->DATA = data;
}
/*!
* @brief Reads the receiver register.
*
* This function reads data from the receiver register directly. The upper layer must
* ensure that the receiver register is full or that the RX FIFO has data before calling this function.
*
* @param base LPUART peripheral base address.
* @return Data read from data register.
*/
static inline uint8_t LPUART_ReadByte(LPUART_Type *base)
{
#if defined(FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT) && FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT
uint32_t ctrl = base->CTRL;
bool isSevenDataBits =
((ctrl & LPUART_CTRL_M7_MASK) ||
((!(ctrl & LPUART_CTRL_M7_MASK)) && (!(ctrl & LPUART_CTRL_M_MASK)) && (ctrl & LPUART_CTRL_PE_MASK)));
if (isSevenDataBits)
{
return (base->DATA & 0x7F);
}
else
{
return base->DATA;
}
#else
return base->DATA;
#endif
}
/*!
* @brief Writes to the transmitter register using a blocking method.
*
* This function polls the transmitter register, waits for the register to be empty or for TX FIFO to have
* room, and writes data to the transmitter buffer.
*
* @note This function does not check whether all data has been sent out to the bus.
* Before disabling the transmitter, check the kLPUART_TransmissionCompleteFlag to ensure that the transmit is
* finished.
*
* @param base LPUART peripheral base address.
* @param data Start address of the data to write.
* @param length Size of the data to write.
*/
void LPUART_WriteBlocking(LPUART_Type *base, const uint8_t *data, size_t length);
/*!
* @brief Reads the receiver data register using a blocking method.
*
* This function polls the receiver register, waits for the receiver register full or receiver FIFO
* has data, and reads data from the TX register.
*
* @param base LPUART peripheral base address.
* @param data Start address of the buffer to store the received data.
* @param length Size of the buffer.
* @retval kStatus_LPUART_RxHardwareOverrun Receiver overrun happened while receiving data.
* @retval kStatus_LPUART_NoiseError Noise error happened while receiving data.
* @retval kStatus_LPUART_FramingError Framing error happened while receiving data.
* @retval kStatus_LPUART_ParityError Parity error happened while receiving data.
* @retval kStatus_Success Successfully received all data.
*/
status_t LPUART_ReadBlocking(LPUART_Type *base, uint8_t *data, size_t length);
/* @} */
/*!
* @name Transactional
* @{
*/
/*!
* @brief Initializes the LPUART handle.
*
* This function initializes the LPUART handle, which can be used for other LPUART
* transactional APIs. Usually, for a specified LPUART instance,
* call this API once to get the initialized handle.
*
* The LPUART driver supports the "background" receiving, which means that user can set up
* an RX ring buffer optionally. Data received is stored into the ring buffer even when the
* user doesn't call the LPUART_TransferReceiveNonBlocking() API. If there is already data received
* in the ring buffer, the user can get the received data from the ring buffer directly.
* The ring buffer is disabled if passing NULL as @p ringBuffer.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param callback Callback function.
* @param userData User data.
*/
void LPUART_TransferCreateHandle(LPUART_Type *base,
lpuart_handle_t *handle,
lpuart_transfer_callback_t callback,
void *userData);
/*!
* @brief Transmits a buffer of data using the interrupt method.
*
* This function send data using an interrupt method. This is a non-blocking function, which
* returns directly without waiting for all data written to the transmitter register. When
* all data is written to the TX register in the ISR, the LPUART driver calls the callback
* function and passes the @ref kStatus_LPUART_TxIdle as status parameter.
*
* @note The kStatus_LPUART_TxIdle is passed to the upper layer when all data are written
* to the TX register. However, there is no check to ensure that all the data sent out. Before disabling the TX,
* check the kLPUART_TransmissionCompleteFlag to ensure that the transmit is finished.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param xfer LPUART transfer structure, see #lpuart_transfer_t.
* @retval kStatus_Success Successfully start the data transmission.
* @retval kStatus_LPUART_TxBusy Previous transmission still not finished, data not all written to the TX register.
* @retval kStatus_InvalidArgument Invalid argument.
*/
status_t LPUART_TransferSendNonBlocking(LPUART_Type *base, lpuart_handle_t *handle, lpuart_transfer_t *xfer);
/*!
* @brief Sets up the RX ring buffer.
*
* This function sets up the RX ring buffer to a specific UART handle.
*
* When the RX ring buffer is used, data received is stored into the ring buffer even when
* the user doesn't call the UART_TransferReceiveNonBlocking() API. If there is already data received
* in the ring buffer, the user can get the received data from the ring buffer directly.
