autotest
/
xiuos
forked from xuos/xiuos
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

feat add ethernet mac\W5500\spi for xishutong-arm32 board

This commit is contained in:
Liu_Weichao 2023-11-30 11:25:43 +08:00
parent c55286286e
commit d5da547813
11 changed files with 701 additions and 281 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

261
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/.defconfig
View File

@ -1,261 +0,0 @@
#
# Automatically generated file; DO NOT EDIT.
# XiZi_IIoT Project Configuration
#
CONFIG_BOARD_EDU_ARM32_EVB=y
CONFIG_ARCH_ARM=y
#
# hc32f4a0 feature
#
CONFIG_BSP_USING_UART=y
CONFIG_BSP_USING_UART3=y
CONFIG_SERIAL_BUS_NAME_3="usart3"
CONFIG_SERIAL_DRV_NAME_3="usart3_drv"
CONFIG_SERIAL_3_DEVICE_NAME_0="usart3_dev3"
CONFIG_BSP_USING_UART6=y
CONFIG_SERIAL_BUS_NAME_6="usart6"
CONFIG_SERIAL_DRV_NAME_6="usart6_drv"
CONFIG_SERIAL_6_DEVICE_NAME_0="usart6_dev6"
#
# config default board resources
#
#
# config board app name
#
CONFIG_BOARD_APP_NAME="/XiUOS_edu_arm32_app.bin"
#
# Hardware feature
#
CONFIG_RESOURCES_SERIAL=y
CONFIG_SERIAL_USING_DMA=y
CONFIG_SERIAL_RB_BUFSZ=128
#
# Kernel feature
#
#
# separate compile(choose none for compile once)
#
# CONFIG_SEPARATE_COMPILE is not set
# CONFIG_COMPILER_APP is not set
# CONFIG_APP_STARTUP_FROM_SDCARD is not set
CONFIG_APP_STARTUP_FROM_FLASH=y
# CONFIG_COMPILER_KERNEL is not set
#
# Memory Management
#
# CONFIG_KERNEL_MEMBLOCK is not set
CONFIG_MEM_ALIGN_SIZE=8
# CONFIG_MEM_EXTERN_SRAM is not set
CONFIG_MM_PAGE_SIZE=4096
#
# Using small memory allocator
#
CONFIG_KERNEL_SMALL_MEM_ALLOC=y
CONFIG_SMALL_NUMBER_32B=64
CONFIG_SMALL_NUMBER_64B=32
#
# Task feature
#
CONFIG_USER_APPLICATION=y
# CONFIG_TASK_ISOLATION is not set
#
# Inter-Task communication
#
CONFIG_KERNEL_SEMAPHORE=y
CONFIG_KERNEL_MUTEX=y
CONFIG_KERNEL_EVENT=y
CONFIG_KERNEL_MESSAGEQUEUE=y
CONFIG_KERNEL_SOFTTIMER=y
CONFIG_SCHED_POLICY_RR_REMAINSLICE=y
# CONFIG_SCHED_POLICY_RR is not set
# CONFIG_SCHED_POLICY_FIFO is not set
# CONFIG_KTASK_PRIORITY_8 is not set
CONFIG_KTASK_PRIORITY_32=y
# CONFIG_KTASK_PRIORITY_256 is not set
CONFIG_KTASK_PRIORITY_MAX=32
CONFIG_TICK_PER_SECOND=1000
CONFIG_KERNEL_STACK_OVERFLOW_CHECK=y
CONFIG_IDLE_KTASK_STACKSIZE=1024
CONFIG_ZOMBIE_KTASK_STACKSIZE=2048
#
# Kernel Console
#
CONFIG_KERNEL_CONSOLE=y
CONFIG_KERNEL_BANNER=y
CONFIG_KERNEL_CONSOLEBUF_SIZE=128
#
# Kernel Hook
#
# CONFIG_KERNEL_HOOK is not set
#
# Command shell
#
CONFIG_TOOL_SHELL=y
CONFIG_SHELL_ENTER_CR=y
CONFIG_SHELL_ENTER_LF=y
CONFIG_SHELL_ENTER_CR_AND_LF=y
# CONFIG_SHELL_ENTER_CRLF is not set
#
# Set shell user control
#
CONFIG_SHELL_DEFAULT_USER="letter"
