forked from xuos/xiuos
change xidatong to xidatong-arm32 on nuttx 10.3.0
This commit is contained in:
wgzAIIT
@@ -0,0 +1,68 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_IMXRT_LPUART8=y
|
||||
CONFIG_LPUART8_RXBUFSIZE=128
|
||||
CONFIG_LPUART8_TXBUFSIZE=128
|
||||
CONFIG_LPUART8_BAUD=115200
|
||||
CONFIG_LPUART8_BITS=8
|
||||
CONFIG_LPUART8_PARITY=0
|
||||
CONFIG_LPUART8_2STOP=0
|
||||
CONFIG_LPUART8_NOIFLOWCONTROL=y
|
||||
CONFIG_SUPPORT_CONNECTION_FRAMEWORK=y
|
||||
CONFIG_CONNECTION_FRAMEWORK_DEBUG=y
|
||||
CONFIG_CONNECTION_ADAPTER_4G=y
|
||||
CONFIG_ADAPTER_EC200T=y
|
||||
CONFIG_ADAPTER_4G_EC200T="ec200t"
|
||||
CONFIG_ADAPTER_EC200T_DRIVER="/dev/ttyS8"
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,65 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_BSP_USING_CH438=y
|
||||
CONFIG_CH438_EXTUART2=y
|
||||
CONFIG_CH438_EXTUART2_BAUD=9600
|
||||
CONFIG_SUPPORT_CONNECTION_FRAMEWORK=y
|
||||
CONFIG_CONNECTION_FRAMEWORK_DEBUG=y
|
||||
CONFIG_CONNECTION_ADAPTER_BLUETOOTH=y
|
||||
CONFIG_ADAPTER_HC08=y
|
||||
CONFIG_ADAPTER_BLUETOOTH_HC08="hc08"
|
||||
CONFIG_ADAPTER_HC08_WORK_ROLE="M"
|
||||
CONFIG_ADAPTER_HC08_DRIVER_EXTUART=y
|
||||
CONFIG_ADAPTER_HC08_DRIVER="/dev/extuart_dev2"
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,74 @@
|
||||
############################################################################
|
||||
# boards/arm/imxrt/xidatong-arm32/configs/knsh/Make.defs
|
||||
#
|
||||
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||
# contributor license agreements. See the NOTICE file distributed with
|
||||
# this work for additional information regarding copyright ownership. The
|
||||
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||
# "License"); you may not use this file except in compliance with the
|
||||
# License. You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||
# License for the specific language governing permissions and limitations
|
||||
# under the License.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include $(TOPDIR)/.config
|
||||
include $(TOPDIR)/tools/Config.mk
|
||||
include $(TOPDIR)/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT1 = memory.ld
|
||||
LDSCRIPT2 = kernel-space.ld
|
||||
|
||||
ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT1)}"
|
||||
ARCHSCRIPT += -T "${shell cygpath -w $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT2)}"
|
||||
else
|
||||
ARCHSCRIPT = -T$(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT1)
|
||||
ARCHSCRIPT += -T$(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT2)
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION)
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -fno-strict-aliasing
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS := $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
|
||||
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
# Loadable module definitions
|
||||
|
||||
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
|
||||
|
||||
LDMODULEFLAGS = -r -e module_initialize
|
||||
ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
|
||||
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libs/libc/modlib/gnu-elf.ld}"
|
||||
else
|
||||
LDMODULEFLAGS += -T $(TOPDIR)/libs/libc/modlib/gnu-elf.ld
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
@@ -0,0 +1,57 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
# CONFIG_ARCH_RAMFUNCS is not set
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_LAZYFPU=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_ARM_MPU=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILD_PROTECTED=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_DISABLE_MKRD=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_NUTTX_USERSPACE=0x60200000
|
||||
CONFIG_PASS1_BUILDIR="boards/arm/imxrt/xidatong-arm32/kernel"
