autotest
/
xiuos
forked from xuos/xiuos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

xiuos\Ubiquitous\RT-Thread_Fusion_XiUOS\aiit_board\xidatong-arm32\board： 

1.Add ch438.c and ch438.h
2.include test function about ch438,hc08,lora,e18
This commit is contained in:
zhujiarui666 2022-08-09 10:54:50 +08:00
parent 7c30bd3601
commit e812b5a49f
2 changed files with 1736 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1323
Ubiquitous/RT-Thread_Fusion_XiUOS/aiit_board/xidatong-arm32/board/hardware/ch438/ch438.c Normal file
View File

File diff suppressed because it is too large Load Diff

413
Ubiquitous/RT-Thread_Fusion_XiUOS/aiit_board/xidatong-arm32/board/hardware/ch438/ch438.h Normal file
View File

@ -0,0 +1,413 @@
/*
* Copyright (c) 2020 AIIT XUOS Lab
* XiOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file imxrt_ch438.h
* @brief imxrt board sd card automount
* @version 1.0
* @author AIIT XUOS Lab
* @date 2022.04.26
*/
#ifndef __CH438_H
#define __CH438_H
#undef FAR
#undef NEAR
#define FAR
#define NEAR
/****************************************************************************
* Included Files
****************************************************************************/
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <errno.h>
#include <stddef.h>
#include <stdint.h>
#include <stdio.h>
#include <sched.h>
#include <assert.h>
#include <unistd.h>
#include <stdbool.h>
#include <string.h>
#include <stdlib.h>
#include <fcntl.h>
#include <rtdevice.h>
#include <rtthread.h>
#include <board.h>
#include "fsl_gpio.h"
#include "drv_gpio.h"
#include "MIMXRT1052.h"
/*self define*/
/* output pin */
#define CH438_D_GPIO GPIO1
#define ZIGBEE_GPIO GPIO2
#define CH438_CTL_GPIO GPIO3
#define CH438_INT_IRQ GPIO3_Combined_0_15_IRQn
#define CH438_INT_IRQ_HANDLER GPIO3_Combined_0_15_IRQHandler
/* ch438 ctl pin */
#define CH438_NWR 68
#define CH438_NRD 69
#define CH438_ALE 66
#define CH438_INT 67
/* ch438 r/w pin*/
#define CH438_D0 25
#define CH438_D1 24
#define CH438_D2 20
#define CH438_D3 21
#define CH438_D4 31
#define CH438_D5 28
#define CH438_D6 30
#define CH438_D7 29
#ifdef CONFIG_CH438_EXTUART0
#define EXTU_UART_0 "dev0"
#endif
#ifdef CONFIG_CH438_EXTUART1
#define EXTU_UART_1 "dev1"
#endif
#ifdef CONFIG_CH438_EXTUART2
#define EXTU_UART_2 "dev2"
#endif
#ifdef CONFIG_CH438_EXTUART3
#define EXTU_UART_3 "dev3"
#endif
#ifdef CONFIG_CH438_EXTUART4
#define EXTU_UART_4 "dev4"
#endif
#ifdef CONFIG_CH438_EXTUART5
#define EXTU_UART_5 "dev5"
#endif
#ifdef CONFIG_CH438_EXTUART6
#define EXTU_UART_6 "dev6"
#endif
#ifdef CONFIG_CH438_EXTUART7
#define EXTU_UART_7 "dev7"
#endif
#define ZIGBEE_MODE_PIN (11U)
#define CH438_D0_PIN (25U)
#define CH438_D1_PIN (24U)
#define CH438_D2_PIN (20U)
#define CH438_D3_PIN (21U)
#define CH438_D4_PIN (31U)
#define CH438_D5_PIN (28U)
#define CH438_D6_PIN (30U)
#define CH438_D7_PIN (29U)
#define CH438_NWR_PIN (4U)
#define CH438_NRD_PIN (5U)
#define CH438_ALE_PIN (2U)
#define CH438_INT_PIN (3U)
#define EXAMPLE_DELAY_COUNT 5000
#define CH438PORTNUM 8
#define CH438_BUFFSIZE 256
#define CH438_INCREMENT MSEC2TICK(33)
#define CONFIG_CH438_EXTUART0_BAUD 115200
#define CONFIG_CH438_EXTUART1_BAUD 115200
#define CONFIG_CH438_EXTUART2_BAUD 9600
#define CONFIG_CH438_EXTUART3_BAUD 9600
#define CONFIG_CH438_EXTUART4_BAUD 115200
#define CONFIG_CH438_EXTUART5_BAUD 115200
#define CONFIG_CH438_EXTUART6_BAUD 115200
#define CONFIG_CH438_EXTUART7_BAUD 9600
#define OK 0
#define ERROR 1
/* chip definition */
/* CH438serial port0 register address */
#define REG_RBR0_ADDR 0x00 /* serial port0receive buffer register address */
