forked from xuos/xiuos
feat add lora device e220 in connection framework from Liu_Weichao
it is OK
This commit is contained in:
xuedongliang
commit
03bfe85c2b
|
|
@ -24,8 +24,6 @@
|
|||
extern AdapterProductInfoType Ec200tAttach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_4G_NAME "4G"
|
||||
|
||||
static int Adapter4GRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -45,6 +45,15 @@ extern "C" {
|
|||
#define ADAPTER_DEBUG
|
||||
#endif
|
||||
|
||||
#define ADAPTER_4G_NAME "4G"
|
||||
#define ADAPTER_BLUETOOTH_NAME "bluetooth"
|
||||
#define ADAPTER_ETHERNET_NAME "ethernet"
|
||||
#define ADAPTER_ETHERCAT_NAME "ethercat"
|
||||
#define ADAPTER_LORA_NAME "lora"
|
||||
#define ADAPTER_NBIOT_NAME "nbiot"
|
||||
#define ADAPTER_WIFI_NAME "wifi"
|
||||
#define ADAPTER_ZIGBEE_NAME "zigbee"
|
||||
|
||||
struct Adapter;
|
||||
struct AdapterProductInfo;
|
||||
typedef struct Adapter *AdapterType;
|
||||
|
|
@ -108,6 +117,12 @@ enum IpType
|
|||
IPV6,
|
||||
};
|
||||
|
||||
struct AdapterData
|
||||
{
|
||||
uint32 len;
|
||||
uint8 *buffer;
|
||||
};
|
||||
|
||||
struct AdapterProductInfo
|
||||
{
|
||||
uint32_t functions;
|
||||
|
|
|
|||
|
|
@ -24,8 +24,6 @@
|
|||
extern AdapterProductInfoType Hc08Attach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_BLUETOOTH_NAME "bluetooth"
|
||||
|
||||
static int AdapterBlueToothRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -24,8 +24,6 @@
|
|||
extern AdapterProductInfoType Hfa21EthernetAttach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_ETHERNET_NAME "ethernet"
|
||||
|
||||
static int AdapterEthernetRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@
|
|||
extern AdapterProductInfoType Hfa21EthercatAttach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_ETHERCAT_NAME "ethercat"
|
||||
|
||||
/**
|
||||
* @description: clear the datagram in ethercat frame, do not free the frame itself, since it may be a memory space on stack
|
||||
* @param frame - ethercat frame pointer
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@
|
|||
// therefore, only the TCP/UDP datagrams are considered,
|
||||
// here EtherCAT is in fact an application layer protocol.
|
||||
|
||||
#define ADAPTER_ETHERNET_NAME "ethernet" //"wifi"
|
||||
// #define ADAPTER_ETHERNET_NAME "ethernet" //"wifi"
|
||||
EcatFrame ecat_data;
|
||||
static struct Adapter *ethernet;
|
||||
uint32_t self_address;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,10 @@
|
|||
config ADAPTER_SX1278
|
||||
bool "Using lora adapter device SX1278"
|
||||
default y
|
||||
default n
|
||||
|
||||
config ADAPTER_E220
|
||||
bool "Using lora adapter device E220-400T22S"
|
||||
default n
|
||||
|
||||
choice
|
||||
prompt "Lora device adapter select net role type "
|
||||
|
|
@ -16,7 +20,7 @@ endchoice
|
|||
if AS_LORA_GATEWAY_ROLE
|
||||
config ADAPTER_LORA_NET_ROLE_ID
|
||||
hex "if Lora device config as a gateway, set gateway net id"
|
||||
default "0x10"
|
||||
default "0xFF"
|
||||
endif
|
||||
|
||||
if AS_LORA_CLIENT_ROLE
|
||||
|
|
@ -28,3 +32,7 @@ endif
|
|||
if ADAPTER_SX1278
|
||||
source "$APP_DIR/Framework/connection/lora/sx1278/Kconfig"
|
||||
endif
|
||||
|
||||
if ADAPTER_E220
|
||||
source "$APP_DIR/Framework/connection/lora/e220/Kconfig"
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -8,9 +8,14 @@ endif
|
|||
|
||||
ifeq ($(CONFIG_ADD_XIZI_FETURES),y)
|
||||
SRC_FILES := adapter_lora.c
|
||||
|
||||
ifeq ($(CONFIG_ADAPTER_SX1278),y)
|
||||
SRC_DIR += sx1278
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ADAPTER_E220),y)
|
||||
SRC_DIR += e220
|
||||
endif
|
||||
include $(KERNEL_ROOT)/compiler.mk
|
||||
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -24,10 +24,13 @@