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=8
|
||||
CONFIG_START_MONTH=6
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_SYS_RESERVED=9
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
+109
@@ -0,0 +1,109 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
|
||||
CONFIG_IMXRT_LPI2C=y
|
||||
CONFIG_IMXRT_LCD=y
|
||||
CONFIG_IMXRT_LPI2C1=y
|
||||
CONFIG_LPI2C1_BUSYIDLE=0
|
||||
CONFIG_LPI2C1_FILTSCL=0
|
||||
CONFIG_LPI2C1_FILTSDA=0
|
||||
CONFIG_IMXRT_GPIO2_16_31_IRQ=y
|
||||
|
||||
CONFIG_IMXRT_LPI2C_DYNTIMEO=y
|
||||
CONFIG_IMXRT_LPI2C_DYNTIMEO_USECPERBYTE=500
|
||||
CONFIG_IMXRT_LPI2C_DYNTIMEO_STARTSTOP=1000
|
||||
CONFIG_IMXRT_LPI2C_TIMEOSEC=0
|
||||
CONFIG_IMXRT_LCD_VIDEO_PLL_FREQ=92000000
|
||||
CONFIG_IMXRT_LCD_VRAMBASE=0x80000000
|
||||
CONFIG_IMXRT_LCD_REFRESH_FREQ=60
|
||||
CONFIG_IMXRT_LCD_BACKLIGHT=y
|
||||
CONFIG_IMXRT_LCD_INPUT_BPP16=y
|
||||
CONFIG_IMXRT_LCD_OUTPUT_16=y
|
||||
CONFIG_IMXRT_LCD_BACKCOLOR=0x0
|
||||
CONFIG_IMXRT_LCD_HWIDTH=480
|
||||
CONFIG_IMXRT_LCD_HPULSE=41
|
||||
CONFIG_IMXRT_LCD_HFRONTPORCH=4
|
||||
CONFIG_IMXRT_LCD_HBACKPORCH=8
|
||||
CONFIG_IMXRT_LCD_VHEIGHT=272
|
||||
CONFIG_IMXRT_LCD_VPULSE=10
|
||||
CONFIG_IMXRT_LCD_VFRONTPORCH=4
|
||||
CONFIG_IMXRT_LCD_VBACKPORCH=2
|
||||
CONFIG_IMXRT_DATAEN_ACTIVE_HIGH=y
|
||||
CONFIG_IMXRT_DATA_RISING_EDGE=y
|
||||
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_DRIVER=y
|
||||
CONFIG_ARCH_HAVE_SPI_CS_CONTROL=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
|
||||
CONFIG_FB_MODULEINFO=y
|
||||
CONFIG_DRIVERS_VIDEO=y
|
||||
CONFIG_VIDEO_FB=y
|
||||
CONFIG_INPUT=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_INPUT_GT9XX=y
|
||||
|
||||
CONFIG_FS_PROCFS=y
|
||||
CONFIG_FS_PROCFS_MAX_TASKS=128
|
||||
CONFIG_FS_PROCFS_EXCLUDE_ENVIRON=y
|
||||
|
||||
CONFIG_EXAMPLES_FB=y
|
||||
CONFIG_EXAMPLES_FB_DEFAULTFB="/dev/fb0"
|
||||
CONFIG_EXAMPLES_FB_PROGNAME="fb"
|
||||
CONFIG_EXAMPLES_FB_PRIORITY=100
|
||||
CONFIG_EXAMPLES_FB_STACKSIZE=2048
|
||||
|
||||
CONFIG_EXAMPLES_TOUCHSCREEN=y
|
||||
CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
|
||||
CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
|
||||
CONFIG_EXAMPLES_TOUCHSCREEN_NSAMPLES=0
|
||||
|
||||
@@ -0,0 +1,85 @@
|
||||
############################################################################
|
||||
# boards/arm/imxrt/xidatong-arm32/configs/libcxxtest/Make.defs
|
||||
#
|
||||
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||
# contributor license agreements. See the NOTICE file distributed with
|
||||
# this work for additional information regarding copyright ownership. The
|
||||
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||
# "License"); you may not use this file except in compliance with the
|
||||
# License. You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||
# License for the specific language governing permissions and limitations
|
||||
# under the License.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include $(TOPDIR)/.config
|
||||
include $(TOPDIR)/tools/Config.mk
|
||||
include $(TOPDIR)/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(CONFIG_ARMV7M_DTCM),y)
|
||||
LDSCRIPT = flash-dtcm.ld
|
||||
else
|
||||
LDSCRIPT = flash-ocram.ld
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||
else
|
||||
ARCHSCRIPT = -T$(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing \
|
||||
-fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ifeq ($(CONFIG_CXX_EXCEPTION),y)
|
||||
ARCHCPUFLAGSXX = -fno-builtin
|
||||
else
|
||||
ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions -fcheck-new
|
||||
endif
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef #-fno-strict-aliasing
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
|
||||
CFLAGS := $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHXXINCLUDES)
|
||||
