/*
 * Copyright (c) 2020 AIIT XUOS Lab
 * XiUOS is licensed under Mulan PSL v2.
 * You can use this software according to the terms and conditions of the Mulan PSL v2.
 * You may obtain a copy of Mulan PSL v2 at:
 *        http://license.coscl.org.cn/MulanPSL2
 * THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY KIND,
 * EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO NON-INFRINGEMENT,
 * MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
 * See the Mulan PSL v2 for more details.
 */

#include "lwip/opt.h"
#include "lwip/def.h"
#include "lwip/mem.h"
#include "lwip/pbuf.h"
#include "lwip/stats.h"
#include "lwip/snmp.h"
#include "lwip/ethip6.h"
#include "lwip/etharp.h"
#include "libserial.h"
/* Define those to better describe your network interface. */
#define IFNAME0 'e'
#define IFNAME1 'n'

/**
 * In this function, the hardware should be initialized.
 * Called from ethernetif_init().
 *
 * @param netif the already initialized lwip network interface structure
 *        for this ethernetif
 */
static void low_level_init(struct netif *netif)
{
#if LWIP_ARP || LWIP_ETHERNET

    /* set MAC hardware address length */
    netif->hwaddr_len = ETH_HWADDR_LEN;

    /* set MAC hardware address */
    netif->hwaddr[0] = 0x02;
    netif->hwaddr[1] = 0x12;
    netif->hwaddr[2] = 0x34;
    netif->hwaddr[3] = 0x56;
    netif->hwaddr[4] = 0x78;
    netif->hwaddr[5] = 0xab;
    netif->hwaddr_len = 6;

     /* maximum transfer unit */
     netif->mtu = 1500;

#if LWIP_ARP
     netif->flags |= NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP;
#else
     netif->flags |= NETIF_FLAG_BROADCAST;
#endif /* LWIP_ARP */

#endif /* LWIP_ARP || LWIP_ETHERNET */
  
}

/**
 * This function should do the actual transmission of the packet. The packet is
 * contained in the pbuf that is passed to the function. This pbuf
 * might be chained.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type)
 * @return ERR_OK if the packet could be sent
 *         an err_t value if the packet couldn't be sent
 *
 * @note Returning ERR_MEM here if a DMA queue of your MAC is full can lead to
 *       strange results. You might consider waiting for space in the DMA queue
 *       to become available since the stack doesn't retry to send a packet
 *       dropped because of memory failure (except for the TCP timers).
 */

static err_t low_level_output(struct netif *netif, struct pbuf *p)
{
  char buf[1518];
#if ETH_PAD_SIZE
  pbuf_remove_header(p, ETH_PAD_SIZE); /* drop the padding word */
#endif

  pbuf_copy_partial(p, buf, p->tot_len, 0);
  
  printf("output %s\n", buf);
  return ERR_OK;
}

/**
 * Should allocate a pbuf and transfer the bytes of the incoming
 * packet from the interface into the pbuf.
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return a pbuf filled with the received packet (including MAC header)
 *         NULL on memory error
 */
static struct pbuf* low_level_input(struct netif *netif)
{
  struct pbuf *p=NULL, *q=NULL;
  return p;
}

/**
 * This function should be called when a packet is ready to be read
 * from the interface. It uses the function low_level_input() that
 * should handle the actual reception of bytes from the network
 * interface. Then the type of the received packet is determined and
 * the appropriate input function is called.
 *
 * @param netif the lwip network interface structure for this ethernetif
 */
void ethernetif_input(struct netif *netif)
{
  struct ethernetif *ethernetif;
  struct eth_hdr *ethhdr;
  struct pbuf *p;

  ethernetif = netif->state;

  /* move received packet into a new pbuf */
  p = low_level_input(netif);
  /* if no packet could be read, silently ignore this */
  if (p != NULL) {
    /* pass all packets to ethernet_input, which decides what packets it supports */
    if (netif->input(p, netif) != ERR_OK) {
      LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_input: IP input error\n"));
      pbuf_free(p);
      p = NULL;
    }
  }
}

/**
 * Should be called at the beginning of the program to set up the
 * network interface. It calls the function low_level_init() to do the
 * actual setup of the hardware.
 *
 * This function should be passed as a parameter to netif_add().
 *
 * @param netif the lwip network interface structure for this ethernetif
 * @return ERR_OK if the loopif is initialized
 *         ERR_MEM if private data couldn't be allocated
 *         any other err_t on error
 */
err_t ethernetif_init(struct netif *netif)
{
  LWIP_ASSERT("netif != NULL", (netif != NULL));

#if LWIP_NETIF_HOSTNAME
  /* Initialize interface hostname */
  netif->hostname = "lwip";
#endif /* LWIP_NETIF_HOSTNAME */

  /*
   * Initialize the snmp variables and counters inside the struct netif.
   * The last argument should be replaced with your link speed, in units
   * of bits per second.
   */
  MIB2_INIT_NETIF(netif, snmp_ifType_ethernet_csmacd, 100000000);

  netif->name[0] = IFNAME0;
  netif->name[1] = IFNAME1;
#if LWIP_IPV4
  netif->output = etharp_output;
#endif /* LWIP_IPV4 */
#if LWIP_IPV6
  netif->output_ip6 = ethip6_output;
#endif /* LWIP_IPV6 */
  netif->linkoutput = low_level_output;

  /* initialize the hardware */
  low_level_init(netif);

  return ERR_OK;
}