|
|||
extern AdapterProductInfoType Sx1278Attach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_LORA_NAME "lora"
|
||||
#define ADAPTER_LORA_CLIENT_NUM 6
|
||||
#define ADAPTER_LORA_DATA_LENGTH 128
|
||||
#define ADAPTER_LORA_RECV_DATA_LENGTH 256
|
||||
#ifdef ADAPTER_E220
|
||||
extern AdapterProductInfoType E220Attach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_LORA_CLIENT_NUM 255
|
||||
#define ADAPTER_LORA_DATA_LENGTH 256
|
||||
#define ADAPTER_LORA_RECV_DATA_LENGTH ADAPTER_LORA_DATA_LENGTH + 16
|
||||
|
||||
#define ADAPTER_LORA_DATA_HEAD 0x3C
|
||||
#define ADAPTER_LORA_NET_PANID 0x0102
|
||||
|
|
@ -164,13 +167,7 @@ static int LoraReceiveDataCheck(uint8 *data, uint16 length, struct LoraDataForma
|
|||
uint32 recv_data_length = 0;
|
||||
for ( i = 0; i < length; i ++) {
|
||||
if (ADAPTER_LORA_DATA_HEAD == data[i]) {
|
||||
#ifdef ADD_NUTTX_FETURES
|
||||
/*Big-Endian*/
|
||||
recv_data_length = (data[i + 4] & 0xFF) | ((data[i + 5] & 0xFF) << 8) | ((data[i + 6] & 0xFF) << 16) | ((data[i + 7] & 0xFF) << 24);
|
||||
#else
|
||||
/*Little-Endian*/
|
||||
recv_data_length = ((data[i + 4] & 0xFF) << 24) | ((data[i + 5] & 0xFF) << 16) | ((data[i + 6] & 0xFF) << 8) | (data[i + 7] & 0xFF);
|
||||
#endif
|
||||
if (sizeof(struct LoraDataFormat) == recv_data_length) {
|
||||
memcpy(recv_data, (uint8 *)(data + i), sizeof(struct LoraDataFormat));
|
||||
return 0;
|
||||
|
|
@ -422,7 +419,7 @@ static int LoraClientDataAnalyze(struct Adapter *adapter, void *send_buf, int le
|
|||
|
||||
LoraReceiveDataCheck(lora_recv_data, ADAPTER_LORA_RECV_DATA_LENGTH, client_recv_data);
|
||||
|
||||
printf("%s:client_recv_data\n",__func__);
|
||||
printf("%s:client_recv_data\n", __func__);
|
||||
printf("head 0x%x length %d panid 0x%x data_type 0x%x client_id 0x%x gateway_id 0x%x crc 0x%x\n",
|
||||
client_recv_data->flame_head, client_recv_data->length, client_recv_data->panid, client_recv_data->data_type,
|
||||
client_recv_data->client_id, client_recv_data->gateway_id, client_recv_data->crc16);
|
||||
|
|
@ -466,6 +463,7 @@ static int LoraClientDataAnalyze(struct Adapter *adapter, void *send_buf, int le
|
|||
static int LoraClientJoinNet(struct Adapter *adapter, unsigned short panid)
|
||||
{
|
||||
struct LoraDataFormat client_join_data;
|
||||
struct AdapterData priv_lora_net;
|
||||
|
||||
memset(&client_join_data, 0, sizeof(struct LoraDataFormat));
|
||||
|
||||
|
|
@ -476,12 +474,15 @@ static int LoraClientJoinNet(struct Adapter *adapter, unsigned short panid)
|
|||
client_join_data.client_id = adapter->net_role_id;
|
||||
client_join_data.crc16 = LoraCrc16((uint8 *)&client_join_data, sizeof(struct LoraDataFormat) - 2);
|
||||
|
||||
printf("%s:client_join_data\n",__func__);
|
||||
printf("%s:client_join_data\n", __func__);
|
||||
printf("head 0x%x length %d panid 0x%x data_type 0x%x client_id 0x%x gateway_id 0x%x crc 0x%x\n",
|
||||
client_join_data.flame_head, client_join_data.length, client_join_data.panid, client_join_data.data_type,
|
||||
client_join_data.client_id, client_join_data.gateway_id, client_join_data.crc16);
|
||||
|
||||
if (AdapterDeviceJoin(adapter, (uint8 *)&client_join_data) < 0) {
|
||||
priv_lora_net.len = sizeof(struct LoraDataFormat);
|
||||
priv_lora_net.buffer = (uint8 *)&client_join_data;
|
||||
|
||||
if (AdapterDeviceJoin(adapter, (uint8 *)&priv_lora_net) < 0) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
|
@ -495,18 +496,22 @@ static int LoraClientJoinNet(struct Adapter *adapter, unsigned short panid)
|
|||
*/
|
||||
static int LoraClientQuitNet(struct Adapter *adapter, unsigned short panid)
|
||||
{
|
||||
struct LoraDataFormat client_join_data;
|
||||