CXXFLAGS += $(ARCHDEFINES) $(EXTRAFLAGS) -pipe -std=c++11
|
||||
CXXFLAGS += -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
CXXFLAGS += -pedantic -D_DEBUG -D_LIBCPP_BUILD_STATIC -D_LIBCPP_NO_EXCEPTIONS
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
|
||||
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
# Loadable module definitions
|
||||
|
||||
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
|
||||
|
||||
LDMODULEFLAGS = -r -e module_initialize
|
||||
ifeq ($(CONFIG_CYGWIN_WINTOOL),y)
|
||||
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libs/libc/modlib/gnu-elf.ld}"
|
||||
else
|
||||
LDMODULEFLAGS += -T $(TOPDIR)/libs/libc/modlib/gnu-elf.ld
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
@@ -0,0 +1,56 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_BOARD_LATE_INITIALIZE=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=20000
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_C99_BOOL8=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LIBCXX=y
|
||||
CONFIG_LIBCXXABI=y
|
||||
CONFIG_LIBC_FLOATINGPOINT=y
|
||||
CONFIG_LIBC_LOCALTIME=y
|
||||
CONFIG_LIBM=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=536870912
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_CPULOAD=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,65 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_BSP_USING_CH438=y
|
||||
CONFIG_CH438_EXTUART3=y
|
||||
CONFIG_SUPPORT_CONNECTION_FRAMEWORK=y
|
||||
CONFIG_CONNECTION_FRAMEWORK_DEBUG=y
|
||||
CONFIG_CONNECTION_ADAPTER_LORA=y
|
||||
CONFIG_ADAPTER_E220=y
|
||||
CONFIG_ADAPTER_LORA_E220="e220"
|
||||
CONFIG_ADAPTER_E220_DRIVER_EXTUART=y
|
||||
CONFIG_ADAPTER_E220_DRIVER="/dev/extuart_dev3"
|
||||
CONFIG_ADAPTER_E220_M0_PATH="/dev/gpout0"
|
||||
CONFIG_ADAPTER_E220_M1_PATH="/dev/gpout1"
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,79 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
# CONFIG_ARCH_LEDS is not set
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_ETH0_PHY_LAN8720=y
|
||||
CONFIG_IMXRT_ENET_PHYINIT=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_ENET=y
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LIBC_HOSTNAME="i.MXRT1050 EVK"
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_NETDEV_STATISTICS=y
|
||||
CONFIG_NETINIT_NOMAC=y
|
||||
CONFIG_NETUTILS_TELNETD=y
|
||||
CONFIG_NET_ARP_SEND=y
|
||||
CONFIG_NET_BROADCAST=y
|
||||
CONFIG_NET_ICMP=y
|
||||
CONFIG_NET_ICMP_SOCKET=y
|
||||
CONFIG_NET_ICMPv6=y
|
||||
CONFIG_NET_ICMPv6_NEIGHBOR=y
|
||||
CONFIG_NET_ICMPv6_SOCKET=y
|
||||
CONFIG_NET_IPv6=y
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_STATISTICS=y
|
||||
CONFIG_NET_TCP=y
|
||||
CONFIG_NET_TCPBACKLOG=y
|
||||
CONFIG_NET_TCP_WRITE_BUFFERS=y
|
||||
CONFIG_NET_UDP=y
|
||||
CONFIG_NET_UDP_WRITE_BUFFERS=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_LPWORK=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_SYSTEM_PING6=y
|
||||
CONFIG_SYSTEM_PING=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,54 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,73 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO2_16_31_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_IMXRT_USDHC1=y
|
||||
CONFIG_IMXRT_USDHC1_WIDTH_D1_D4=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_IOB_NBUFFERS=24
|
||||
CONFIG_IOB_NCHAINS=8
|
||||
CONFIG_LIBC_STRERROR=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_MMCSD=y
|
||||
CONFIG_MMCSD_SDIO=y
|
||||
CONFIG_MM_IOB=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_CMDOPT_DD_STATS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=32768
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_CHILD_STATUS=y
|
||||
CONFIG_SCHED_HAVE_PARENT=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_LPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_SDIO_BLOCKSETUP=y
|
||||