CONFIG_SHELL_DEFAULT_USER_PASSWORD=""
CONFIG_SHELL_LOCK_TIMEOUT=10000
#
# Set shell config param
#
CONFIG_SHELL_TASK_STACK_SIZE=4096
CONFIG_SHELL_TASK_PRIORITY=20
CONFIG_SHELL_MAX_NUMBER=5
CONFIG_SHELL_PARAMETER_MAX_NUMBER=8
CONFIG_SHELL_HISTORY_MAX_NUMBER=5
CONFIG_SHELL_PRINT_BUFFER=128
CONFIG_SHELL_HELP_SHOW_PERMISSION=y
# CONFIG_SHELL_HELP_LIST_USER is not set
CONFIG_SHELL_HELP_LIST_VAR=y
# CONFIG_SHELL_HELP_LIST_KEY is not set
#
# Kernel data structure Manage
#
CONFIG_KERNEL_QUEUEMANAGE=y
CONFIG_KERNEL_WORKQUEUE=y
CONFIG_WORKQUEUE_KTASK_STACKSIZE=2048
CONFIG_WORKQUEUE_KTASK_PRIORITY=23
CONFIG_QUEUE_MAX=16
CONFIG_KERNEL_WAITQUEUE=y
CONFIG_KERNEL_DATAQUEUE=y
# CONFIG_KERNEL_CIRCULAR_AREA is not set
# CONFIG_KERNEL_AVL_TREE is not set
#
# Kernel components init
#
CONFIG_KERNEL_COMPONENTS_INIT=y
CONFIG_ENV_INIT_KTASK_STACK_SIZE=2048
CONFIG_KERNEL_USER_MAIN=y
CONFIG_NAME_NUM_MAX=32
# CONFIG_KERNEL_DEBUG is not set
# CONFIG_ARCH_SMP is not set
#
# hash table config
#
CONFIG_ID_HTABLE_SIZE=16
CONFIG_ID_NUM_MAX=128
# CONFIG_KERNEL_TEST is not set
#
# Lib
#
CONFIG_LIB=y
CONFIG_LIB_POSIX=y
CONFIG_LIB_NEWLIB=y
# CONFIG_LIB_MUSLLIB is not set
#
# C++ features
#
# CONFIG_LIB_CPLUSPLUS is not set
#
# File system
#
CONFIG_FS_VFS=y
CONFIG_VFS_USING_WORKDIR=y
CONFIG_FS_VFS_DEVFS=y
CONFIG_FS_VFS_FATFS=y
# CONFIG_FS_CH376 is not set
# CONFIG_FS_LWEXT4 is not set
#
# APP_Framework
#
#
# Framework
#
CONFIG_TRANSFORM_LAYER_ATTRIUBUTE=y
CONFIG_ADD_XIZI_FEATURES=y
# CONFIG_ADD_NUTTX_FEATURES is not set
# CONFIG_ADD_RTTHREAD_FEATURES is not set
# CONFIG_SUPPORT_SENSOR_FRAMEWORK is not set
# CONFIG_SUPPORT_CONNECTION_FRAMEWORK is not set
# CONFIG_SUPPORT_KNOWING_FRAMEWORK is not set
# CONFIG_SUPPORT_CONTROL_FRAMEWORK is not set
#
# Security
#
# CONFIG_CRYPTO is not set
#
# Applications
#
#
# config stack size and priority of main task
#
CONFIG_MAIN_KTASK_STACK_SIZE=1024
CONFIG_MAIN_KTASK_PRIORITY=16
#
# ota app
#
# CONFIG_APPLICATION_OTA is not set
#
# test app
#
# CONFIG_USER_TEST is not set
#
# connection app
#
# CONFIG_APPLICATION_CONNECTION is not set
#
# control app
#
#
# knowing app
#
# CONFIG_APPLICATION_KNOWING is not set
#
# sensor app
#
# CONFIG_APPLICATION_SENSOR is not set
# CONFIG_USING_EMBEDDED_DATABASE_APP is not set
# CONFIG_APP_USING_WEBNET is not set
#
# lib
#
CONFIG_APP_SELECT_NEWLIB=y
# CONFIG_APP_SELECT_OTHER_LIB is not set
# CONFIG_LIB_USING_CJSON is not set
# CONFIG_LIB_USING_QUEUE is not set
# CONFIG_LIB_LV is not set
#
# LVGL configuration
#
# CONFIG_LV_CONF_MINIMAL is not set
# CONFIG_USING_EMBEDDED_DATABASE is not set