struct LoraDataFormat client_quit_data;
|
||||
struct AdapterData priv_lora_net;
|
||||
|
||||
memset(&client_join_data, 0, sizeof(struct LoraDataFormat));
|
||||
memset(&client_quit_data, 0, sizeof(struct LoraDataFormat));
|
||||
|
||||
client_join_data.flame_head = ADAPTER_LORA_DATA_HEAD;
|
||||
client_join_data.length = sizeof(struct LoraDataFormat);
|
||||
client_join_data.panid = panid;
|
||||
client_join_data.data_type = ADAPTER_LORA_DATA_TYPE_QUIT;
|
||||
client_join_data.client_id = adapter->net_role_id;
|
||||
client_join_data.crc16 = LoraCrc16((uint8 *)&client_join_data, sizeof(struct LoraDataFormat) - 2);
|
||||
client_quit_data.flame_head = ADAPTER_LORA_DATA_HEAD;
|
||||
client_quit_data.length = sizeof(struct LoraDataFormat);
|
||||
client_quit_data.panid = panid;
|
||||
client_quit_data.data_type = ADAPTER_LORA_DATA_TYPE_QUIT;
|
||||
client_quit_data.client_id = adapter->net_role_id;
|
||||
client_quit_data.crc16 = LoraCrc16((uint8 *)&client_quit_data, sizeof(struct LoraDataFormat) - 2);
|
||||
|
||||
if (AdapterDeviceDisconnect(adapter, (uint8 *)&client_join_data) < 0) {
|
||||
priv_lora_net.len = sizeof(struct LoraDataFormat);
|
||||
priv_lora_net.buffer = (uint8 *)&client_quit_data;
|
||||
|
||||
if (AdapterDeviceDisconnect(adapter, (uint8 *)&priv_lora_net) < 0) {
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
|
@ -620,7 +625,6 @@ static void *LoraGatewayTask(void *parameter)
|
|||
static void *LoraClientDataTask(void *parameter)
|
||||
{
|
||||
int i, ret = 0;
|
||||
int join_times = 10;
|
||||
struct Adapter *lora_adapter = (struct Adapter *)parameter;
|
||||
struct LoraClientParam *client = (struct LoraClientParam *)lora_adapter->adapter_param;
|
||||
|
||||
|
|
@ -786,6 +790,19 @@ int AdapterLoraInit(void)
|
|||
|
||||
#endif
|
||||
|
||||
#ifdef ADAPTER_E220
|
||||
AdapterProductInfoType product_info = E220Attach(adapter);
|
||||
if (!product_info) {
|
||||
printf("AdapterLoraInit e220 attach error\n");
|
||||
PrivFree(adapter);
|
||||
return -1;
|
||||
}
|
||||
|
||||
adapter->product_info_flag = 1;
|
||||
adapter->info = product_info;
|
||||
adapter->done = product_info->model_done;
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,44 @@
|
|||
config ADAPTER_LORA_E220
|
||||
string "E220-400T22S adapter name"
|
||||
default "e220"
|
||||
|
||||
if ADD_XIZI_FETURES
|
||||
config ADAPTER_E220_M0
|
||||
int "E220 M0 pin number"
|
||||
default "11"
|
||||
|
||||
config ADAPTER_E220_M1
|
||||
int "E220 M1 pin number"
|
||||
default "9"
|
||||
|
||||
config ADAPTER_E220_PIN_DRIVER
|
||||
string "E220 device pin driver path"
|
||||
default "/dev/pin_dev"
|
||||
|
||||
config ADAPTER_E220_DRIVER_EXTUART
|
||||
bool "Using extra uart to support lora"
|
||||
default y
|
||||
|
||||
config ADAPTER_E220_DRIVER
|
||||
string "E220 device uart driver path"
|
||||
default "/dev/uart1_dev1"
|
||||
depends on !ADAPTER_E220_DRIVER_EXTUART
|
||||
|
||||
if ADAPTER_E220_DRIVER_EXTUART
|
||||
config ADAPTER_E220_DRIVER
|
||||
string "E220 device extra uart driver path"
|
||||
default "/dev/extuart_dev3"
|
||||
|
||||
config ADAPTER_E220_DRIVER_EXT_PORT
|
||||
int "if E220 device using extuart, choose port"
|
||||
default "3"
|
||||
endif
|
||||
endif
|
||||
|
||||
if ADD_NUTTX_FETURES
|
||||
|
||||
endif
|
||||
|
||||
if ADD_RTTHREAD_FETURES
|
||||
|
||||
endif
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
SRC_FILES := e220.c
|
||||
|
||||
include $(KERNEL_ROOT)/compiler.mk
|
||||
|
|
@ -0,0 +1,536 @@
|
|||
/*
|
||||
* Copyright (c) 2020 AIIT XUOS Lab
|
||||
* XiUOS is licensed under Mulan PSL v2.
|
||||
* You can use this software according to the terms and conditions of the Mulan PSL v2.