#define REG_THR0_ADDR 0x00 /* serial port0send hold register address */
#define REG_IER0_ADDR 0x01 /* serial port0interrupt enable register address */
#define REG_IIR0_ADDR 0x02 /* serial port0interrupt identifies register address */
#define REG_FCR0_ADDR 0x02 /* serial port0FIFO controls register address */
#define REG_LCR0_ADDR 0x03 /* serial port0circuit control register address */
#define REG_MCR0_ADDR 0x04 /* serial port0MODEM controls register address */
#define REG_LSR0_ADDR 0x05 /* serial port0line status register address */
#define REG_MSR0_ADDR 0x06 /* serial port0address of MODEM status register */
#define REG_SCR0_ADDR 0x07 /* serial port0the user can define the register address */
#define REG_DLL0_ADDR 0x00 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM0_ADDR 0x01 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port1 register address */
#define REG_RBR1_ADDR 0x10 /* serial port1receive buffer register address */
#define REG_THR1_ADDR 0x10 /* serial port1send hold register address */
#define REG_IER1_ADDR 0x11 /* serial port1interrupt enable register address */
#define REG_IIR1_ADDR 0x12 /* serial port1interrupt identifies register address */
#define REG_FCR1_ADDR 0x12 /* serial port1FIFO controls register address */
#define REG_LCR1_ADDR 0x13 /* serial port1circuit control register address */
#define REG_MCR1_ADDR 0x14 /* serial port1MODEM controls register address */
#define REG_LSR1_ADDR 0x15 /* serial port1line status register address */
#define REG_MSR1_ADDR 0x16 /* serial port1address of MODEM status register */
#define REG_SCR1_ADDR 0x17 /* serial port1the user can define the register address */
#define REG_DLL1_ADDR 0x10 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM1_ADDR 0x11 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port2 register address */
#define REG_RBR2_ADDR 0x20 /* serial port2receive buffer register address */
#define REG_THR2_ADDR 0x20 /* serial port2send hold register address */
#define REG_IER2_ADDR 0x21 /* serial port2interrupt enable register address */
#define REG_IIR2_ADDR 0x22 /* serial port2interrupt identifies register address */
#define REG_FCR2_ADDR 0x22 /* serial port2FIFO controls register address */
#define REG_LCR2_ADDR 0x23 /* serial port2circuit control register address */
#define REG_MCR2_ADDR 0x24 /* serial port2MODEM controls register address */
#define REG_LSR2_ADDR 0x25 /* serial port2line status register address */
#define REG_MSR2_ADDR 0x26 /* serial port2address of MODEM status register */
#define REG_SCR2_ADDR 0x27 /* serial port2the user can define the register address */
#define REG_DLL2_ADDR 0x20 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM2_ADDR 0x21 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port3 register address */
#define REG_RBR3_ADDR 0x30 /* serial port3receive buffer register address */
#define REG_THR3_ADDR 0x30 /* serial port3send hold register address */
#define REG_IER3_ADDR 0x31 /* serial port3interrupt enable register address */
#define REG_IIR3_ADDR 0x32 /* serial port3interrupt identifies register address */
#define REG_FCR3_ADDR 0x32 /* serial port3FIFO controls register address */
#define REG_LCR3_ADDR 0x33 /* serial port3circuit control register address */
#define REG_MCR3_ADDR 0x34 /* serial port3MODEM controls register address */
#define REG_LSR3_ADDR 0x35 /* serial port3line status register address */
#define REG_MSR3_ADDR 0x36 /* serial port3address of MODEM status register */
#define REG_SCR3_ADDR 0x37 /* serial port3the user can define the register address */