2
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/board.c
View File

@ -210,7 +210,7 @@ struct InitSequenceDesc _board_init[] = {
#ifdef BSP_USING_CAN #ifdef BSP_USING_CAN
{ "can", HwCanInit }, { "can", HwCanInit },
#endif #endif
#ifdef BSP_USING_LWIP #ifdef BSP_USING_W5500
{ "wiz", HwWiznetInit }, { "wiz", HwWiznetInit },
#endif #endif
{ " NONE ", NONE }, { " NONE ", NONE },

30
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/Kconfig
View File

@ -14,14 +14,29 @@ menuconfig BSP_USING_GPIO
source "$BSP_DIR/third_party_driver/gpio/Kconfig" source "$BSP_DIR/third_party_driver/gpio/Kconfig"
endif endif
menuconfig BSP_USING_LWIP menuconfig BSP_USING_ETHERNET
bool "Using LwIP by ethernet device" bool "Using MAC ethernet device"
default n default n
select RESOURCES_LWIP select BSP_USING_LWIP
if BSP_USING_LWIP if BSP_USING_ETHERNET
source "$BSP_DIR/third_party_driver/ethernet/Kconfig" source "$BSP_DIR/third_party_driver/ethernet/Kconfig"
endif endif
menuconfig BSP_USING_W5500
bool "Using W5500 ethernet device"
default n
select BSP_USING_LWIP
select BSP_USING_SPI
select BSP_USING_SPI1
if BSP_USING_W5500
source "$BSP_DIR/third_party_driver/ethernet_wiz/Kconfig"
endif
config BSP_USING_LWIP
bool
default n
select RESOURCES_LWIP
menuconfig BSP_USING_SDIO menuconfig BSP_USING_SDIO
bool "Using SD CARD device" bool "Using SD CARD device"
default n default n
@ -30,3 +45,10 @@ menuconfig BSP_USING_SDIO
source "$BSP_DIR/third_party_driver/sdio/Kconfig" source "$BSP_DIR/third_party_driver/sdio/Kconfig"
endif endif
menuconfig BSP_USING_SPI
bool "Using SPI device"
default n
select RESOURCES_SPI
if BSP_USING_SPI
source "$BSP_DIR/third_party_driver/spi/Kconfig"
endif

12
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/Makefile
View File

@ -8,12 +8,20 @@ ifeq ($(CONFIG_BSP_USING_GPIO),y)
SRC_DIR += gpio SRC_DIR += gpio
endif endif
ifeq ($(CONFIG_BSP_USING_LWIP),y) ifeq ($(CONFIG_BSP_USING_ETHERNET),y)
SRC_DIR += ethernet ethernet_wiz SRC_DIR += ethernet
endif
ifeq ($(CONFIG_BSP_USING_W5500),y)
SRC_DIR += ethernet_wiz
endif endif
ifeq ($(CONFIG_BSP_USING_SDIO),y) ifeq ($(CONFIG_BSP_USING_SDIO),y)
SRC_DIR += sdio SRC_DIR += sdio
endif endif
ifeq ($(CONFIG_BSP_USING_SPI),y)
SRC_DIR += spi
endif
include $(KERNEL_ROOT)/compiler.mk include $(KERNEL_ROOT)/compiler.mk

2
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/common/hc32_ll_driver/src/Makefile
View File

@ -28,7 +28,7 @@ ifeq ($(CONFIG_BSP_USING_I2C),y)
SRC_FILES += hc32_ll_i2c.c SRC_FILES += hc32_ll_i2c.c
endif endif
ifeq ($(CONFIG_BSP_USING_LWIP),y) ifeq ($(CONFIG_BSP_USING_ETHERNET),y)
SRC_FILES += hc32_ll_eth.c SRC_FILES += hc32_ll_eth.c
endif endif

10
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/ethernet_wiz/Kconfig
View File

@ -1,10 +1,5 @@
# Kconfig file # Kconfig file
config BSP_USING_W5500
bool "Using w5500"
select BSP_USING_LWIP
default y
config BSP_WIZ_RST_PIN config BSP_WIZ_RST_PIN
int int
default 13 default 13
@ -12,8 +7,3 @@ config BSP_WIZ_RST_PIN
config BSP_WIZ_INT_PIN config BSP_WIZ_INT_PIN
int int
default 14 default 14
menuconfig BSP_USING_LWIP
bool "Using LwIP device"
default n
select RESOURCES_LWIP

8
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/include/connect_ethernet.h
View File

@ -26,13 +26,16 @@
#include <hc32_ll_eth.h> #include <hc32_ll_eth.h>
#include <sys_arch.h> #include <sys_arch.h>
#ifdef BSP_USING_W5500
#include "connect_ethernet_wiz.h" #include "connect_ethernet_wiz.h"
#include "connect_w5500.h" #include "connect_w5500.h"
#endif
#ifdef __cplusplus #ifdef __cplusplus
extern "C" { extern "C" {
#endif #endif
#ifdef BSP_USING_ETHERNET
struct hc32_irq_config { struct hc32_irq_config {
IRQn_Type irq_num; IRQn_Type irq_num;
uint32_t irq_prio; uint32_t irq_prio;
@ -64,11 +67,12 @@ int32_t low_level_init(struct netif* netif);
err_t low_level_output(struct netif* netif, struct pbuf* p); err_t low_level_output(struct netif* netif, struct pbuf* p);
struct pbuf* low_level_input(struct netif* netif); struct pbuf* low_level_input(struct netif* netif);
int HwEthInit(void);
#endif
int lwip_netdev_add(struct netif* lwip_netif); int lwip_netdev_add(struct netif* lwip_netif);
void lwip_netdev_del(struct netif* lwip_netif); void lwip_netdev_del(struct netif* lwip_netif);
int HwEthInit(void);
#ifdef __cplusplus #ifdef __cplusplus
} }
#endif #endif

39
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/include/connect_spi.h Normal file
View File