|
||||
* You may obtain a copy of Mulan PSL v2 at:
|
||||
* http://license.coscl.org.cn/MulanPSL2
|
||||
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
|
||||
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
|
||||
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
|
||||
* See the Mulan PSL v2 for more details.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file e220.c
|
||||
* @brief Implement the connection E220-400T22S lora adapter function
|
||||
* @version 2.0
|
||||
* @author AIIT XUOS Lab
|
||||
* @date 2022.4.20
|
||||
*/
|
||||
|
||||
#include <adapter.h>
|
||||
|
||||
#define E220_GATEWAY_ADDRESS 0xFFFF
|
||||
#define E220_CHANNEL 0x04
|
||||
|
||||
#ifdef AS_LORA_GATEWAY_ROLE
|
||||
#define E220_ADDRESS E220_GATEWAY_ADDRESS
|
||||
#endif
|
||||
|
||||
#ifdef AS_LORA_CLIENT_ROLE
|
||||
#define E220_ADDRESS 0xFFFF
|
||||
#endif
|
||||
|
||||
#define E220_UART_BAUD_RATE 9600
|
||||
|
||||
enum E220LoraMode
|
||||
{
|
||||
DATA_TRANSFER_MODE = 0, //M1 : M0 = 0 : 0
|
||||
WOR_SEND_MODE, //M1 : M0 = 0 : 1
|
||||
WOR_RECEIVE_MODE, //M1 : M0 = 1 : 0
|
||||
CONFIGURE_MODE_MODE, //M1 : M0 = 1 : 1
|
||||
};
|
||||
|
||||
/**
|
||||
* @description: Config E220 work mode by set M1/M0 pin
|
||||
* @param mode Lora working mode
|
||||
* @return NULL
|
||||
*/
|
||||
static void E220LoraModeConfig(enum E220LoraMode mode)
|
||||
{
|
||||
//delay 1s , wait AUX ready
|
||||
PrivTaskDelay(1000);
|
||||
|
||||
int pin_fd;
|
||||
pin_fd = PrivOpen(ADAPTER_E220_PIN_DRIVER, O_RDWR);
|
||||
if (pin_fd < 0) {
|
||||
printf("open %s error\n", ADAPTER_E220_PIN_DRIVER);
|
||||
return;
|
||||
}
|
||||
|
||||
//Step1: config M0 and M1 GPIO
|
||||
struct PinParam pin_param;
|
||||
pin_param.cmd = GPIO_CONFIG_MODE;
|
||||
pin_param.mode = GPIO_CFG_OUTPUT;
|
||||
pin_param.pin = ADAPTER_E220_M0;
|
||||
|
||||
struct PrivIoctlCfg ioctl_cfg;
|
||||
ioctl_cfg.ioctl_driver_type = PIN_TYPE;
|
||||
ioctl_cfg.args = &pin_param;
|
||||
PrivIoctl(pin_fd, OPE_CFG, &ioctl_cfg);
|
||||
|
||||
pin_param.pin = ADAPTER_E220_M1;
|
||||
ioctl_cfg.args = &pin_param;
|
||||
PrivIoctl(pin_fd, OPE_CFG, &ioctl_cfg);
|
||||
|
||||
//Step2 : set M0 and M1 high or low
|
||||
struct PinStat pin_stat;
|
||||
|
||||
switch (mode)
|
||||
{
|
||||
case DATA_TRANSFER_MODE:
|
||||
pin_stat.pin = ADAPTER_E220_M1;
|
||||
pin_stat.val = GPIO_LOW;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
|
||||
pin_stat.pin = ADAPTER_E220_M0;
|
||||
pin_stat.val = GPIO_LOW;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
break;
|
||||
|
||||
case WOR_SEND_MODE:
|
||||
pin_stat.pin = ADAPTER_E220_M1;
|
||||
pin_stat.val = GPIO_LOW;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
|
||||
pin_stat.pin = ADAPTER_E220_M0;
|
||||
pin_stat.val = GPIO_HIGH;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
break;
|
||||
|
||||
case WOR_RECEIVE_MODE:
|
||||
pin_stat.pin = ADAPTER_E220_M1;
|
||||
pin_stat.val = GPIO_HIGH;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
|
||||
pin_stat.pin = ADAPTER_E220_M0;
|
||||
pin_stat.val = GPIO_LOW;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
break;
|
||||
|
||||
case CONFIGURE_MODE_MODE:
|
||||
pin_stat.pin = ADAPTER_E220_M1;
|
||||
pin_stat.val = GPIO_HIGH;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
|
||||
pin_stat.pin = ADAPTER_E220_M0;
|
||||
pin_stat.val = GPIO_HIGH;
|
||||
PrivWrite(pin_fd, &pin_stat, 1);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
PrivClose(pin_fd);
|
||||
|
||||
//delay 20ms , wait mode switch done
|
||||
PrivTaskDelay(20);
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: Switch baud rate to register bit
|
||||
* @param baud_rate - baud_rate
|
||||
* @return baud_rate_bit
|
||||
*/
|
||||
static uint8 E220BaudRateSwitch(uint32 baud_rate)
|
||||
{
|
||||
uint8 baud_rate_bit;
|
||||
|
||||
switch (baud_rate)
|
||||
{
|
||||
case 1200:
|
||||
baud_rate_bit = 0x0;
|
||||
break;
|
||||
|
||||
case 2400:
|
||||
baud_rate_bit = 0x1;
|
||||
break;
|
||||
|
||||
case 4800:
|
||||
baud_rate_bit = 0x2;
|
||||
break;
|
||||
|
||||
case 9600:
|
||||
baud_rate_bit = 0x3;
|
||||
break;
|
||||
|
||||
case 19200:
|
||||
baud_rate_bit = 0x4;
|
||||
break;
|
||||
|
||||
case 38400:
|
||||
baud_rate_bit = 0x5;
|
||||
break;
|
||||
|
||||
case 57600:
|
||||
baud_rate_bit = 0x6;
|
||||
break;
|
||||
|
||||
case 115200:
|
||||
baud_rate_bit = 0x7;
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return baud_rate_bit;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: Set E220 register, such as address、channel、baud rate...