CONFIG_SERIAL_TERMIOS=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_CLE_CMD_HISTORY=y
|
||||
CONFIG_SYSTEM_COLOR_CLE=y
|
||||
CONFIG_FS_AUTOMOUNTER=y
|
||||
CONFIG_XIDATONG_ARM32_SDIO_AUTOMOUNT=y
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
@@ -0,0 +1,72 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_IOB_NBUFFERS=24
|
||||
CONFIG_IOB_NCHAINS=8
|
||||
CONFIG_LIBC_STRERROR=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_MM_IOB=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_CMDOPT_DD_STATS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=32768
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_CHILD_STATUS=y
|
||||
CONFIG_SCHED_HAVE_PARENT=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_LPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_SERIAL_TERMIOS=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_CLE_CMD_HISTORY=y
|
||||
CONFIG_SYSTEM_COLOR_CLE=y
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_IMXRT_USBOTG=y
|
||||
CONFIG_IMXRT_USBDEV=y
|
||||
CONFIG_USBDEV=y
|
||||
CONFIG_USBHOST=y
|
||||
CONFIG_USBHOST_MSC=y
|
||||
CONFIG_USBHOST_MSC_NOTIFIER=y
|
||||
CONFIG_XIDATONG_ARM32_USB_AUTOMOUNT=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
+61
@@ -0,0 +1,61 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_IMXRT_LPUART2=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_LPUART2_SERIALDRIVER=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_CONNECTION_FRAMEWORK_DEBUG=y
|
||||
CONFIG_CONNECTION_ADAPTER_WIFI=y
|
||||
CONFIG_ADAPTER_ESP07S_WIFI=y
|
||||
CONFIG_ADAPTER_WIFI_ESP07S="esp07s_wifi"
|
||||
CONFIG_ADAPTER_ESP07S_DRIVER="/dev/ttyS2"
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
+64
@@ -0,0 +1,64 @@
|
||||
#
|
||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||
#
|
||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||
# modifications.
|
||||
#
|
||||
CONFIG_ADD_NUTTX_FETURES=y
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_BOARD="xidatong-arm32"
|
||||
CONFIG_ARCH_BOARD_XIDATONG_ARM32=y
|
||||
CONFIG_ARCH_CHIP="imxrt"
|
||||
CONFIG_ARCH_CHIP_IMXRT=y
|
||||
CONFIG_ARCH_CHIP_MIMXRT1052CVL5B=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=10240
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARMV7M_DCACHE=y
|
||||
CONFIG_ARMV7M_DCACHE_WRITETHROUGH=y
|
||||
CONFIG_ARMV7M_ICACHE=y
|
||||
CONFIG_ARMV7M_USEBASEPRI=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=104926
|
||||
CONFIG_BUILTIN=y
|
||||
CONFIG_CLOCK_MONOTONIC=y
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
CONFIG_IMXRT_GPIO_IRQ=y
|
||||
CONFIG_IMXRT_GPIO3_0_15_IRQ=y
|
||||
CONFIG_IDLETHREAD_STACKSIZE=2048
|
||||
CONFIG_IMXRT_LPUART1=y
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_LPUART1_SERIAL_CONSOLE=y
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_READLINE=y
|
||||
CONFIG_RAM_SIZE=524288
|
||||
CONFIG_RAM_START=0x20200000
|
||||
CONFIG_RAW_BINARY=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
CONFIG_START_DAY=14
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_SYSTEM_NSH=y
|
||||
CONFIG_DEV_GPIO=y
|
||||
CONFIG_READLINE_CMD_HISTORY=y
|
||||
CONFIG_READLINE_CMD_HISTORY_LEN=100
|
||||
CONFIG_READLINE_CMD_HISTORY_LINELEN=120
|
||||
CONFIG_READLINE_TABCOMPLETION=y
|
||||
CONFIG_FS_ROMFS=y
|
||||
CONFIG_NSH_ROMFSETC=y
|
||||
CONFIG_NSH_ARCHROMFS=y
|
||||
CONFIG_BOARDCTL_RESET=y
|
||||
CONFIG_BSP_USING_CH438=y
|
||||
CONFIG_CH438_EXTUART1=y
|
||||
CONFIG_SUPPORT_CONNECTION_FRAMEWORK=y
|
||||
CONFIG_CONNECTION_FRAMEWORK_DEBUG=y
|
||||
CONFIG_SUPPORT_CONNECTION_FRAMEWORK=y
|
||||
CONFIG_CONNECTION_ADAPTER_ZIGBEE=y
|
||||
CONFIG_ADAPTER_E18=y
|
||||
CONFIG_ADAPTER_ZIGBEE_E18="e18"
|
||||
CONFIG_AS_END_DEVICE_ROLE=y
|
||||
CONFIG_ADAPTER_E18_DRIVER="/dev/extuart_dev1"
|
||||
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||
Reference in New Issue
Block a user