@ -0,0 +1,39 @@
/*
* Copyright (c) 2020 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file connect_spi.h
* @brief define xishutong-arm32-board spi function and struct
* @version 2.0
* @author AIIT XUOS Lab
* @date 2022-10-17
*/
#ifndef CONNECT_SPI_H
#define CONNECT_SPI_H
#include <device.h>
#include <hardware_irq.h>
#include <hc32_ll_spi.h>
#include <hc32_ll_gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
int HwSpiInit(void);
#ifdef __cplusplus
}
#endif
#endif

33
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/spi/Kconfig Normal file
View File

@ -0,0 +1,33 @@
if BSP_USING_SPI
config BSP_USING_SPI1
bool "Using spi1 for W5500"
default y
if BSP_USING_SPI1
config SPI_BUS_NAME_1
string "spi bus 1 name"
default "spi1"
config SPI_1_DEVICE_NAME_0
string "spi bus 1 device 0 name"
default "spi1_dev0"
config SPI_1_DRV_NAME
string "spi bus 1 driver name"
default "spi1_drv"
endif
config BSP_USING_SPI6
bool "Using spi6"
default n
if BSP_USING_SPI6
config SPI_BUS_NAME_6
string "spi bus 6 name"
default "spi6"
config SPI_6_DEVICE_NAME_0
string "spi bus 6 device 0 name"
default "spi6_dev0"
config SPI_6_DRV_NAME
string "spi bus 6 driver name"
default "spi6_drv"
endif
endif

3
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/spi/Makefile Normal file
View File