|
||||
* @param adapter - lora adapter
|
||||
* @param address - address
|
||||
* @param channel - channel
|
||||
* @param baud_rate - baud_rate
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220SetRegisterParam(struct Adapter *adapter, uint16 address, uint8 channel, uint32 baud_rate)
|
||||
{
|
||||
int ret;
|
||||
uint8 buffer[50] = {0};
|
||||
uint8 baud_rate_bit = E220BaudRateSwitch(baud_rate);
|
||||
|
||||
E220LoraModeConfig(CONFIGURE_MODE_MODE);
|
||||
PrivTaskDelay(30);
|
||||
|
||||
buffer[0] = 0xC0; //write register order
|
||||
buffer[1] = 0x00; //register start-address
|
||||
buffer[2] = 0x08; //register length
|
||||
|
||||
buffer[3] = (address >> 8) & 0xFF; //high address
|
||||
buffer[4] = address & 0xFF; //low adderss
|
||||
|
||||
buffer[5] = ((baud_rate_bit << 5) & 0xE0) | 0x04;
|
||||
|
||||
buffer[6] = 0x00;
|
||||
buffer[7] = channel; //channel
|
||||
buffer[8] = 0x03;
|
||||
buffer[9] = 0; //high-cipher
|
||||
buffer[10] = 0; //low-cipher
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)buffer, 11);
|
||||
if(ret < 0){
|
||||
printf("E220SetRegisterParam send failed %d!\n", ret);
|
||||
}
|
||||
|
||||
PrivRead(adapter->fd, buffer, 11);
|
||||
|
||||
E220LoraModeConfig(DATA_TRANSFER_MODE);
|
||||
PrivTaskDelay(1000);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: Get E220 register, such as address、channel、baud rate...
|
||||
* @param buf - data buf
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220GetRegisterParam(uint8 *buf)
|
||||
{
|
||||
int ret;
|
||||
uint8 buffer[3] = {0};
|
||||
|
||||
struct Adapter *adapter = AdapterDeviceFindByName(ADAPTER_LORA_NAME);
|
||||
if (NULL == adapter) {
|
||||
printf("E220GetRegisterParam find lora adapter error\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
E220LoraModeConfig(CONFIGURE_MODE_MODE);
|
||||
PrivTaskDelay(30);
|
||||
|
||||
buffer[0] = 0xC1; //read register order
|
||||
buffer[1] = 0x00; //register start-address
|
||||
buffer[2] = 0x08; //register length
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)buffer, 3);
|
||||
if(ret < 0){
|
||||
printf("E220GetRegisterParam send failed %d!\n", ret);
|
||||
}
|
||||
|
||||
PrivRead(adapter->fd, buf, 11);
|
||||
|
||||
E220LoraModeConfig(DATA_TRANSFER_MODE);
|
||||
PrivTaskDelay(30);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: Open E220 uart function
|
||||
* @param adapter - Lora device pointer
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Open(struct Adapter *adapter)
|
||||
{
|
||||
/*step1: open e220 uart port*/
|
||||
adapter->fd = PrivOpen(ADAPTER_E220_DRIVER, O_RDWR);
|
||||
if (adapter->fd < 0) {
|
||||
printf("E220Open get uart %s fd error\n", ADAPTER_E220_DRIVER);
|
||||
return -1;
|
||||
}
|
||||
|
||||
struct SerialDataCfg cfg;
|
||||
memset(&cfg, 0 ,sizeof(struct SerialDataCfg));
|
||||
|
||||
cfg.serial_baud_rate = BAUD_RATE_9600;
|
||||
cfg.serial_data_bits = DATA_BITS_8;
|
||||
cfg.serial_stop_bits = STOP_BITS_1;
|
||||
cfg.serial_parity_mode = PARITY_NONE;
|
||||
cfg.serial_bit_order = BIT_ORDER_LSB;
|
||||
cfg.serial_invert_mode = NRZ_NORMAL;
|
||||
cfg.serial_buffer_size = SERIAL_RB_BUFSZ;
|
||||
|
||||
/*aiit board use ch438, so it needs more serial configuration*/
|
||||
#ifdef ADAPTER_E220_DRIVER_EXTUART
|
||||
cfg.ext_uart_no = ADAPTER_E220_DRIVER_EXT_PORT;
|
||||
cfg.port_configure = PORT_CFG_INIT;
|
||||
#endif
|
||||
|
||||
struct PrivIoctlCfg ioctl_cfg;
|
||||
ioctl_cfg.ioctl_driver_type = SERIAL_TYPE;
|
||||
ioctl_cfg.args = &cfg;
|
||||
|
||||
PrivIoctl(adapter->fd, OPE_INT, &ioctl_cfg);
|
||||
|
||||
E220SetRegisterParam(adapter, E220_ADDRESS, E220_CHANNEL, E220_UART_BAUD_RATE);
|
||||
|
||||
ADAPTER_DEBUG("E220Open done\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: Close E220 uart function
|
||||
* @param adapter - Lora device pointer
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Close(struct Adapter *adapter)
|
||||
{
|
||||
/*step1: close e220 uart port*/
|
||||
int ret;
|
||||
ret = PrivClose(adapter->fd);
|
||||
if(ret < 0) {
|
||||
printf("E220 close failed: %d!\n", ret);
|
||||
return -1;
|
||||
}
|
||||
|
||||
ADAPTER_DEBUG("E220 Close done\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: E220 ioctl function
|
||||
* @param adapter - Lora device pointer
|
||||
* @param cmd - ioctl cmd
|
||||
* @param args - iotl params
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Ioctl(struct Adapter *adapter, int cmd, void *args)
|
||||
{
|
||||
/*to do*/