*
* @note When using RX ring buffer, one byte is reserved for internal use. In other
* words, if @p ringBufferSize is 32, then only 31 bytes are used for saving data.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param ringBuffer Start address of ring buffer for background receiving. Pass NULL to disable the ring buffer.
* @param ringBufferSize size of the ring buffer.
*/
void LPUART_TransferStartRingBuffer(LPUART_Type *base,
lpuart_handle_t *handle,
uint8_t *ringBuffer,
size_t ringBufferSize);
/*!
* @brief Aborts the background transfer and uninstalls the ring buffer.
*
* This function aborts the background transfer and uninstalls the ring buffer.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
*/
void LPUART_TransferStopRingBuffer(LPUART_Type *base, lpuart_handle_t *handle);
/*!
* @brief Get the length of received data in RX ring buffer.
*
* @param handle LPUART handle pointer.
* @return Length of received data in RX ring buffer.
*/
size_t LPUART_TransferGetRxRingBufferLength(LPUART_Type *base, lpuart_handle_t *handle);
/*!
* @brief Aborts the interrupt-driven data transmit.
*
* This function aborts the interrupt driven data sending. The user can get the remainBtyes to find out
* how many bytes are not sent out.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
*/
void LPUART_TransferAbortSend(LPUART_Type *base, lpuart_handle_t *handle);
/*!
* @brief Gets the number of bytes that have been written to the LPUART transmitter register.
*
* This function gets the number of bytes that have been written to LPUART TX
* register by an interrupt method.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param count Send bytes count.
* @retval kStatus_NoTransferInProgress No send in progress.
* @retval kStatus_InvalidArgument Parameter is invalid.
* @retval kStatus_Success Get successfully through the parameter \p count;
*/
status_t LPUART_TransferGetSendCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count);
/*!
* @brief Receives a buffer of data using the interrupt method.
*
* This function receives data using an interrupt method. This is a non-blocking function
* which returns without waiting to ensure that all data are received.
* If the RX ring buffer is used and not empty, the data in the ring buffer is copied and
* the parameter @p receivedBytes shows how many bytes are copied from the ring buffer.
* After copying, if the data in the ring buffer is not enough for read, the receive
* request is saved by the LPUART driver. When the new data arrives, the receive request
* is serviced first. When all data is received, the LPUART driver notifies the upper layer
* through a callback function and passes a status parameter @ref kStatus_UART_RxIdle.
* For example, the upper layer needs 10 bytes but there are only 5 bytes in ring buffer.
* The 5 bytes are copied to xfer->data, which returns with the
* parameter @p receivedBytes set to 5. For the remaining 5 bytes, the newly arrived data is
* saved from xfer->data[5]. When 5 bytes are received, the LPUART driver notifies the upper layer.
* If the RX ring buffer is not enabled, this function enables the RX and RX interrupt
* to receive data to xfer->data. When all data is received, the upper layer is notified.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param xfer LPUART transfer structure, see #uart_transfer_t.
* @param receivedBytes Bytes received from the ring buffer directly.
* @retval kStatus_Success Successfully queue the transfer into the transmit queue.
* @retval kStatus_LPUART_RxBusy Previous receive request is not finished.
* @retval kStatus_InvalidArgument Invalid argument.
*/
status_t LPUART_TransferReceiveNonBlocking(LPUART_Type *base,
lpuart_handle_t *handle,
lpuart_transfer_t *xfer,
size_t *receivedBytes);
/*!
* @brief Aborts the interrupt-driven data receiving.
*
* This function aborts the interrupt-driven data receiving. The user can get the remainBytes to find out
* how many bytes not received yet.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
*/
void LPUART_TransferAbortReceive(LPUART_Type *base, lpuart_handle_t *handle);
/*!
* @brief Gets the number of bytes that have been received.
*
* This function gets the number of bytes that have been received.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
* @param count Receive bytes count.
* @retval kStatus_NoTransferInProgress No receive in progress.
* @retval kStatus_InvalidArgument Parameter is invalid.
* @retval kStatus_Success Get successfully through the parameter \p count;
*/
status_t LPUART_TransferGetReceiveCount(LPUART_Type *base, lpuart_handle_t *handle, uint32_t *count);
/*!
* @brief LPUART IRQ handle function.
*
* This function handles the LPUART transmit and receive IRQ request.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
*/
void LPUART_TransferHandleIRQ(LPUART_Type *base, lpuart_handle_t *handle);
/*!
* @brief LPUART Error IRQ handle function.
*
* This function handles the LPUART error IRQ request.
*
* @param base LPUART peripheral base address.
* @param handle LPUART handle pointer.