#define REG_DLL3_ADDR 0x30 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM3_ADDR 0x31 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port4 register address */
#define REG_RBR4_ADDR 0x08 /* serial port4receive buffer register address */
#define REG_THR4_ADDR 0x08 /* serial port4send hold register address */
#define REG_IER4_ADDR 0x09 /* serial port4interrupt enable register address */
#define REG_IIR4_ADDR 0x0A /* serial port4interrupt identifies register address */
#define REG_FCR4_ADDR 0x0A /* serial port4FIFO controls register address */
#define REG_LCR4_ADDR 0x0B /* serial port4circuit control register address */
#define REG_MCR4_ADDR 0x0C /* serial port4MODEM controls register address */
#define REG_LSR4_ADDR 0x0D /* serial port4line status register address */
#define REG_MSR4_ADDR 0x0E /* serial port4address of MODEM status register */
#define REG_SCR4_ADDR 0x0F /* serial port4the user can define the register address */
#define REG_DLL4_ADDR 0x08 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM4_ADDR 0x09 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port5 register address */
#define REG_RBR5_ADDR 0x18 /* serial port5receive buffer register address */
#define REG_THR5_ADDR 0x18 /* serial port5send hold register address */
#define REG_IER5_ADDR 0x19 /* serial port5interrupt enable register address */
#define REG_IIR5_ADDR 0x1A /* serial port5interrupt identifies register address */
#define REG_FCR5_ADDR 0x1A /* serial port5FIFO controls register address */
#define REG_LCR5_ADDR 0x1B /* serial port5circuit control register address */
#define REG_MCR5_ADDR 0x1C /* serial port5MODEM controls register address */
#define REG_LSR5_ADDR 0x1D /* serial port5line status register address */
#define REG_MSR5_ADDR 0x1E /* serial port5address of MODEM status register */
#define REG_SCR5_ADDR 0x1F /* serial port5the user can define the register address */
#define REG_DLL5_ADDR 0x18 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM5_ADDR 0x19 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port6 register address */
#define REG_RBR6_ADDR 0x28 /* serial port6receive buffer register address */
#define REG_THR6_ADDR 0x28 /* serial port6send hold register address */
#define REG_IER6_ADDR 0x29 /* serial port6interrupt enable register address */
#define REG_IIR6_ADDR 0x2A /* serial port6interrupt identifies register address */
#define REG_FCR6_ADDR 0x2A /* serial port6FIFO controls register address */
#define REG_LCR6_ADDR 0x2B /* serial port6circuit control register address */
#define REG_MCR6_ADDR 0x2C /* serial port6MODEM controls register address */
#define REG_LSR6_ADDR 0x2D /* serial port6line status register address */
#define REG_MSR6_ADDR 0x2E /* serial port6address of MODEM status register */
#define REG_SCR6_ADDR 0x2F /* serial port6the user can define the register address */
#define REG_DLL6_ADDR 0x28 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM6_ADDR 0x29 /* Baud rate divisor latch high 8-bit byte address */
/* CH438serial port7 register address */
#define REG_RBR7_ADDR 0x38 /* serial port7receive buffer register address */
#define REG_THR7_ADDR 0x38 /* serial port7send hold register address */
#define REG_IER7_ADDR 0x39 /* serial port7interrupt enable register address */
#define REG_IIR7_ADDR 0x3A /* serial port7interrupt identifies register address */
#define REG_FCR7_ADDR 0x3A /* serial port7FIFO controls register address */
#define REG_LCR7_ADDR 0x3B /* serial port7circuit control register address */