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: E220 join lora net group function
|
||||
* @param adapter - Lora device pointer
|
||||
* @param priv_net_group - priv_net_group params
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Join(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0) {
|
||||
printf("E220 Join net group failed: %d!\n", ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: E220 send data function
|
||||
* @param adapter - Lora device pointer
|
||||
* @param buf - data buffers
|
||||
* @param len - data len
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Send(struct Adapter *adapter, const void *buf, size_t len)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)buf, len);
|
||||
if(ret < 0){
|
||||
printf("send failed %d!\n", ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: E220 receive data function
|
||||
* @param adapter - Lora device pointer
|
||||
* @param buf - data buffers
|
||||
* @param len - data len
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Recv(struct Adapter *adapter, void *buf, size_t len)
|
||||
{
|
||||
int recv_len, recv_len_continue;
|
||||
|
||||
uint8 *recv_buf = PrivMalloc(len);
|
||||
|
||||
recv_len = PrivRead(adapter->fd, recv_buf, len);
|
||||
while (recv_len < len) {
|
||||
recv_len_continue = PrivRead(adapter->fd, recv_buf + recv_len, len - recv_len);
|
||||
|
||||
recv_len += recv_len_continue;
|
||||
}
|
||||
|
||||
memcpy(buf, recv_buf, recv_len);
|
||||
|
||||
PrivFree(recv_buf);
|
||||
|
||||
return recv_len;
|
||||
}
|
||||
|
||||
/**
|
||||
* @description: E220 quit lora net group function
|
||||
* @param adapter - Lora device pointer
|
||||
* @param priv_net_group - priv_net_group params
|
||||
* @return success: 0, failure: -1
|
||||
*/
|
||||
static int E220Quit(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0){
|
||||
printf("E220 quit net group failed %d!\n", ret);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct PrivProtocolDone e220_done =
|
||||
{
|
||||
.open = E220Open,
|
||||
.close = E220Close,
|
||||
.ioctl = E220Ioctl,
|
||||
.setup = NULL,
|
||||
.setdown = NULL,
|
||||
.setaddr = NULL,
|
||||
.setdns = NULL,
|
||||
.setdhcp = NULL,
|
||||
.ping = NULL,
|
||||
.netstat = NULL,
|
||||
.join = E220Join,
|
||||
.send = E220Send,
|
||||
.recv = E220Recv,
|
||||
.quit = E220Quit,
|
||||
};
|
||||
|
||||
AdapterProductInfoType E220Attach(struct Adapter *adapter)
|
||||
{
|
||||
struct AdapterProductInfo *product_info = malloc(sizeof(struct AdapterProductInfo));
|
||||
if (!product_info) {
|
||||
printf("E220Attach malloc product_info error\n");
|
||||
return NULL;
|
||||
}
|
||||
|
||||
strncpy(product_info->model_name, ADAPTER_LORA_E220,sizeof(product_info->model_name));
|
||||
product_info->model_done = (void *)&e220_done;
|
||||
|
||||
return product_info;
|
||||
}
|
||||
|
||||
//###################TEST####################
|
||||
static void LoraOpen(void)
|
||||
{
|
||||
struct Adapter *adapter = AdapterDeviceFindByName(ADAPTER_LORA_NAME);
|
||||
if (NULL == adapter) {
|
||||
printf("LoraReceive find lora adapter error\n");
|
||||
return;
|
||||
}
|
||||
|
||||
E220Open(adapter);
|
||||
}
|
||||
|
||||
static void LoraRead(void *parameter)
|
||||
{
|
||||
int RevLen;
|
||||
uint8 i, cnt = 0;
|
||||
|
||||
uint8 buffer[256];
|
||||
|
||||
memset(buffer, 0, 256);
|
||||
|
||||
struct Adapter *adapter = AdapterDeviceFindByName(ADAPTER_LORA_NAME);
|
||||
if (NULL == adapter) {
|
||||
printf("LoraRead find lora adapter error\n");
|
||||
return;
|
||||
}
|
||||
|
||||
while (1)
|
||||
{
|
||||
KPrintf("ready to read lora data\n");
|
||||
|
||||
RevLen = E220Recv(adapter, buffer, 256);
|
||||
if (RevLen) {
|
||||
KPrintf("lora get data %u\n", RevLen);
|
||||
for (i = 0; i < RevLen; i ++) {
|
||||
printf("i %u data 0x%x\n", i, buffer[i]);
|
||||
}
|
||||
|
||||
memset(buffer, 0, 256);
|
||||
|
||||
PrivTaskDelay(1000);
|
||||
|
||||
cnt ++;
|
||||
E220Send(adapter, &cnt, 1);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static void LoraTest(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
LoraOpen();
|
||||
|
||||
int task_lora_read = KTaskCreate("task_lora_read", LoraRead, NONE, 2048, 10);
|
||||
ret = StartupKTask(task_lora_read);
|
||||
if (ret != EOK) {
|
||||
KPrintf("StartupKTask task_lora_read failed .\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
SHELL_EXPORT_CMD(SHELL_CMD_PERMISSION(0)|SHELL_CMD_TYPE(SHELL_TYPE_CMD_MAIN),
|
||||