@ -0,0 +1,3 @@
SRC_FILES := connect_spi.c
include $(KERNEL_ROOT)/compiler.mk

582
Ubiquitous/XiZi_IIoT/board/xishutong-arm32/third_party_driver/spi/connect_spi.c Normal file
View File

@ -0,0 +1,582 @@
/*
* Copyright (c) 2020 AIIT XUOS Lab
* XiUOS is licensed under Mulan PSL v2.
* You can use this software according to the terms and conditions of the Mulan PSL v2.
* You may obtain a copy of Mulan PSL v2 at:
* http://license.coscl.org.cn/MulanPSL2
* THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
* EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
* MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
* See the Mulan PSL v2 for more details.
*/
/**
* @file connect_spi.c
* @brief support edu-arm32-board spi function and register to bus framework
* @version 2.0
* @author AIIT XUOS Lab
* @date 2022-10-17
*/
/*************************************************
File name: connect_spi.c
Description: support xishutong-arm32-board spi function and register to bus framework
Others:
History:
1. Date: 2022-10-17
Author: AIIT XUOS Lab
Modification:
1. support xishutong-arm32-board spi configure, write and read
2. support xishutong-arm32-board spi bus device and driver register
3. SPI1 for W5500, SPI6 using J12-pin-header to connect
*************************************************/
#include <connect_spi.h>
#define SPI1_MASTER_SLAVE_MODE (SPI_MASTER)
/* SPI1 definition */
#define SPI1_UNIT (CM_SPI1)
#define SPI1_CLK (FCG1_PERIPH_SPI1)
/* CS = PG3 */
#define SPI1_SS_PORT (GPIO_PORT_G)
#define SPI1_SS_PIN (GPIO_PIN_03)
/* SCLK = PG5 */
#define SPI1_SCK_PORT (GPIO_PORT_G)
#define SPI1_SCK_PIN (GPIO_PIN_05)
#define SPI1_SCK_FUNC (GPIO_FUNC_40)
/* MOSI = PG4 */
#define SPI1_MOSI_PORT (GPIO_PORT_G)
#define SPI1_MOSI_PIN (GPIO_PIN_04)
#define SPI1_MOSI_FUNC (GPIO_FUNC_41)
/* MISO = PG6 */
#define SPI1_MISO_PORT (GPIO_PORT_G)
#define SPI1_MISO_PIN (GPIO_PIN_06)
#define SPI1_MISO_FUNC (GPIO_FUNC_42)
#define SPI1_DEVICE_SLAVE_ID_0 0
/* SPI6 definition */
#define SPI6_UNIT (CM_SPI6)
#define SPI6_CLK (FCG1_PERIPH_SPI6)
/* SS = PE02 */
#define SPI6_SS_PORT (GPIO_PORT_E)
#define SPI6_SS_PIN (GPIO_PIN_02)
/* SCK = PE03 */
#define SPI6_SCK_PORT (GPIO_PORT_E)
#define SPI6_SCK_PIN (GPIO_PIN_03)
#define SPI6_SCK_FUNC (GPIO_FUNC_46)
/* MOSI = PE04 */
#define SPI6_MOSI_PORT (GPIO_PORT_E)
#define SPI6_MOSI_PIN (GPIO_PIN_04)
#define SPI6_MOSI_FUNC (GPIO_FUNC_47)
/* MISO = PE05 */
#define SPI6_MISO_PORT (GPIO_PORT_E)
#define SPI6_MISO_PIN (GPIO_PIN_05)
#define SPI6_MISO_FUNC (GPIO_FUNC_48)
#define SPI6_DEVICE_SLAVE_ID_0 0
static void HwSpiEnable(CM_SPI_TypeDef* SPIx)
{
/* Check if the SPI is already enabled */
if (SPI_CR1_SPE != (SPIx->CR1 & SPI_CR1_SPE)) {
SPI_Cmd(SPIx, ENABLE);
}
}
/*Init the spi sdk intetface */
static uint32 SpiSdkInit(struct SpiDriver* spi_drv)
{
NULL_PARAM_CHECK(spi_drv);
stc_spi_init_t stcSpiInit;
stc_gpio_init_t stcGpioInit;
SpiDeviceParam* dev_param = (SpiDeviceParam*)(spi_drv->driver.private_data);
#ifdef BSP_USING_SPI1
/* Configure Port */
(void)GPIO_StructInit(&stcGpioInit);
stcGpioInit.u16PinState = PIN_STAT_RST;
stcGpioInit.u16PinDir = PIN_DIR_OUT;
(void)GPIO_Init(SPI1_SS_PORT, SPI1_SS_PIN, &stcGpioInit);
GPIO_SetPins(SPI1_SS_PORT, SPI1_SS_PIN);
GPIO_SetFunc(SPI1_SCK_PORT, SPI1_SCK_PIN, SPI1_SCK_FUNC);
GPIO_SetFunc(SPI1_MOSI_PORT, SPI1_MOSI_PIN, SPI1_MOSI_FUNC);
GPIO_SetFunc(SPI1_MISO_PORT, SPI1_MISO_PIN, SPI1_MISO_FUNC);
/* Configuration SPI */
FCG_Fcg1PeriphClockCmd(SPI1_CLK, ENABLE);
SPI_StructInit(&stcSpiInit);
stcSpiInit.u32WireMode = SPI_4_WIRE;
stcSpiInit.u32TransMode = SPI_FULL_DUPLEX;
stcSpiInit.u32MasterSlave = SPI1_MASTER_SLAVE_MODE;
stcSpiInit.u32Parity = SPI_PARITY_INVD;
if (SPI_MODE_0 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_0;
} else if (SPI_MODE_1 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_1;
} else if (SPI_MODE_2 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_2;