#define REG_MCR7_ADDR 0x3C /* serial port7MODEM controls register address */
#define REG_LSR7_ADDR 0x3D /* serial port7line status register address */
#define REG_MSR7_ADDR 0x3E /* serial port7address of MODEM status register */
#define REG_SCR7_ADDR 0x3F /* serial port7the user can define the register address */
#define REG_DLL7_ADDR 0x38 /* Baud rate divisor latch low 8-bit byte address */
#define REG_DLM7_ADDR 0x39 /* Baud rate divisor latch high 8-bit byte address */
#define REG_SSR_ADDR 0x4F /* pecial status register address */
/* IER register bit */
#define BIT_IER_RESET 0x80 /* The bit is 1 soft reset serial port */
#define BIT_IER_LOWPOWER 0x40 /* The bit is 1 close serial port internal reference clock */
#define BIT_IER_SLP 0x20 /* serial port0 is SLP, 1 close clock vibrator */
#define BIT_IER1_CK2X 0x20 /* serial port1 is CK2X, 1 force the external clock signal after 2 times as internal */
#define BIT_IER_IEMODEM 0x08 /* The bit is 1 allows MODEM input status to interrupt */
#define BIT_IER_IELINES 0x04 /* The bit is 1 allow receiving line status to be interrupted */
#define BIT_IER_IETHRE 0x02 /* The bit is 1 allows the send hold register to break in mid-air */
#define BIT_IER_IERECV 0x01 /* The bit is 1 allows receiving data interrupts */
/* IIR register bit */
#define BIT_IIR_FIFOENS1 0x80
#define BIT_IIR_FIFOENS0 0x40 /* The two is 1 said use FIFO */
/* Interrupt type: 0001 has no interrupt, 0110 receiving line status is interrupted, 0100 receiving data can be interrupted,
1100 received data timeout interrupt, 0010THR register air interrupt, 0000MODEM input change interrupt */
#define BIT_IIR_IID3 0x08
#define BIT_IIR_IID2 0x04
#define BIT_IIR_IID1 0x02
#define BIT_IIR_NOINT 0x01
/* FCR register bit */
/* Trigger point: 00 corresponds to 1 byte, 01 corresponds to 16 bytes, 10 corresponds to 64 bytes, 11 corresponds to 112 bytes */
#define BIT_FCR_RECVTG1 0x80 /* Set the trigger point for FIFO interruption and automatic hardware flow control */
#define BIT_FCR_RECVTG0 0x40 /* Set the trigger point for FIFO interruption and automatic hardware flow control */
#define BIT_FCR_TFIFORST 0x04 /* The bit is 1 empty the data sent in FIFO */
#define BIT_FCR_RFIFORST 0x02 /* The bit is 1 empty the data sent in FIFO */
#define BIT_FCR_FIFOEN 0x01 /* The bit is 1 use FIFO, 0 disable FIFO */
/* LCR register bit */
#define BIT_LCR_DLAB 0x80 /* To access DLL, DLM, 0 to access RBR/THR/IER */
#define BIT_LCR_BREAKEN 0x40 /* 1 forces a BREAK line interval*/
/* Set the check format: when PAREN is 1, 00 odd check, 01 even check, 10 MARK (set 1), 11 blank (SPACE, clear 0) */
#define BIT_LCR_PARMODE1 0x20 /* Sets the parity bit format */
#define BIT_LCR_PARMODE0 0x10 /* Sets the parity bit format */
#define BIT_LCR_PAREN 0x08 /* A value of 1 allows you to generate and receive parity bits when sending */
#define BIT_LCR_STOPBIT 0x04 /* If is 1, then two stop bits, is 0, a stop bit */
/* Set word length: 00 for 5 data bits, 01 for 6 data bits, 10 for 7 data bits and 11 for 8 data bits */
#define BIT_LCR_WORDSZ1 0x02 /* Set the word length length */
#define BIT_LCR_WORDSZ0 0x01
/* MCR register bit */
#define BIT_MCR_AFE 0x20 /* For 1 allows automatic flow control of CTS and RTS hardware */
#define BIT_MCR_LOOP 0x10 /* Is the test mode of 1 enabling internal loop */
#define BIT_MCR_OUT2 0x08 /* 1 Allows an interrupt request for the serial port output */
#define BIT_MCR_OUT1 0x04 /* The MODEM control bit defined for the user */
#define BIT_MCR_RTS 0x02 /* The bit is 1 RTS pin output effective */
#define BIT_MCR_DTR 0x01 /* The bit is 1 DTR pin output effective */