LoraTest, LoraTest, lora send and receive message);
|
||||
|
||||
static void LoraSend(int argc, char *argv[])
|
||||
{
|
||||
struct Adapter *adapter = AdapterDeviceFindByName(ADAPTER_LORA_NAME);
|
||||
if (NULL == adapter) {
|
||||
printf("LoraRead find lora adapter error\n");
|
||||
return;
|
||||
}
|
||||
|
||||
char Msg[256] = {0};
|
||||
|
||||
if (argc == 2) {
|
||||
strncpy(Msg, argv[1], 256);
|
||||
|
||||
E220Send(adapter, Msg, strlen(Msg));
|
||||
}
|
||||
}
|
||||
SHELL_EXPORT_CMD(SHELL_CMD_PERMISSION(0)|SHELL_CMD_TYPE(SHELL_TYPE_CMD_MAIN),
|
||||
LoraSend, LoraSend, lora send message);
|
||||
|
|
@ -108,7 +108,9 @@ static int Sx1278Ioctl(struct Adapter *adapter, int cmd, void *args)
|
|||
static int Sx1278Join(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
ret = Sx127x_Nuttx_Write(adapter->fd, (void *)priv_net_group, 144);
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = Sx127x_Nuttx_Write(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0){
|
||||
printf("Sx1278 Join net group failed: %d!\n", ret);
|
||||
}
|
||||
|
|
@ -119,7 +121,9 @@ static int Sx1278Join(struct Adapter *adapter, unsigned char *priv_net_group)
|
|||
static int Sx1278Join(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group, 144);
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0){
|
||||
printf("Sx1278 Join net group failed: %d!\n", ret);
|
||||
}
|
||||
|
|
@ -196,7 +200,9 @@ static int Sx1278Recv(struct Adapter *adapter, void *buf, size_t len)
|
|||
static int Sx1278Quit(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
ret = Sx127x_Nuttx_Write(adapter->fd, (void *)priv_net_group, 144);
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = Sx127x_Nuttx_Write(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0){
|
||||
printf("Sx1278 quit net group failed %d!\n", ret);
|
||||
}
|
||||
|
|
@ -207,7 +213,9 @@ static int Sx1278Quit(struct Adapter *adapter, unsigned char *priv_net_group)
|
|||
static int Sx1278Quit(struct Adapter *adapter, unsigned char *priv_net_group)
|
||||
{
|
||||
int ret;
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group, 144);
|
||||
struct AdapterData *priv_net_group_data = (struct AdapterData *)priv_net_group;
|
||||
|
||||
ret = PrivWrite(adapter->fd, (void *)priv_net_group_data->buffer, priv_net_group_data->len);
|
||||
if(ret < 0){
|
||||
printf("Sx1278 quit net group failed %d!\n", ret);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -25,8 +25,6 @@
|
|||
extern AdapterProductInfoType BC28Attach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_NBIOT_NAME "nbiot"
|
||||
|
||||
static int AdapterNbiotRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -29,8 +29,6 @@ extern AdapterProductInfoType Hfa21WifiAttach(struct Adapter *adapter);
|
|||
extern AdapterProductInfoType Esp07sWifiAttach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_WIFI_NAME "wifi"
|
||||
|
||||
static int AdapterWifiRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -26,8 +26,6 @@
|
|||
extern AdapterProductInfoType E18Attach(struct Adapter *adapter);
|
||||
#endif
|
||||
|
||||
#define ADAPTER_ZIGBEE_NAME "zigbee"
|
||||
|
||||
static int AdapterZigbeeRegister(struct Adapter *adapter)
|
||||
{
|
||||
int ret = 0;
|
||||
|
|
|
|||
|
|
@ -629,7 +629,7 @@ void WriteCH438Block(uint8 maddr, uint8 mlen, uint8 *mbuf)
|
|||
** date:
|
||||
**-------------------------------------------------------------------------------------------------------
|
||||
********************************************************************************************************/
|
||||
void Ch438UartSend( uint8 ext_uart_no,uint8 *data, uint8 Num )
|
||||
void Ch438UartSend(uint8 ext_uart_no, uint8 *data, uint16 Num)
|
||||
{
|
||||
uint8 REG_LSR_ADDR,REG_THR_ADDR;
|
||||
|
||||
|
|
@ -958,10 +958,35 @@ static uint32 ImxrtCh438WriteData(void *dev, struct BusBlockWriteParam *write_pa
|
|||
NULL_PARAM_CHECK(dev);
|
||||
NULL_PARAM_CHECK(write_param);
|
||||
|
||||
int write_len, write_len_continue;
|
||||
int i, write_index;
|
||||
uint8 *write_buffer;
|
||||
|
||||
struct SerialHardwareDevice *serial_dev = (struct SerialHardwareDevice *)dev;
|
||||
struct SerialDevParam *dev_param = (struct SerialDevParam *)serial_dev->haldev.private_data;
|
||||
|
||||
Ch438UartSend(dev_param->ext_uart_no, (uint8 *)write_param->buffer, write_param->size);
|
||||
write_len = write_param->size;
|
||||
write_len_continue = write_param->size;
|
||||
write_buffer = (uint8 *)write_param->buffer;
|
||||
|
||||