} else if (SPI_MODE_3 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_3;
}
stcSpiInit.u32BaudRatePrescaler = SPI_BR_CLK_DIV64;
if (8 == dev_param->spi_master_param->spi_data_bit_width) {
stcSpiInit.u32DataBits = SPI_DATA_SIZE_8BIT;
} else if (7 == dev_param->spi_master_param->spi_data_bit_width) {
stcSpiInit.u32DataBits = SPI_DATA_SIZE_7BIT;
}
if (SPI_LSB == dev_param->spi_master_param->spi_work_mode & 0x4) {
stcSpiInit.u32FirstBit = SPI_FIRST_LSB;
} else if (SPI_MSB == dev_param->spi_master_param->spi_work_mode & 0x4) {
stcSpiInit.u32FirstBit = SPI_FIRST_MSB;
}
stcSpiInit.u32FrameLevel = SPI_1_FRAME;
(void)SPI_Init(SPI1_UNIT, &stcSpiInit);
SPI_Cmd(SPI1_UNIT, ENABLE);
#endif
#ifdef BSP_USING_SPI6
/* Configure Port */
(void)GPIO_StructInit(&stcGpioInit);
stcGpioInit.u16PinState = PIN_STAT_RST;
stcGpioInit.u16PinDir = PIN_DIR_OUT;
(void)GPIO_Init(SPI6_SS_PORT, SPI6_SS_PIN, &stcGpioInit);
GPIO_SetPins(SPI6_SS_PORT, SPI6_SS_PIN);
GPIO_SetFunc(SPI6_SCK_PORT, SPI6_SCK_PIN, SPI6_SCK_FUNC);
GPIO_SetFunc(SPI6_MOSI_PORT, SPI6_MOSI_PIN, SPI6_MOSI_FUNC);
GPIO_SetFunc(SPI6_MISO_PORT, SPI6_MISO_PIN, SPI6_MISO_FUNC);
/* Configuration SPI */
FCG_Fcg1PeriphClockCmd(SPI6_CLK, ENABLE);
SPI_StructInit(&stcSpiInit);
stcSpiInit.u32WireMode = SPI_4_WIRE;
stcSpiInit.u32TransMode = SPI_FULL_DUPLEX;
stcSpiInit.u32MasterSlave = SPI1_MASTER_SLAVE_MODE;
stcSpiInit.u32Parity = SPI_PARITY_INVD;
if (SPI_MODE_0 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_0;
} else if (SPI_MODE_1 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_1;
} else if (SPI_MODE_2 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_2;
} else if (SPI_MODE_3 == dev_param->spi_master_param->spi_work_mode & 0x3) {
stcSpiInit.u32SpiMode = SPI_MD_3;
}
stcSpiInit.u32BaudRatePrescaler = SPI_BR_CLK_DIV64;
if (8 == dev_param->spi_master_param->spi_data_bit_width) {
stcSpiInit.u32DataBits = SPI_DATA_SIZE_8BIT;
} else if (7 == dev_param->spi_master_param->spi_data_bit_width) {
stcSpiInit.u32DataBits = SPI_DATA_SIZE_7BIT;
}
if (SPI_LSB == dev_param->spi_master_param->spi_work_mode & 0x4) {
stcSpiInit.u32FirstBit = SPI_FIRST_LSB;
} else if (SPI_MSB == dev_param->spi_master_param->spi_work_mode & 0x4) {
stcSpiInit.u32FirstBit = SPI_FIRST_MSB;
}
stcSpiInit.u32FrameLevel = SPI_1_FRAME;
(void)SPI_Init(SPI6_UNIT, &stcSpiInit);
SPI_Cmd(SPI6_UNIT, ENABLE);
#endif
return EOK;
}
static uint32 SpiSdkCfg(struct SpiDriver* spi_drv, struct SpiMasterParam* spi_param)
{
NULL_PARAM_CHECK(spi_drv);
NULL_PARAM_CHECK(spi_param);
SpiDeviceParam* dev_param = (SpiDeviceParam*)(spi_drv->driver.private_data);
dev_param->spi_master_param = spi_param;
dev_param->spi_master_param->spi_work_mode = dev_param->spi_master_param->spi_work_mode & SPI_MODE_MASK;
return EOK;
}
/*Configure the spi device param, make sure struct (configure_info->private_data) = (SpiMasterParam)*/
static uint32 SpiDrvConfigure(void* drv, struct BusConfigureInfo* configure_info)
{
NULL_PARAM_CHECK(drv);
NULL_PARAM_CHECK(configure_info);
x_err_t ret = EOK;
struct SpiDriver* spi_drv = (struct SpiDriver*)drv;
struct SpiMasterParam* spi_param;
switch (configure_info->configure_cmd) {
case OPE_INT:
ret = SpiSdkInit(spi_drv);
break;
case OPE_CFG:
spi_param = (struct SpiMasterParam*)configure_info->private_data;
ret = SpiSdkCfg(spi_drv, spi_param);
break;
default:
break;
}
return ret;
}
static uint32 SpiWriteData(struct SpiHardwareDevice* spi_dev, struct SpiDataStandard* spi_datacfg)
{
SpiDeviceParam* dev_param = (SpiDeviceParam*)(spi_dev->haldev.private_data);
uint8 cs_gpio_pin = dev_param->spi_slave_param->spi_cs_gpio_pin;
uint8 cs_gpio_port = dev_param->spi_slave_param->spi_cs_gpio_port;
CM_SPI_TypeDef* spi = spi_dev->haldev.owner_bus->private_data;
int i = 0;
uint32 ret = EOK;
int32 spi_write_status = 0;
while (NONE != spi_datacfg) {
if (spi_datacfg->spi_chip_select) {