/* LSR register bit */
#define BIT_LSR_RFIFOERR 0x80 /* 1 said There is at least one error in receiving FIFO */
#define BIT_LSR_TEMT 0x40 /* 1 said THR and TSR are empty */
#define BIT_LSR_THRE 0x20 /* 1 said THR is empty*/
#define BIT_LSR_BREAKINT 0x10 /* The bit is 1 said the BREAK line interval was detected*/
#define BIT_LSR_FRAMEERR 0x08 /* The bit is 1 said error reading data frame */
#define BIT_LSR_PARERR 0x04 /* The bit is 1 said parity error */
#define BIT_LSR_OVERR 0x02 /* 1 said receive FIFO buffer overflow */
#define BIT_LSR_DATARDY 0x01 /* The bit is 1 said receive data received in FIFO */
/* MSR register bit */
#define BIT_MSR_DCD 0x80 /* The bit is 1 said DCD pin effective */
#define BIT_MSR_RI 0x40 /* The bit is 1 said RI pin effective */
#define BIT_MSR_DSR 0x20 /* The bit is 1 said DSR pin effective */
#define BIT_MSR_CTS 0x10 /* The bit is 1 said CTS pin effective */
#define BIT_MSR_DDCD 0x08 /* The bit is 1 said DCD pin The input state has changed */
#define BIT_MSR_TERI 0x04 /* The bit is 1 said RI pin The input state has changed */
#define BIT_MSR_DDSR 0x02 /* The bit is 1 said DSR pin The input state has changed */
#define BIT_MSR_DCTS 0x01 /* The bit is 1 said CTS pin The input state has changed */
/* Interrupt status code */
#define INT_NOINT 0x01 /* There is no interruption */
#define INT_THR_EMPTY 0x02 /* THR empty interruption */
#define INT_RCV_OVERTIME 0x0C /* Receive timeout interrupt */
#define INT_RCV_SUCCESS 0x04 /* Interrupts are available to receive data */
#define INT_RCV_LINES 0x06 /* Receiving line status interrupted */
#define INT_MODEM_CHANGE 0x00 /* MODEM input changes interrupt */
#define CH438_IIR_FIFOS_ENABLED 0xC0 /* use FIFO */
#define Fpclk 1843200 /* Define the internal clock frequency*/
/* For Interrupt */
unsigned char CH438_CheckIIR(uint32_t iiraddr); /* Config serial port1interrupt identifies register function */
void CH438_INTConfig(uint32_t ieraddr,uint32_t iiraddr,uint32_t mcraddr); /* Serial interrupt enable function */
void Disable_Interrupt(void); /* Disable EXTI interrupt*/
void Config_Interrupt(void); /* Config EXTI interrupt*/
/* For RT-Thread Config */
static void Ch438Irq(void *parameter);
static rt_err_t rt_ch438_configure(struct rt_serial_device *serial, struct serial_configure *cfg);
static rt_err_t rt_ch438_control(struct rt_serial_device *serial, int cmd, void *arg);
static int rt_ch438_putc(struct rt_serial_device *serial, char c);
static int rt_ch438_getc(struct rt_serial_device *serial);
int rt_hw_ch438_init(void);
int semaphoreChInit(void);
/* Delay */
void up_udelay(void);
void up_mdelay(uint32_t time);
void udelay(unsigned long usecs);
/* CH438 Config */
static void CH438SetOutput(void);
static void CH438SetInput(void);
static uint8_t ReadCH438Data(uint8_t addr);
static void WriteCH438Data(uint8_t addr, const uint8_t dat);
static void WriteCH438Block(uint8_t mAddr, uint8_t mLen, const uint8_t *mBuf);
static void Ch438UartSend(uint8_t ext_uart_no, const uint8_t *Data, uint16_t Num);
uint8_t CH438UARTRcv(uint8_t ext_uart_no, uint8_t *buf, size_t size);
static void ImxrtCH438Init(void);
static void CH438PortInit(uint8_t ext_uart_no, uint32_t baud_rate);
static int ImxrtCh438WriteData(uint8_t ext_uart_no, const uint8_t *write_buffer, size_t size);
static size_t ImxrtCh438ReadData(uint8_t ext_uart_no, size_t size);
static void Ch438InitDefault(void);
static int getCh438InterruptStatus(void );
/* CH438 Test Function */
void CH438Test(void);
void HC08Test(void);
void ZigBeeTest(void);
void CH438Init(void);
#endif