if (write_len > 256) {
|
||||
if (0 == write_len % 256) {
|
||||
write_index = write_len / 256;
|
||||
for (i = 0; i < write_index; i ++) {
|
||||
Ch438UartSend(dev_param->ext_uart_no, write_buffer + i * 256, 256);
|
||||
}
|
||||
} else {
|
||||
write_index = 0;
|
||||
while (write_len_continue > 256) {
|
||||
Ch438UartSend(dev_param->ext_uart_no, write_buffer + write_index * 256, 256);
|
||||
write_index++;
|
||||
write_len_continue = write_len - write_index * 256;
|
||||
}
|
||||
Ch438UartSend(dev_param->ext_uart_no, write_buffer + write_index * 256, write_len_continue);
|
||||
}
|
||||
} else {
|
||||
Ch438UartSend(dev_param->ext_uart_no, write_buffer, write_len);
|
||||
}
|
||||
|
||||
return EOK;
|
||||
}
|
||||
|
|
@ -974,6 +999,7 @@ static uint32 ImxrtCh438ReadData(void *dev, struct BusBlockReadParam *read_param
|
|||
x_err_t result;
|
||||
uint8 rcv_num = 0;
|
||||
uint8 gInterruptStatus;
|
||||
uint8 interrupt_done = 0;
|
||||
uint8 InterruptStatus;
|
||||
static uint8 dat;
|
||||
uint8 REG_LCR_ADDR;
|
||||
|
|
@ -991,19 +1017,21 @@ static uint32 ImxrtCh438ReadData(void *dev, struct BusBlockReadParam *read_param
|
|||
struct SerialHardwareDevice *serial_dev = (struct SerialHardwareDevice *)dev;
|
||||
struct SerialDevParam *dev_param = (struct SerialDevParam *)serial_dev->haldev.private_data;
|
||||
|
||||
while (!interrupt_done) {
|
||||
result = KSemaphoreObtain(ch438_sem, WAITING_FOREVER);
|
||||
if (EOK == result) {
|
||||
gInterruptStatus = ReadCH438Data(REG_SSR_ADDR);
|
||||
if (!gInterruptStatus) {
|
||||
dat = ReadCH438Data(REG_LCR0_ADDR);
|
||||
dat = ReadCH438Data(REG_IER0_ADDR);
|
||||
dat = ReadCH438Data(REG_MCR0_ADDR);
|
||||
dat = ReadCH438Data(REG_LSR0_ADDR);
|
||||
dat = ReadCH438Data(REG_MSR0_ADDR);
|
||||
dat = ReadCH438Data(REG_RBR0_ADDR);
|
||||
dat = ReadCH438Data(REG_THR0_ADDR);
|
||||
dat = ReadCH438Data(REG_IIR0_ADDR);
|
||||
dat = dat ;
|
||||
// dat = ReadCH438Data(REG_LCR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_IER0_ADDR);
|
||||
// dat = ReadCH438Data(REG_MCR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_LSR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_MSR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_RBR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_THR0_ADDR);
|
||||
// dat = ReadCH438Data(REG_IIR0_ADDR);
|
||||
// dat = dat;
|
||||
interrupt_done = 0;
|
||||
} else {
|
||||
if (gInterruptStatus & interrupt_num[dev_param->ext_uart_no]) { /* check which uart port triggers interrupt*/
|
||||
REG_LCR_ADDR = offset_addr[dev_param->ext_uart_no] | REG_LCR0_ADDR;
|
||||
|
|
@ -1020,25 +1048,18 @@ static uint32 ImxrtCh438ReadData(void *dev, struct BusBlockReadParam *read_param
|
|||
|
||||
InterruptStatus = ReadCH438Data( REG_IIR_ADDR ) & 0x0f; /* read the status of the uart port*/
|
||||
|
||||
switch( InterruptStatus )
|
||||
{
|
||||
case INT_NOINT: /* NO INTERRUPT */
|
||||
break;
|
||||
case INT_THR_EMPTY: /* THR EMPTY INTERRUPT*/
|
||||
break;
|
||||
case INT_RCV_OVERTIME: /* RECV OVERTIME INTERRUPT*/
|
||||
case INT_RCV_SUCCESS: /* RECV INTERRUPT SUCCESSFULLY*/
|
||||
if ((INT_RCV_OVERTIME == InterruptStatus) || (INT_RCV_SUCCESS == InterruptStatus)) {
|
||||
rcv_num = Ch438UartRcv(dev_param->ext_uart_no, (uint8 *)read_param->buffer, read_param->size);
|
||||
read_param->read_length = rcv_num;
|
||||
break;
|
||||
case INT_RCV_LINES: /* RECV LINES INTERRUPT */
|
||||
ReadCH438Data( REG_LSR_ADDR );
|
||||
break;
|
||||
case INT_MODEM_CHANGE: /* MODEM CHANGE INTERRUPT */
|
||||
ReadCH438Data( REG_MSR_ADDR );
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
|
||||
interrupt_done = 1;
|
||||
|
||||
// int i;
|
||||
// uint8 *buffer = (uint8 *)read_param->buffer;
|
||||
// for (i = 0; i < rcv_num; i ++) {
|
||||
// KPrintf("Ch438UartRcv i %u data 0x%x\n", i, buffer[i]);
|
||||
// }
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ static int BusMatchDrvDev(struct Driver *driver, struct HardwareDev *device)
|
|||
NULL_PARAM_CHECK(device);
|
||||
|
||||
if(!strncmp(driver->owner_bus->bus_name, device->owner_bus->bus_name, NAME_NUM_MAX)) {
|
||||
KPrintf("BusMatchDrvDev match successfully, bus name %s\n", driver->owner_bus->bus_name);
|
||||
//KPrintf("BusMatchDrvDev match successfully, bus name %s\n", driver->owner_bus->bus_name);
|
||||
|
||||
driver->private_data = device->private_data;//driver get the device param
|
||||
device->owner_bus->owner_driver = driver;
|
||||
|
|
|
|||
Loading…
Reference in New Issue