GPIO_ResetPins(cs_gpio_port, cs_gpio_pin);
}
if (spi_datacfg->length) {
uint8* tx_buff = x_malloc(spi_datacfg->length);
if ((spi_datacfg->tx_buff) && (tx_buff)) {
memset(tx_buff, 0, spi_datacfg->length);
for (i = 0; i < spi_datacfg->length; i++) {
tx_buff[i] = ((uint8*)spi_datacfg->tx_buff)[i];
}
HwSpiEnable(spi);
spi_write_status = SPI_Trans(spi, tx_buff, spi_datacfg->length, 1000);
while (RESET != SPI_GetStatus(spi, SPI_FLAG_IDLE))
;
if (LL_OK == spi_write_status) {
ret = ERROR;
}
}
if (tx_buff) {
x_free(tx_buff);
}
SPI_ClearStatus(spi, SPI_FLAG_CLR_ALL | SPI_FLAG_RX_BUF_FULL);
}
if (spi_datacfg->spi_cs_release) {
GPIO_SetPins(cs_gpio_port, cs_gpio_pin);
}
spi_datacfg = spi_datacfg->next;
}
return ret;
}
static uint32 SpiReadData(struct SpiHardwareDevice* spi_dev, struct SpiDataStandard* spi_datacfg)
{
SpiDeviceParam* dev_param = (SpiDeviceParam*)(spi_dev->haldev.private_data);
uint8 cs_gpio_pin = dev_param->spi_slave_param->spi_cs_gpio_pin;
uint8 cs_gpio_port = dev_param->spi_slave_param->spi_cs_gpio_port;
CM_SPI_TypeDef* spi = spi_dev->haldev.owner_bus->private_data;
int i = 0;
int32 spi_read_status = 0;
uint32 spi_read_length = 0;
while (NONE != spi_datacfg) {
if (spi_datacfg->spi_chip_select) {
GPIO_ResetPins(cs_gpio_port, cs_gpio_pin);
}
if (spi_datacfg->length) {
uint8_t* rx_buff = x_malloc(spi_datacfg->length);
if ((spi_datacfg->rx_buff) && (rx_buff)) {
memset(rx_buff, 0xFF, spi_datacfg->length);
HwSpiEnable(spi);
spi_read_status = SPI_Receive(spi, rx_buff, spi_datacfg->length, 1000);
while (RESET != SPI_GetStatus(spi, SPI_FLAG_IDLE))
;
if (LL_OK == spi_read_status) {
for (i = 0; i < spi_datacfg->length; i++) {
((uint8_t*)spi_datacfg->rx_buff)[i] = rx_buff[i];
}
}
}
if (rx_buff) {
x_free(rx_buff);
}
SPI_ClearStatus(spi, SPI_FLAG_CLR_ALL | SPI_FLAG_RX_BUF_FULL);
}
if (spi_datacfg->spi_cs_release) {
GPIO_SetPins(cs_gpio_port, cs_gpio_pin);
}
spi_read_length += spi_datacfg->length;
spi_datacfg = spi_datacfg->next;
}
return spi_read_length;
}
/*manage the spi device operations*/
static const struct SpiDevDone spi_dev_done = {
.dev_open = NONE,
.dev_close = NONE,
.dev_write = SpiWriteData,
.dev_read = SpiReadData,
};
static int BoardSpiBusInit(struct SpiBus* spi_bus, struct SpiDriver* spi_driver, const char* bus_name, const char* drv_name)
{
x_err_t ret = EOK;
/*Init the spi bus */
ret = SpiBusInit(spi_bus, bus_name);
if (EOK != ret) {
KPrintf("Board_Spi_init SpiBusInit error %d\n", ret);
return ERROR;
}
/*Init the spi driver*/
ret = SpiDriverInit(spi_driver, drv_name);
if (EOK != ret) {
KPrintf("Board_Spi_init SpiDriverInit error %d\n", ret);
return ERROR;
}
/*Attach the spi driver to the spi bus*/
ret = SpiDriverAttachToBus(drv_name, bus_name);
if (EOK != ret) {
KPrintf("Board_Spi_init SpiDriverAttachToBus error %d\n", ret);
return ERROR;
}
return ret;
}
/*Attach the spi device to the spi bus*/
static int BoardSpiDevBend(void)
{
x_err_t ret = EOK;
#ifdef SPI_1_DEVICE_NAME_0
static struct SpiHardwareDevice spi1_device0;
memset(&spi1_device0, 0, sizeof(struct SpiHardwareDevice));
static struct SpiSlaveParam spi1_slaveparam0;
memset(&spi1_slaveparam0, 0, sizeof(struct SpiSlaveParam));
spi1_slaveparam0.spi_slave_id = SPI1_DEVICE_SLAVE_ID_0;
spi1_slaveparam0.spi_cs_gpio_pin = SPI1_SS_PIN;
spi1_slaveparam0.spi_cs_gpio_port = SPI1_SS_PORT;
spi1_device0.spi_param.spi_slave_param = &spi1_slaveparam0;
spi1_device0.spi_dev_done = &(spi_dev_done);
ret = SpiDeviceRegister(&spi1_device0, (void*)(&spi1_device0.spi_param), SPI_1_DEVICE_NAME_0);
if (EOK != ret) {
KPrintf("BoardSpiDevBend SpiDeviceRegister device %s error %d\n", SPI_1_DEVICE_NAME_0, ret);
return ERROR;
}
ret = SpiDeviceAttachToBus(SPI_1_DEVICE_NAME_0, SPI_BUS_NAME_1);
if (EOK != ret) {
KPrintf("BoardSpiDevBend SpiDeviceAttachToBus device %s error %d\n", SPI_1_DEVICE_NAME_0, ret);
return ERROR;
}
#endif