*/
void LPUART_TransferHandleErrorIRQ(LPUART_Type *base, lpuart_handle_t *handle);
/* @} */
#if defined(__cplusplus)
}
#endif
/*! @}*/
#endif /* _FSL_LPUART_H_ */
Ubiquitous/XiUOS/board/ok1052-c/third_party_driver/include/system_MIMXRT1052.h
Executable
+127
View File
@@ -0,0 +1,127 @@
/*
** ###################################################################
** Processors: MIMXRT1052CVJ5B
** MIMXRT1052CVL5B
** MIMXRT1052DVJ6B
** MIMXRT1052DVL6B
**
** Compilers: Freescale C/C++ for Embedded ARM
** GNU C Compiler
** IAR ANSI C/C++ Compiler for ARM
** Keil ARM C/C++ Compiler
** MCUXpresso Compiler
**
** Reference manual: IMXRT1050RM Rev.2.1, 12/2018
** Version: rev. 1.2, 2018-11-27
** Build: b181205
**
** Abstract:
** Provides a system configuration function and a global variable that
** contains the system frequency. It configures the device and initializes
** the oscillator (PLL) that is part of the microcontroller device.
**
** Copyright 2016 Freescale Semiconductor, Inc.
** Copyright 2016-2018 NXP
** All rights reserved.
**
** SPDX-License-Identifier: BSD-3-Clause
**
** http: www.nxp.com
** mail: support@nxp.com
**
** Revisions:
** - rev. 0.1 (2017-01-10)
** Initial version.
** - rev. 1.0 (2018-09-21)
** Update interrupt vector table and dma request source.
** Update register BEE_ADDR_OFFSET1's bitfield name to ADDR_OFFSET1.
** Split GPIO_COMBINED_IRQS to GPIO_COMBINED_LOW_IRQS and GPIO_COMBINED_HIGH_IRQS.
** - rev. 1.1 (2018-11-16)
** Update header files to align with IMXRT1050RM Rev.1.
** - rev. 1.2 (2018-11-27)
** Update header files to align with IMXRT1050RM Rev.2.1.
**
** ###################################################################
*/
/*!
* @file MIMXRT1052
* @version 1.2
* @date 2018-11-27
* @brief Device specific configuration file for MIMXRT1052 (header file)
*
* Provides a system configuration function and a global variable that contains
* the system frequency. It configures the device and initializes the oscillator
* (PLL) that is part of the microcontroller device.
*/
#ifndef _SYSTEM_MIMXRT1052_H_
#define _SYSTEM_MIMXRT1052_H_ /**< Symbol preventing repeated inclusion */
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#ifndef DISABLE_WDOG
#define DISABLE_WDOG 1
#endif
/* Define clock source values */
#define CPU_XTAL_CLK_HZ 24000000UL /* Value of the external crystal or oscillator clock frequency in Hz */
#define CPU_CLK1_HZ 0UL /* Value of the CLK1 (select the CLK1_N/CLK1_P as source) frequency in Hz */
/* If CLOCK1_P,CLOCK1_N is choose as the pll bypass clock source, please implement the CLKPN_FREQ define, otherwise 0 will be returned. */
#define DEFAULT_SYSTEM_CLOCK 528000000UL /* Default System clock value */
/**
* @brief System clock frequency (core clock)
*
* The system clock frequency supplied to the SysTick timer and the processor
* core clock. This variable can be used by the user application to setup the
* SysTick timer or configure other parameters. It may also be used by debugger to
* query the frequency of the debug timer or configure the trace clock speed
* SystemCoreClock is initialized with a correct predefined value.
*/
extern uint32_t SystemCoreClock;
/**
* @brief Setup the microcontroller system.
*
* Typically this function configures the oscillator (PLL) that is part of the
* microcontroller device. For systems with variable clock speed it also updates
* the variable SystemCoreClock. SystemInit is called from startup_device file.
*/
void SystemInit (void);
/**
* @brief Updates the SystemCoreClock variable.
*
* It must be called whenever the core clock is changed during program
* execution. SystemCoreClockUpdate() evaluates the clock register settings and calculates
* the current core clock.
*/
void SystemCoreClockUpdate (void);
/**
* @brief SystemInit function hook.
*
* This weak function allows to call specific initialization code during the
* SystemInit() execution.This can be used when an application specific code needs
* to be called as close to the reset entry as possible (for example the Multicore
* Manager MCMGR_EarlyInit() function call).
* NOTE: No global r/w variables can be used in this hook function because the
* initialization of these variables happens after this function.
*/
void SystemInitHook (void);
#ifdef __cplusplus
}
#endif
#endif /* _SYSTEM_MIMXRT1052_H_ */