#ifdef SPI_6_DEVICE_NAME_0
static struct SpiHardwareDevice spi6_device0;
memset(&spi6_device0, 0, sizeof(struct SpiHardwareDevice));
static struct SpiSlaveParam spi6_slaveparam0;
memset(&spi6_slaveparam0, 0, sizeof(struct SpiSlaveParam));
spi6_slaveparam0.spi_slave_id = SPI1_DEVICE_SLAVE_ID_0;
spi6_slaveparam0.spi_cs_gpio_pin = SPI6_SS_PIN;
spi6_slaveparam0.spi_cs_gpio_port = SPI6_SS_PORT;
spi6_device0.spi_param.spi_slave_param = &spi6_slaveparam0;
spi6_device0.spi_dev_done = &(spi_dev_done);
ret = SpiDeviceRegister(&spi6_device0, (void*)(&spi6_device0.spi_param), SPI_6_DEVICE_NAME_0);
if (EOK != ret) {
KPrintf("BoardSpiDevBend SpiDeviceRegister device %s error %d\n", SPI_6_DEVICE_NAME_0, ret);
return ERROR;
}
ret = SpiDeviceAttachToBus(SPI_6_DEVICE_NAME_0, SPI_BUS_NAME_6);
if (EOK != ret) {
KPrintf("BoardSpiDevBend SpiDeviceAttachToBus device %s error %d\n", SPI_6_DEVICE_NAME_0, ret);
return ERROR;
}
#endif
return ret;
}
int HwSpiInit(void)
{
x_err_t ret = EOK;
#ifdef BSP_USING_SPI1
static struct SpiBus spi1_bus;
memset(&spi1_bus, 0, sizeof(struct SpiBus));
static struct SpiDriver spi1_driver;
memset(&spi1_driver, 0, sizeof(struct SpiDriver));
spi1_bus.private_data = SPI1_UNIT;
spi1_driver.configure = SpiDrvConfigure;
ret = BoardSpiBusInit(&spi1_bus, &spi1_driver, SPI_BUS_NAME_1, SPI_1_DRV_NAME);
if (EOK != ret) {
KPrintf("BoardSpiBusInit error ret %u\n", ret);
return ERROR;
}
#endif
#ifdef BSP_USING_SPI6
static struct SpiBus spi6_bus;
memset(&spi6_bus, 0, sizeof(struct SpiBus));
static struct SpiDriver spi6_driver;
memset(&spi6_driver, 0, sizeof(struct SpiDriver));
spi6_bus.private_data = SPI6_UNIT;
spi6_driver.configure = SpiDrvConfigure;
ret = BoardSpiBusInit(&spi6_bus, &spi6_driver, SPI_BUS_NAME_6, SPI_6_DRV_NAME);
if (EOK != ret) {
KPrintf("BoardSpiBusInit error ret %u\n", ret);
return ERROR;
}
#endif
ret = BoardSpiDevBend();
if (EOK != ret) {
KPrintf("BoardSpiDevBend error ret %u\n", ret);
return ERROR;
}
return ret;
}
#ifdef TEST_SPI
/*Just for lora test*/
static struct Bus* bus;
static struct HardwareDev* dev;
static struct Driver* drv;
static uint32 TestSpiLoraOpen(void)
{
NULL_PARAM_CHECK(drv);
KPrintf("SpiLoraOpen start\n");
x_err_t ret = EOK;
struct BusConfigureInfo configure_info;
struct SpiMasterParam spi_master_param;
spi_master_param.spi_data_bit_width = 8;
spi_master_param.spi_work_mode = SPI_MODE_0 | SPI_MSB;
configure_info.configure_cmd = OPE_CFG;
configure_info.private_data = (void*)&spi_master_param;
ret = BusDrvConfigure(drv, &configure_info);
if (ret) {
KPrintf("spi drv OPE_CFG error drv %8p cfg %8p\n", drv, &spi_master_param);
return ERROR;
}
configure_info.configure_cmd = OPE_INT;
ret = BusDrvConfigure(drv, &configure_info);
if (ret) {
KPrintf("spi drv OPE_INT error drv %8p\n", drv);
return ERROR;
}
return ret;
}
static void TestSpiRead(void)
{
struct BusBlockWriteParam write_param;
struct BusBlockReadParam read_param;
uint8 write_addr = 0x06 & 0x7F;
uint8 read_data = 0;
BusDevOpen(dev);
write_param.buffer = (void*)&write_addr;
write_param.size = 1;
BusDevWriteData(dev, &write_param);
read_param.buffer = (void*)&read_data;
read_param.size = 1;
BusDevReadData(dev, &read_param);
BusDevClose(dev);
KPrintf("read data from lora 0x06 register, receive data 0x%x\n", read_data);
}
SHELL_EXPORT_CMD(SHELL_CMD_PERMISSION(0) | SHELL_CMD_TYPE(SHELL_TYPE_CMD_MAIN),
TestSpiRead, TestSpiRead, read data from lora register);
void TestLoraOpen(void)
{
x_err_t ret = EOK;
bus = BusFind(SPI_BUS_NAME_1);
dev = BusFindDevice(bus, SPI_1_DEVICE_NAME_0);
drv = BusFindDriver(bus, SPI_1_DRV_NAME);
bus->match(drv, dev);
ret = TestSpiLoraOpen();
if (EOK != ret) {
KPrintf("LoRa init failed\n");
return;
}
KPrintf("LoRa init succeed\n");
return;
}
SHELL_EXPORT_CMD(SHELL_CMD_PERMISSION(0) | SHELL_CMD_TYPE(SHELL_TYPE_CMD_MAIN),
TestLoraOpen, TestLoraOpen, open lora device and read parameters);
#endif